|
| 1 | Taking down carefully old unserviceable/ burnt copper/ aluminium point wiring of light, fan, socket or power point complete including fittings such as switches, ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, tube light fittings etc including switch boards etc removing material to store for keeping in safe custody or for re-use or issuing to contractor against Sch of credit and making good the disturbed surfaces of wall/ceiling etc so as to match with the existing surface complete all as specified and directed.Note for item No 1 to 3:- Quoted rate is deemed to be inclusive of making good the disturbed surfaces, filling of grooves with cement, plastering and painting with two coats to match with the existing colour after one coat of base primer all as specified. |
| 2 | Taking down carefully old unserviceable main switch, MCB, DB with MCBs of any size and capacity and making good the disturbed surfaces complete all as specified and directed. |
| 3 | Taking down carefully old unserviceable sub main wiring of any size, make, type & capacity and making good the disturbed surfaces complete all as specified and directed. |
| 4 | Material and labour for point wiring for one light point/ Fan point controlled by one switch complete with 1100Volts grade conforming toIS-694, 1.5 Sqmm (nominal area) PVC insulated, unsheathed, multistranded, FRLS copper conductor cable including circuit wire (Make: Havells/ Plaza/ Finolex/ Polycab) drawn through and including heavy grade rigidnon-metallic PVC conduit 20mm or higher dia (Make: Prestoplast/ Pressfit/ Finolex/ Precision) as required at site, totally concealed in walls/ floors/ ceiling/ roof including all conduit accessories/ fitting/ junction box/ inspection covers etc of heavy grade, ISI marked and sunken type pressed steel/ welded mild steel terminal box (ISI marked) factory made out of 16 gauge, MS sheet with hold fast totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/ cup washers, for mounting switches, sockets, regulators etc. with and including one run of 1100Volts grade, 1.5 sqmm PVC insulated unsheathed multistranded FRLS grade copperconductor cable as earth continuity wireconnected to metallic bodies of luminaries/ Fans etc at one end and connecting to common earth dolly at other end and carrying out IR test for each circuit including making good the disturbed surface with cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. |
| 5 | Material and labour for point wiring for 5Amp socket point controlled by one switch on same board complete with 1100Volts grade conforming to IS-694 1.5 Sqmm (nominal area) PVC insulated, unsheathed, multistranded FRLS, copper conductor cable including circuit wire(Make: Havells/ Plaza/ Finolex/ Polycab)/ drawn through and including heavy grade rigid non metallic PVC conduit 20mm or higher dia (Make: Prestoplast/ Pressfit/ Finolex/ Precision) as required at site, totally concealed in walls/ floors/ ceiling/ roof including all conduit accessories/ fitting/ junction box/ inspection covers etc of heavy grade, ISI marked and sunken type pressed steel/ welded mild steel terminal box (ISI marked) factory made out of 16 gauge, MS sheet with holdfast totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/ cup washers, for mounting switches, sockets, regulators etc. with and including one run of 1100Volts grade, 1.5 sqmm PVC insulated unsheathed multistranded FRLS grade copperconductor cable as earth continuity wire and connecting to common earthdolly and carrying out IR test for each circuit including making good the disturbed surface with cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. |
| 6 | Material and labour for point wiring for 5Amp independent socket point controlled by one switch complete with 1100Volts grade confirming to IS-694 1.5 Sqmm (nominal area) PVC insulated, unsheathed, multistranded, FRLS copper conductor cable including circuit wire(Make: Havells/ Plaza/ Finolex/ Polycab) drawn through and including heavy grade rigid non metallic PVC conduit 20mm or higher dia (Make: Prestoplast/ Pressfit/ Finolex/ Precision) as required at site, totally concealed in walls/ floors/ ceiling/ roof including all conduit accessories/ fitting/ junction box/ inspection covers etc of heavy grade, ISI marked and sunken, type pressed steel/ welded mild steel terminal box (ISI marked) factory made out of 16 gauge, MS sheet with hold fast totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/ cup washers, for mounting switches, sockets, regulators etc. with and including one run of 1100Volts grade, 1.5 sqmm PVC insulated unsheathed multistranded FRLS grade copperconductor cable as earth continuity wireand connecting to common earth dolly and carrying out IR test for each circuit including making good the disturbed surface with cement mortar 1:3 and matching/ finishing surfaces with distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. |
| 7 | Material and labour for point wiring for 15Amp independent socket point controlled by one switch complete with 1100Volts grade conforming to IS-694 2.5 Sqmm (nominal area) PVC insulated, unsheathed, multistranded, FRLS copper conductor cable including circuit wire (Make: Havells/ Plaza/ Finolex/ Polycab) drawn through and including heavy grade rigid non-metallic PVC conduit 20mm or higher dia (Make: Prestoplast/ Pressfit/ Finolex/ Precision) as required at site, totally concealed in walls/ floors/ ceiling/ roof including all conduit accessories/ fitting/ junction box/ inspection covers etc of heavy grade, ISI marked and sunken type pressed steel/ welded mild steel terminal box (ISI marked) factory made out of 16 gauge, MS sheet with hold fast totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/ cup washers, for mounting switches, sockets, regulators etc. with and including one run of 1100Volts grade, 2.5 sqmm PVC insulated unsheathed multistranded FRLS grade copperconductor cable as earth continuity wireand connecting to common earth dolly and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. |
| 8 | Material and labour for point wiring for one light point/ Fan point/ Bell point controlled by one way switch complete with 1100Volts grade 1.50 Sqmm (nominal area) PVC insulated, unsheathed, multistranded, FRLS copper conductor cable including circuit wire(Make: Havells/ Plaza/ Finolex/ Polycab) drawn through and including white/ ivory colour heavy grade PVC casing -n capping ISI marked of suitable size with all accessories/ fittings (Make: Prestoplast/ Pressfit/ Finolex/ Precision) and fixing on wall/ ceiling with and including and sunken type pressed steel/ welded mild steel terminal box (ISI marked) factory made out of 16 gauge, MS sheet with hold fast totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/ cup washers, for mounting switches, sockets, regulators etc. with and including one run of 1100Volts grade, 1.5 sqmm PVC insulated unsheathed multistranded FRLS grade copperconductor cable as earth continuity wireand connecting to common earth dolly and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces with distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. |
| 9 | Material and labour for point wiring for 5Amp socket point controlled by one switch on same board complete with 1100Volts grade 1.5 Sqmm (nominal area) PVC insulated unsheathed multistranded, FRLS copper conductor cable including circuit wire (Make: Havells/ Plaza/ Finolex/ Polycab) drawn through white/ ivory colour heavy duty PVC casing and capping ISI marked of suitable size with all accessories/ fittings (Make: Prestoplast/ Pressfit/ Finolex/ Precision) and fixing on wall/ ceiling with and including and sunken type pressed steel/ welded mild steel terminal box (ISI marked) factory made out of 16 gauge, MS sheet with hold fast totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/ cup washers, for mounting switches, sockets, regulators etc. with and including one run of 1100Volts grade, 1.5 sqmm PVC insulated unsheathed multistranded FRLS grade copperconductor cable as earth continuity wireand connecting to common earth dolly and carrying out IR test for each circuit including making good the disturbed surface with cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. |
| 10 | Material and labour for point wiring for 5Amp independent socket point controlled by one switch complete with 1100Volts grade 1.5 Sqmm (nominal area) PVC insulated, unsheathed, multistranded, FRLS copper conductor cable including circuit wire (Make: Havells/ Plaza/ Finolex/ Polycab) drawn through and including white/ ivory colour heavy duty PVC casing and capping ISI marked of suitable size with all accessories/ fittings (Make: Prestoplast/ Pressfit/ Finolex/ Precision) and fixing on wall/ ceiling with and including and sunken type pressed steel/ welded mild steel terminal box (ISI marked) factory made out of 16 gauge, MS sheet with hold fast totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/ cup washers, for mounting switches, sockets, regulators etc. with and including one run of 1100Volts grade, 1.5 sqmm PVC insulated unsheathed multistranded FRLS grade copperconductor cable as earth continuity wireand connecting to common earth dolly and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces with distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. |
| 11 | Material and labour for point wiring for 15Amp independent socket point controlled by one switch complete with 1100Volts grade 2.5 Sqmm (nominal area) PVC insulated unsheathed multistranded FRLS copper conductor cable including circuit wire (Make: Havells/ Plaza/ Finolex/ Polycab) drawn through white/ ivory colour heavy duty PVC casing and capping ISI marked of suitable size with all accessories/ fittings (Make: Prestoplast/ Pressfit/ Finolex/ Precision) and fixing on wall/ ceiling with and including and sunken type pressed steel/ welded mild steel terminal box (ISI marked) factory made out of 16 gauge, MS sheet with hold fast totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/ cup washers, for mounting switches, sockets, regulators etc. with and including one run of 1100Volts grade, 2.5 sqmm PVC insulated unsheathed multistranded FRLS grade copperconductor cable as earth continuity wireand connecting to common earth dolly and carrying out IR test for each circuit including making good the disturbed surface with cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. |
| 12 | Supply and fix switch piano flush type, single pole, one way, 5Amps, 240 Volts, white finish complete all as specified and directed. Make: Anchor(Deluxe)/ Leader/ Bajaj/ Havells |
| 13 | Supply and fix socket outlet, 5 pin, 5Amps, single pole one way flush type, white finish complete all as specified and directed. Make: Anchor(Deluxe)/ Leader/ Bajaj/ Havells |
| 14 | Supply and fix switch socket combination outlet, 5 in 1, 3 pin, 5/15Amps, flush type single pole, one way universal, 240 Volt, white finish complete all as specified and directed.Make: Anchor (Deluxe) / Leader / Bajaj/ Havells. |
| 15 | Supply and fix ceiling rose, surface bakelite of size 65mm x 20mm three terminals complete all as specified and directed.Make: Anchor(Deluxe)/ Leader/ Bajaj/L&T |
| 16 | Supply and fix lamp holder PVC/ poly carbonate type with back plate suitable for angle/ batten fitting complete all as specified and directed. Make :- Anchor/ Leader/ Bajaj |
| 17 | Supply and fixing Regulator step type 300 Watt 240 Volt for Ceiling Fan all as specified and directed.Make: Anchore/ Leader/ Bajaj |
| 18 | Material & Labour submain wiring with two runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 4 sqmm (Make: Havells/ Plaza/ Finolex/ Polycab) drawn through and including heavy grade PVC casing -n- caping (Make: Prestoplast/ Pressfit/ Finolex/ Precision) of suitable size, fixed to walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all accessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 4 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified and as directedNote: (a) Two runs of 4 Sqmm single core copper cables and One run of earth conductor cable of 4Sqmm with casing capping will be measured and paid as one unit length. |
| 19 | Material & Labour submain wiring with two runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 6 sqmm (Make: Havells/ Plaza/ Finolex/ Polycab) drawn through and including heavy grade PVC casing -n- caping (Make: Prestoplast/ Pressfit/ Finolex/ Precision) of suitable size, fixed to walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all accessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 6 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified and as directedNote: (a) Two runs of 6 Sqmm single core copper cables and One run of earth conductor cable of 4Sqmm with casing capping will be measured and paid as one unit length. |
| 20 | Material & Labour submain wiring with four runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 10 sqmm (Make: Havells/ Plaza/ Finolex/ Polycab) drawn through and including heavy grade PVC casing caping (Make: Prestoplast/ Pressfit/ Finolex/ Precision) of suitable size, fixed to walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all conduit acessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 10 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified.Note: (a) Four runs of 10 Sqmm single core copper cables and One run of earth conductor cable of 10 Sqmm with casing capping/conduit will be measured and paid as one unit length. |
| 21 | Supply and fix MCB DB Vertical load line vertical DB 4 way TPN 415 volts 3 phase with suitable bus bar ratingand including MCCB of 100 Amps as incomer all prewired with neutral and earth links flushed to wall and testing including taking down old unserviceable MCB DB vertical type including all fixing accessories in any position and location carefully after disconnection of all electrical connections and stacking at site for issue of Sch of Credit and making good the disturbed surfaces complete all as specified and directed.Make : Havells/ Schneider/ L&T |
| 22 | Supply and fix MCB DB Vertical load line vertical DB 4 way TPN 415 volts 3 phase with suitable bus bar ratingand including MCCB of 160 Amps as incommer all prewired with neutral and earth links flushed to wall and testing including Taking down old unserviceable MCB DB vertical type including all fixing accessories in any position and location carefully after disconnection of all electrical connections and stacking at site for issue of Sch of Credit and making good the disturbed surfaces complete all as specified and directed.Make : Havells/ Schneider/ L&T |
| 23 | Supply and fix double door metallic sheet metal enclosure (TPN) for DB when MCBs to be used SPN 4 ways, 240 Volts with 200Amps rated bus bar complete fixed properly on/ in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified anddirected. Make: Havell’s/ Schneider/ L&T |
| 24 | Supply and fix IP-42 protection distribution board, SPN 8 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Ampsrated bus bar, neutral link each bar and din rail complete all as specified and directed.Make : Havells/ Schneider/ L&T |
| 25 | Supply and Fix Sheet metal enclosure,( DB’S) double door made out of CRCA Sheet, 240 Volts single pole and neutral with 200 Amps rated bus bar 4 way complete all as specified and directed.Make : Havells/ Schneider/ L&T |
| 26 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of Single poles & Neutral (SPN) and current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. Make : Havells/ Schneider/ L&T |
| 27 | Supply and fixing 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.Make : Havells/ Schneider/ L&T |
| 28 | Supply and fixing 415V 10KA \"C\" curve miniature circuit breaker (MCB) of four poles and current carrying capacity TPN 63 Amps in the DB complete with connection testing and commissioning complete all as specified and as directed.Make : Havells/ Schneider/ L&T |
| 29 | Fixing only LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Note: LED fittings shall be issued under Sch \"B\" as free for fixing only. |
| 30 | Fixing only LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.Note: LED fittings shall be issued under Sch \"B\" as free for fixing only. |
| 31 | Fixing only LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Note: LED fittings shall be issued under Sch \"B\" as free for fixing only. |
| 32 | Material and labour for earthingcomplete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25metre deep below natural ground level) with top edge of the plate not less than 1.5metre below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to main switch board/ main DB’s/ earth test point with and including necessary excavation and earth work in any type of strata, PCC 1:3:6, type C1 in chamber wall with 50mm thick, RCC cover 1:2:4, type B0 duly reinforced with 6 mm diabar, @100mm both way with suitable lifting handle, charcoal dust and common salt mixed and packed in 150mm thick layer all around the earth plate, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh, GI protection pipe 15mm dia light grade up to 7.5m from electrode and engraving of earth marking on nearby structure/ building with cement motor 1:4 plate of size 200mm x 150mm x 15mm thick and writing of earth results with paint complete all as shown in electrical plate No. 3 of SSR Part-I complete all as specified and as directed. Note: - On testing if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
| 33 | Taking down exhaust fans of any size, cleaning, oiling and greasing throughly and repairing the same if required and spray painting the same with super enamelled paint (existing color) and refixing at the existing site/rooms and connected with new 23/0.0076 three core PVC flexible cable from ceiling rose to fan etc complete all as specified and as directed. |
| 34 | Taking down the unserviceable exhaust fan from site of any capacity from 300 mm to 450 mm andremoving of burnt winding from exhaust fanand rewinding the same with equal gauge of super enameled copper winding wire as per existing, providing insulating paper, varnishing and testing on completion, including transportation of fan to contractor\"s work shop and bringing back to site and fix with suitable size of flexible wireetc. complete all as specified and directed. |
| 35 | Taking down ceiling fan of any size and in any location cleaning, oiling and greasing throughly and repairing the same if required and spray painting the same with super enamelled paint (existing color) and refixing at the existing site/rooms and connected with new 23/0.0076 three core PVC flexible cable from ceiling rose to fan etc complete. Note: Bearingswill be measured and paid separately. |
| 36 | Taking down the unserviceable ceiling fans of 1200/1400 mm sweep andremoving of burnt winding from ceiling fanand rewinding the same with equal gauge of super enameled copper winding wire as per existing, providing insulating paper, varnishing and testing on completion, including transportation of fan to contractor\"s work shop and bringing back to site and fix with suitable size of flexible wireetc. Complete all as directed. |
| 37 | Supply and fix ball bearing of No 6201 Suitable to ceiling fans including removing the old one complete all as directed. Make: - SKF/ NBC. |
| 38 | Supply and fix ball bearing of No 6202 Suitable to ceiling fans including removing the old one complete all as directed. Make: - SKF/ NBC. |
| 39 | Supply and fix capacitor with PVC clamp of 2.5MFD capacity suitable to fans including removing the old one complete all as directed. Make:- Crompton Greaves/ Wipro/ Bajaj/ Philips |
| 40 | Supply and fix heating element push type 1.5 KW/ 2KW ISI Marked fixed in repairs including removing the old one complete all as specified and directed. |
| 41 | Supply and fix geyser thermostat of ISI marked, suitable for 20 degree to 80 degree centigrade in 25/ 50liter capacity geyser fixed in repairs including removing the old one complete all as specified and directed. Make:- Indofoss/ Annapurna |
| 42 | Supply and fix safety valve, vertical type made out of brass chromium plated, size 15mm, heavy duty fixed in repairs including removing the old one complete all as specified and directed. |
| 43 | Supply and fix non return valve, vertical type, made out of brass suitable for 15 mm GI pipe including cutting and threading of G.I. pipe and G.I. fittings such as socket, union, elbow, nipple, etc. fixed in repairs including removing the old one complete all as specified and directed. Make:- Sant/ Bir/ Varun/ Venus/ Kirloskar |
| 44 | Supply and fix PVC connection hot water grade 450mm long 15 mm dia with two Nos coupling nut of brass, heavy duty fixed in repairs including removing the old one complete all as specified and directed. |
| 45 | Supply and fix heavy duty water connection pipe (flexible steel) 450mm long and 15mm dia with two Nos coupling nut of brass, heavy duty fixed in repairs including removing the old one complete all as specified and directed. |
| 46 | Supply and fix PVC insulated three core wire copper conductor 1100volt grade of size 0.5Sqmm suitable to fan including removing the old one complete all as specified and directed.Make:- Anchor, Havells, Plaze, Polycab |
| 47 | Supply & Fix single pole and neutral encloser with two pin and earth plug and socket complete with one single pole MCB of 20 complete all as specified and as directed. Make:- Havells/ Schneider/ L&T |
| 48 | Supply & Fix PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and as directed. |
| 49 | Supply & Fix PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified and as directed. |
| 50 | Supply & Fix PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 150 mm and 50 mm deep complete all as specified and as directed. |
| 51 | Supply & Fix PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep complete all as specified and as directed. |
| 52 | Material & Labour for making provision in the round hole cutting in the wall, by means of rugged bolt nuts and washer etc for fixing of exhaust fan of size up to 450 mm sweep in any position and location where directed including finishing by plastering, painting etc complete all as specified and as directed. |
| 53 | Taking down old unserviceable storage type electric water heater/ geyser of any capacity up to 50 Ltrs in any position and location carefully after disconnection of all electrical connections, including cold and hot water connections etc complete and refixing the same in location where directed including by providing anchor bolts, replacement of unserviceable items like hot/ cold water pipes, fusible plug, NRV, PRV, stop cock/ gate valve, heating element, thermostart etc and painting the same after completion of all repair works by super enamelled paint (of same colour as existing) complete testing and commissioning all as specified and as directed.Note: - Unserviceable items shall be measured and paid separately under relevant items of this schedule. |
