|
| 1 | PROVISION OF RAIN WATER TAPPING FOR CERTAIN BUILDINGS AT MINICOY.Supply and fix rotational moulded polythylene water storage tank of 1000 Ltr (multi layers cylinderical vertical with closed top) hoisted and fixed in position for the following capacity including 25mm Ball valves high pressure of PTMT witth epoxy coated Aluminium rod& high-density plastic ball srewed for iron pipe and fixed (minimum weight 25mm-142gms) complete all as specified and as directed by Engineer-in-charge. |
| 2 | Supply and fix PVC SWR pipes, 110 mm dia bore, single socketed, in any length with using rubber joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-charge. |
| 3 | Supply and fix 110mm PVC(SWR) pipes single socketed, any length with rubber rings joints, fixed to walls complete all as specified and as directed by Engineer-in-charge. |
| 4 | Supply and fix PVC (SWR) bends of 110mm dia bore complete all as specified and as directed by Engineer-in-charge. |
| 5 | Supply and fix PVC (SWR) bends with access door of 110mm dia of bore complete all as specified and as directed by Engineer-in-charge. |
| 6 | Supply and fix PVC (SWR) T with access door of 110mm dia of bore. |
| 7 | Supply and fix 225 mm bore half PVC(SWR) pipes single socketed includingsupporting PVC clamps/ brackets of any length with rubber rings joints, fixed to walls and roof edges of slop roof buildings complete all as specified and as directed by Engineer-in-charge. |
| 8 | Excavation over areas and getting outsoft/ loose soil complete all as specified and as directed by Engineer-in-charge. |
| 9 | Material and labour for PCC (1:4:8), Type D-2 using 40mm graded aggregate,concrete bed in foundation filling or mass concrete, complete all as specified and as directed by Engineer-in-charge. |
| 10 | Material and labour for precast cementconcrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 Type C1, (1:3:6) using 20mm gradded aggegate, complete all as specified and as directed by Engineer-in-charge. |
| 11 | Material and labour for Rendering in CM (1:4), 15 mm thick on fair faces of brick work or concrete surfacesfinished fair and even without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 12 | Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth and getting out in soft/loose soil for removal of old pipes/ laying of new pipes complete all as specified & directed by Enginner In Charge. |
| 13 | Material and labour for PCC (1:4:8) Type D2, using 40mm graded aggregate,concrete bed to drain pipe 110mm dia bore, including packing under, and haunching against sides of pipes after they are laid and tested in complete all as specified and as directed by Engineer-in-charge. |
| 14 | Returning filling in including spreading leveling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and as directed by Engineer-in-charge. |
| 15 | Removal of surplus soil to a distance exc 250 mtrs and n.exc 500 mtrs, depositing where directed complete all as specified and as directed by Engineer-in-charge. |
| 16 | Supply and fix GI flat, angle etc... as in support brackets for rainwater pipe suitably bend to shape as required, and fixed to wall with necessary bolting (non-corrosive), including necessary welding as required, complete all as specified and directed by Engineer-in-Charge. |
| 17 | SPECIAL REPAIRS TO ADMIN BLOCK BUILDING P-1 AT MINICOYDismantling timber scantlings in unframed work 40 sq. cm and over in section, in any position complete all as specified and as directed by Engineer-in-charge. |
| 18 | All as per Sl item No. 17 here-in-before but in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed by Engineer-in-charge. |
| 19 | Dismantling of ceiling boards any thickness including cover fillets etc complete all as specified and as directed by Engineer-in-charge. |
| 20 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed by Engineer-in-charge. |
| 21 | Demolition of RCC work of any description and in anyposition not otherwise specifically provided for(reinforcement cut as required to facilitate demolition) complete all as specified and as directed by Engineer-in-charge. |
| 22 | Demolition of PCC work in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-charge. |
| 23 | Demolition of brickwork or block masonry, built in cement mortar or cement lime mortar including all quoins,arches, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-charge. |
| 24 | Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water. |
| 25 | Material and labour for brick work with sub class \"B\" bricks straight or curved on plan exc 6.00 mtrs mean radius built in CM 1: 6 complete all as specified and as directed by Engineer-in-charge. |
| 26 | Material and labour for brickwork with subclass \"B\" bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:6) complete all as specified and as directed by Engineer-in-charge. |
| 27 | Material and labour for damp proof course to horizontal or vertical surface including necessary form work in PCC (1:2:4) type B-0, (using 12.5 mm graded stone aggregate) 40 mm thick complete all as specified and as directed by Engineer-in-charge. |
| 28 | Material and labour for RCC Type B1 (1:2:4) using 20 mm graded aggregate for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-charge. |
| 29 | Material and labour for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-charge. |
| 30 | Material and labour for Formwork to soffits of suspended flat slabs such as roof slabs, floor slabs, landings and similar work finished fair surfaces not exceeding 200mm thick (Horizontal or sloping complete all as specified and as directed by Engineer-in-charge. |
| 31 | Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engineer-in-charge. |
| 32 | Material and labour for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engineer-in-charge. |
| 33 | Material and labour for 10mm thick rendering on fair faces of brick work or concrete surface in CM (1:6) to be finished even and smooth with out using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 34 | Material and labour for 15 mm thick for rendering fair faces of brick work or Concrete surface in CM(1:4) mixed with integral water proofing compound @ 3% by weight of cement , finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. Note: Water proofing compund shall be measured and paid seperately |
| 35 | Supply only integral water proofing compound complete all as specified and as directed by Engineer-in-charge. |
| 36 | Material and labour for Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over 3mm thick wall care putty and a coat of alkali resistant primer |
| 37 | Material and labour for Preparation of Old decorative surfaces of wall and applying two coats of oil bound distemper with one coat wall care putty and a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-charge. |
| 38 | Preparation of new plaster surfaces in walls soffits, facia roof and applying one coats of weather proof acrylic based emulsion paint, 100% arylic, over a coat of primer complete all as specified and as directed by Engineer-in-charge. |
| 39 | Material and labour for Preparation of old decorated surfaces of walls soffits, facia roof and applying one coats of weather proof acrylic based emulsion paint 100% arylic over a coat of primer complete all as specified and as directed by Engineer-in-charge. |
| 40 | Supply and fix Anodised aluminium snap grid frame work for false ceiling all as specified size of grid 605x605 mm complete all as specified and as directed by Engineer-in-charge. |
| 41 | Supply and fix in repairs 12 mm thick perforated particle board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with GI imposed or timber grid frame work complete all as specified and as directed by Engineer-in-charge. |
| 42 | Supply and fix pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge. |
| 43 | All as per sl Item No. 42 here-in-before but 0.50 mm plain sheet complete all as specified and as directed by Engineer-in-charge. |
| 44 | Supply and fix Rolled MS sections as in main and cross beams, hip and jack rafters; purlins where connectedto common rafters and running rails and guides for sliding doors; fixedwithangle cleats or other connecting plates Fe-410-W (Gde-E-250) Quality A complete all as specified and as directed by Engineer-in-charge. |
| 45 | Material and labour for applying two coats of synthetic enamel paint over a red oxide primer on new or previously untreated steel and iron surfaces over 10cm width/girth incl preparation of surfaces complete all as specified and as directed by Engineer-in-charge. |
| 46 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-charge. |
| 47 | Supply and fix light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm), in floorsincluding15 mm thick screed bed or bedding layer in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-charge. |
| 48 | All as per Sl item No. 47 here-in-before but in vertical surfaces over 10mm thick rendering in CM 1:4 complete all as specified and as directed by Engineer-in-charge. |
| 49 | Material and labour for Cement concrete type C-2, 1:3:6 (40mm graded aggregate) of 75mm thick as in sub base complete all as specified and as directed by Engineer-in-charge. |
| 50 | Material and labour for Cement concrete type B-1, 1:2:4 (20mm graded aggregate of 25mm thick as in top layer complete all as specified and as directed by Engineer-in-charge. |
| 51 | Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc .11 Sqm but not exc 0.18 Sqm in floor including15mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-charge. |
| 52 | Material and labour for Glazed ceramic colour tiles in vertical surface 300x 450x 7 mm/ 300X 600X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick plaster in CM 1:4 complete all as specified and as directed by Engineer-in-charge. |
| 53 | Supply and fix in repairs curtain rails, mild steel, chromium plated with fixing brackets, stops,rollers etc complete all as specified and as directed by Engineer-in-charge. |
| 54 | Taking down Chowkhats or frames n. exc 1.5 sqm each(without taking off shutters from the frame) complete all as specified and as directed by Engineer-in-charge. |
| 55 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each(without taking off shutters from the frame) complete all as specified and as directed by Engineer-in-charge. |
| 56 | Supply and fix IInd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints, supplied and fixed complete all as specified and as directed by Engineer-in-charge. |
| 57 | Supply and fix 35mm thick II nd class HW Glazed andskeleton shuttersopen rebated and prepared to receive glass, gauze, etc. (without sash bars),edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified inSSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-charge. |
| 58 | Supply and fix 35mm II nd class HW rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreated complete all as specified and as directed by Engineer-in-charge. |
| 59 | Material and labour for preparing new wood & wood based surfaces of any descriptions exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-charge. |
| 60 | Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-charge. |
| 61 | Supply and fix MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-charge. |
| 62 | Supply and fix 150mm long aluminium anodised, barrel tower bolts of ex- truded section and fixed complete all as specified and as directed by Engineer-in-charge. |
| 63 | Supply and fix 125mm butthinges, heavy weight, cold rolled mild steel medium weight, and fixed complete all as specified and as directed by Engineer-in-charge. |
| 64 | Supply and fix 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-charge. |
| 65 | Supply and fix 150mmextruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-charge. |
| 66 | Supply and fix floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, 140mm overall length of cover plate complete all as specified and as directed by Engineer-in-charge. |
| 67 | Material and labour for Providing, cement concrete Type A-0 (1:2:4) using 12.5 mm graded aggregate ,in lintel upto 1.5m clear span ,cills,steps, seismic and other similar bands,plinth courses string courses parapets and railing upto 60 cm height coping and similar complete all as specified and as directed by Engineer-in-charge. |
| 68 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etc.for finished surfaces of concrete complete all as specified and as directed by Engineer-in-charge. |
| 69 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube etc complete all as specified and as directed by Engineer-in-charge. |
| 70 | Supply and fix factory made solid panel PVC doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete all as specified and as directed by Engineer-in-charge. |
| 71 | Supply and fix of Aluminium butt hinges, medium weight, cold rolled mild steel of 100 mm long complete all as specified and as directed by Engineer-in-charge. |
| 72 | Supply and fix aluminium ventilators top hung glazed and top hung mosquito mesh shutters and bottom fixed glazed shutters including all fittings and fixtures complete all as specified and as directed by Engineer-in-charge. |
| 73 | Supplying and laying of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-charge. |
| 74 | All as per Sl item No. 73 here-in-before but 20mm dia complete all as specified and as directed by Engineer-in-charge. |
| 75 | Cutting chases for concealed water tubing and making good to disturbed surfaces in CM (1:3), cutting not exc 10cm in girth complete all as specified and as directed by Engineer-in-charge. |
| 76 | Material and labour for CPVC Ball valves 20 mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engineer-in-charge. |
| 77 | Material and labour for CPVC Ball valves25 mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engineer-in-charge. |
| 78 | Dismantling water tanks capacity of exc 250 but not exc 500 ltr and removing to store complete all as specified and as directed by Engineer-in-charge. |
| 79 | Supply and fix rotational moulded polyethylene water storage tank cylindrical hoisted and fixed in position all as specified capacity 500 ltrs complete all as specified and as directed by Engineer-in-charge. |
| 80 | Supply and fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed by Engineer-in-charge. |
| 81 | Supply and fix Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in-charge. |
| 82 | Supply and fix 32mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls , ceilings or in floor etc complete all as specified and as directed by Engineer-in-charge. |
| 83 | Supply and fix flush pipe of polyethy of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed by Engineer-in-charge. |
| 84 | Supply and fix PVC low level flushing cistern of 10 ltr capacity fixed in repair including siphon float valve and rubber cone etc complete all as specified and as directed by Engineer-in-charge. |
| 85 | Supply and fix in repairs Vitreous China wash basin, wliite, flat back, size 550x400 mm excluding taps, waste, chain and plug andporcelainstopper but including brackets including cutting for and pinning in ends of brackets or erecting stand including Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms) of fixing of supply and waste pipe 32mm dia complete all as specified and as directed by Engineer-in-charge. |
| 86 | Supply and fix fancy type 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure , with or without l\"ettered \" \"HOT\" or \"COLD\" with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and as directed by Engineer-in-charge. |
| 87 | Supply and fix in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge. |
| 88 | Supply and fix in repair stop valves fancy type chromium plated15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends, fixed complete all as specified and as directed by Engineer-in-charge. |
| 89 | Supply and fix in repair stop valves fancy type chromium plasted with long shank and cup (concealed type) 20 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends, complete all as specified and as directed by Engineer-in-charge. |
| 90 | Supply and fix PVC connections 20 mm size with PTMT nuts of length 600 mm complete all as specified and as directed by Engineer-in-charge. |
| 91 | Supply and fix in repair 600 mmx 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers complete all as specified and as directed by Engineer-in-charge. |
| 92 | Supply and fix in repair Soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engineer-in-charge. |
| 93 | Supply and fix in repair Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engineer-in-charge. |
| 94 | Cutting into exisiting manholes for connecting new drains, making good to pipe and rendering ,cutting out existing benching for and forming branchchannel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished , and reforming benching as required for 150mm internal dia of pipe complete all as specified and as directed by Engineer-in-charge. |
| 95 | Material and labour for PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement complete all as specified and as directed by Engineer-in-charge. |
| 96 | Material and labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds,mitred stop ends etc complete all as specified and as directed by Engineer-in-charge. |
| 97 | Material and labour for PCC 1:4:8 Type D2 using 40mm graded aggregate,concrete bed to drain pipe 150mm dia bore, including packing under, and haunching against sides of pipes after they are laid and tested in complete all as specified and as directed by Engineer-in-charge. |
| 98 | Material and labour for PCC 1:3:6 type C2 using 40 mm graded aggregate for foundation bed concrete complete all as specified and as directed by Engineer-in-charge. |
| 99 | Material and labour for Precast cementconcrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 Type B1. 1:2:4,(20mm gradded aggegate) complete all as specified and as directed by Engineer-in-charge. |
| 100 | Material and labour for PCC 1:2:4 Type B1 using 20 mm graded aggregate for coping/benching finished exposed surface of concretefair and even complete all as specified and as directed by Engineer-in-charge. |
| 101 | Material and labour for Pre castRCC 1:2:4, type B1 using 20 mm graded aggregate for man hole cover set in CM 1:4 complete all as specified and as directed by Engineer-in-charge. |
| 102 | Material and labour for soakage pit of size 1.5M dia x 1.5M deep incl foundatioin in PCC 1:2:4, 23 cm thick honeycomb brick walling in CM 1:4 and outside of brick wall minimum 0.50 Mtr wide, filtration material consisting of hard core stone or burnt brick pieces ranging from 1/2 to 2 (15mm to 50mm) size and distribution arrangement etc... including removing the excavated material from pit and depositing at not exceeding 50 Mtr distance at a level not exceeding 1.5 Mtr the starting point, complete all as specified and as directed by Engineer-in-charge. |
| 103 | Supply and fix PVC SWR Vent Cowl 110 mm bore complete all as specified and as directed by Engineer-in-charge. |
| 104 | Supply and fix PVC (SWR) pipes 110mm bore single socketed, in any lengthwith rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-charge. |
| 105 | Supply and fix PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge. |
| 106 | Supply and fix PVC (SWR) 110mm bends any radius complete all as specified and as directed by Engineer-in-charge. |
| 107 | Supply and fix PVC (SWR)110mm branch piece, single (single Y) equal or unequal complete all as specified and as directed by Engineer-in-charge. |
| 108 | Supply and fix PVC (SWR),110mm junction single, (Single T) equal or unequal complete all as specified and as directed by Engineer-in-charge. |
| 109 | Taking down carefully existing aluminium/copper point wiring on battn or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power) complete and making good the disturbed surfaces of walls, floors, ceiling eyc to match with existing complete all as specified and as directed by Engineer-in-charge. |
| 110 | Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc for reuse at site or carrying to the store (to be measures only when found serviceable) complete all as specified and as directed by Engineer-in-charge. |
| 111 | Material and labour for Point wiring with PVC insulated unsheathed and multistranded copper conductor cable ISI marked, 1100 volt grade.FRLS of size 1.5 Sqmm drwan in and including concealed PVC rigid conduite of size not less than 20mm dia with MS box concealed and logic modular white plates of suitable size as required at site with PVC insulated unsheathed stranded copper conductor of size 1.5 Sqmm as earth wire connected commin earth dolly as specified for one light point controlled oneswitch for light/Fan complete all as specified and as directed by Engineer-in-charge.Note : (i) Rate quoted include cost of making MS box in concealed for cutting and sinking for boxes and making good walls, No extra payment will be made for the same. (ii) Rate include the logic modular plates.Necessary blank plate as required at site. |
| 112 | All as per above item no. 111 here in before but one 3 pin 5 amps switch sockets on independent board complete all as specified and as directed by Engineer-in-charge. |
| 113 | All as per above item no. 111 here in before but with cable size 2.5 Sqmm and 1.5 Sqmm as earthwire for 3/5 pin socket out let independent,15/16 Amps complete all as specified and as directed by Engineer-in-charge. |
| 114 | Supply and fix modular switch 1 way, 6A, 1 module complete all as specified and as directed by Engineer-in-charge. |
| 115 | Supply and fix modular socket, 6A- 2/3 pin combined 2 moduole complete all as specified and as directed by Engineer-in-charge. |
| 116 | Supply and fix modular switch 1 way, 16A, 1 module complete all as specified and as directed by Engineer-in-charge. |
| 117 | Supply and fix modular socket, 6/16A- 2/3 pin combined 2 moduole complete all as specified and as directed by Engineer-in-charge. |
| 118 | Supply and fix modular fan regulator 120 watt, 2 module, hume free complete all as specified and as directed by Engineer-in-charge. |
| 119 | Supply and fix ceiling rose three terminals polycarbonate isolated body complete all as specified and as directed by Engineer-in-charge. |
| 120 | Material and labour for submain wiring with 4 sqmm two single core (for phases and neutral) stranded copper conductor cable PVC (FRLS) insulated unshathed concealed and one run 4 sqmm PVC insulated multistranded copper conductor suitable size (concealed) ISI marked with accessories complete all as specified and as directed by Engineer-in-charge.Note : Three run of 4 sqmm and one run of PVC concealed conduit shall be measured as one run only. |
| 121 | Supply and fix MCB DB, SPN 8 way, double door, SPN 240 V with 200 A bus bar and separate link for common link for neutral and earth complete all as specified and as directed by Engineer-in-charge.Note: Blank spaces of DB shall be covered with blank plate. |
| 122 | Supply and fix Isolator DP 40 Amp 240 V, 50 Hz complete all as specified and as directed by Engineer-in-charge. |
| 123 | Supply and fix MCB SP 5 to 30 Amp, 240 V, B series complete all as specified and as directed by Engineer-in-charge. |
| 124 | Hanging only ceiling fan and connecting up including provision of cable from ceiling rose to fan complete all as specified and as directed by Engineer-in-charge. |
| 125 | Fixing only LED tube light fitting including provision of cable from ceiling rose to light complete all as specified and as directed by Engineer-in-charge.fitting |
