Sub:Inviting Quotations For Procurement Of Digital Area Zone Monitor For Nuclear Medicine Department, At Aiims Raipur.- 1 Digital Area Zone Monitor (Wall Mounted) Specification: 1.Wall Mount Area Monitor Should Be Based On Gm. 2.Display: Should Be 4 -Chhattisgarh

Sub:Inviting Quotations For Procurement Of Digital Area Zone Monitor For Nuclear Medicine Department, At Aiims Raipur.- 1 Digital Area Zone Monitor (Wall Mounted) Specification: 1.Wall Mount Area Monitor Should Be Based On Gm. 2.Display: Should Be 4 Digit Led Display With 0.8” (2Cm) 3.Display Range: Should Be 0-9999 4.Display Units: Can Be Made To Diosplay In Ur / Hr Mr/Hr,R/Hr, Usv/H,Msv/H, Sv/H, Cpm, Cps,. (Should Be Optional. 5.Linearity: Reading Within Plus On Minus 10% Of True Value. 6.Low Alarm : Indicated By A Yellow Light And Slow Beep 1 Per Second) Audible Tone (Can Be Set At Any Point From 0-9999) 7.High Alarm: Indicated By A Red Light And Fast Beep (4 Per Second) Audible Tone. 8.Low Bat: (Yellow) Indicates less than 2 hours of battery power remaining 9.Warranty: 24 months. Ethernet(optional): 10 Base – T connection for use with software. Calibration Controls: Accessible from the front of instrument (protective cover provided) High Voltage: User- adjustable from 200 to 2500 volts. Dead Time: User- adjustable to compensate for dead time of the detector and electronics (can be read off the display) Audio: Can vary from approximately 68 dB to 100 dB through operation of the external rotary baffle and the internal voltage connection. RS-232 OUTPUT: a 2-second dump for computer data logging. POWER: 9 Vdc wall –mount adapter with four sets of prongs for almost any style wall receptacle. Construction : Should be aluminum housing with ivory power- coat finish. AERB certified laboratory calibration certificate should be provided by vendor at the time of instrument delivery. Battery Life: Typhically 48 hours in non-alarm condition ; 12 hours in alarm condition. Battery Charger: Battery charger should be optional 8.Low Bat: (Yellow) Indicates less than 2 hours of battery power remaining 9.Warranty: 24 months. Ethernet(optional): 10 Base – T connection for use with software. Calibration Controls: Accessible from the front of instrument (protective cover provided) High Voltage: User- adjustable from 200 to 2500 volts. Dead Time: User- adjustable to compensate for dead time of the detector and electronics (can be read off the display) Audio: Can vary from approximately 68 dB to 100 dB through operation of the external rotary baffle and the internal voltage connection. RS-232 OUTPUT: a 2-second dump for computer data logging. POWER: 9 Vdc wall –mount adapter with four sets of prongs for almost any style wall receptacle. Construction : Should be aluminum housing with ivory power- coat finish. AERB certified laboratory calibration certificate should be provided by vendor at the time of instrument delivery. Battery Life: Typhically 48 hours in non-alarm condition ; 12 hours in alarm condition. Battery Charger: Battery charger should be optional

Refer document

Refer document