Small Industries Development Corporation Limited has published Renovation Repairing Of Street Lighting By Way Of Replacing Sodium Vapour Lamps With Led Lights At Ic Ompora Budgam. Renovation Repairing Of Street Lighting By Way Of Replacing Sodium Vapour Lamps With Led Lights At Ic Ompora Budgam.. Submission Date for this Tender is 26-10-2021. LED Light Tenders in Ompora Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Note: Contractor should Quote Rates with all taxes. |
| 2 | Servo Stabilizer Fabrication, supply, erection, testing and commissioning of KVA servo controlled automatic voltage regulator transformer with Buck boost transformer Input voltage 240-450 p-p Output Voltage400V p-p 230 N-P Over load protection Single phase preventer Under voltage protection High voltage protection Delay line output Material Copper All protections through micro controller Oil Cooled Un-balanced type The stabilizer shall be provided with first filling of fresh transformer oil. Sheet gauge used for fabrication of stabilizer should not be less than 14 SWG Speed of correction should not be less than 10-20 volt per second efficiency more than 90% 20 KVA |
| 3 | Steel Tubular Poles Supply and erection of Road lighting on steel tubular pole swaged type conforming to IS 2713-(Part-III), pole designation 410-SP-12 complete with base plate, of 300mmx300mmx6mm(lxBxW), drilling of 25mm dia hole at 2.74 Mts from bottom for entry of wire. The Pole to be painted with one coat of primer and two coats of silver white aluminium paint and underground section of the pole is to be painted with one coat of primer and two coats of black enamel paint both inner and outer side. The pole is to be erected by execution of 5 feet x2feet x2 feet pole[pit including making foundation in cement concrete in the ratio of 1:2:4( 1 cement: 2 coarse sand: 4 graded stone, 40 mm dia nominal), the foundation is to be continued upto 0.3 M above ground level around the pole tapered suitably into the collar in round shape of 0.5 M in dia. The exposed portion of the block is to be plastered properly and white washed. The job includes excavation of pole pit refilling and removal of excavated material from the site and properly disposed off, complete job in all respect. |
| 4 | Luminaire S/I/T/C of 45 watt LED in existing Poles with replacing of Old lights in Havells Philips Bajaj, Crompton Greaves, Syska, Panasonicor as approved by site incharge . complete in all respect the oldlights to be handed over to store |
| 5 | Pole Bracket Fabrication, supply, installation and fixing of pole bracket made out of 32 mm dia G.I pipe medium class 1.5 Mtr long including accessories including bending the pipe to the required shape, 2 no.s 40mm x 3mm flat iron clamps with suitable size nuts , bolts and washer, painting the flat iron with primer and finish paint etc as required suitable for fixing of 36-50W LED luminary. |
| 6 | Cable Looping Box(Connection Box) Fabrication, supply, fixing and connectioning of dust and weather proof, gasketted, canopy type connection box made out of 16 SWG MS sheet 250mm x 250mm x 200mm in size. The connection box is to be fitted with2 Nos. MS 2 strips 250mm x40mm x5mm on its back side with 2 No. hole on each strip for fixing of box with strip by suitable size nut and bolts. The MS strips shall have to be welded with pole at appropriate place around the existing hole on the pole. the box shall have to provide with hinged cover, locking arrangement, earth studs, neoprene gasket, terminal strip 60A four way, MCB carrier for two no. MCB’s complete with connections, two no. 40mm dia hole at bottom and 25mm dia hole and centre of back sideof the box. The box shall be painted with one coat of primer and two coats of silver white Aluminium paint, complete job in |
| 7 | G.I Pipe for Cable Protection along pole(Vertical Length) Supply, bending, threading and fixing of G.I pipe class-B, 40mm dia, 3M long along the pole for protection of cable .the top end of the pipe be threaded suitable for fixing of connection box with check nuts inside the connection box. The pipe is to be suitably bended to size for smooth entry of cable not less than 12 times the diameter of pipe as per diagram and complete job in all respects |
| 8 | MCB’s Supply and fixing of B-series SP MCB 5A,240V, miniature circuit breaker suitable for inductive load of single pole in existing connection box complete with connections, testing and commissioning etc as required |
| 9 | Connection Wire Supply and fixing of 2x1.5 Sq mm connection wire + 1x1.5 Sq mm earth wire PVC insulated , copper conductor single core multi stranded cable from connection box upto light fixture in existing Poles and new Poles complete with connections etc as required. |
| 10 | Cable Supply, laying, Testing and commissioning of KV gradeAluminum conductor, PVC insulated, PVC sheathed, steel armoured cable 0.75M below ground including digging of trench 0.35M wide 0.75 M depth ,providing of sand cushioning, protective covering with second class bricks as per specifications,and refilling the trench, etc as required complete Job |
| 11 | a)4x16 Sq.mm |
| 12 | b)4x10 Sq.mm |
| 13 | Earth Wire Supply, Laying, connecting 8 SWG G.I Earth wire along with cable including binding in existing trench as required. |
| 14 | G.I. Pipe for Road/ Gate Crossing. Provided and laying of G.I.Pipe class-B for gate/road crossing 0.75 M below ground etc after excavation and back filling the same by way of sand cushion and p/l of RBM 9” thick, two coats of grade II and top p/l cement concrete in mix 1.1.5.3 at the top of road/ gate crossing as required complete job. a). 75mm |
| 15 | G.I Pipe Earthing. Earthing with G.I earth pipe 4.5 Mts long 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 16 | Distribution box: Fabrication, supply, fixing and connectioning of dust and weather proof , gasketted ,canopy type connection box made out of 16SWG MS sheet 450mmx350mmx200mm (LBW) in size. The connection box is to be welded with2 No’s Angle Iron 25mmx25mm size 4 feet long which should be grouted at least 1 feet below ground level with 3 above ground and 2 feetunderground in cement concrete, the box should have the provision for 4 pole aluminiumBusbar and also having the provision for fixingof 4 pole MCB’s. The box shall be painted with one coat of primer and two coats of paint, locking arrangement etc and consisting of following items (Pb1,Pb2) 1 No 32 Amp |
| 17 | Painting of existing poles with one coat of Red oxide and two coats of aluminium Paintclearing the Surface from rust with sand Paper (complete job in all respect |
| 18 | Feeder Pillar S/I/T/C of Panel enclosure outdoor type 36’’(h )x 42’’(w)x12’’(d) made out of 16mm thick CRC sheet powder coated free standing,having front doors mounted on MS Angle Iron Pedestal of Height 24’’ comprising of the following Incomer MCCB 100Amp 4 Pole 35 K with spreaders links and phase barriers1 set Onload bypass switch 100 amp 4 pole 1 No Contactor 100 Amp (9AC1) 4 Pole with wide band coil 1 No Astronomical timer1 No Busbar TPN Aluminium 100 Amp covered with heat shrinkable sleeves mounted on DMC Busbar supports1 set Digital VAF,PF Meter with phase indication lamps & CT’s 1 set Out going MCB 32 A 4 pole 10 KA 4 No’s Wire and other panel accessories |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
