Department Of Irrigation-DOI has published Lot-04 Potholes Relief ( Gaddhamukti ) And Renovation Works From Main Road Warrier 2 / 6 To Hydil Crossroads.. Submission Date for this Tender is 20-10-2021. Road Work Tenders in Kalagarh Uttarakhand. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Repair of Pot hole any depth including sweeping free from dust, mud or water cutting around edge to at least 25 mm depth, making good by filling including Laying & Consolidation of stone Ballast soiling 22.50mm to45 mm size in patch repair with Ballast in 15 cm loose thickness with8-10 ton road roller including opening out stacks, sorting in proper size, spreading the material, making rectangular shape patchwith all cost of labour, T&P, lead & Lifts complete as specified and directed by Engineer-In-charge. |
2 | Providing & applying Primer Coat with bitumen emulsion (SS-1)as per I.S. 8887 on prepared surface of granular base including cleaning of road surface and spreading primer at the rate of 0.85 Kg./Sqm. Using machanical means. Before Applying prime coat, the surface will be cleaned with Mechanical broom and water will also be sprinkled with water tanker to keep the surface Moist. The Prime coat will be applied 24 hrs before the application of bituminous course including all Taxes, Material, Labour, T&P etc required for proper completion of the work. As per MORD specification No. 502and as specified and directed by Engineer-In-charge. |
3 | Providing & applying Tack Coat with bitumen emulsion RS-1 using Emulsion distributor at the rate of 0.275 Kg./Sqm. on the prepared primed granular/old painted surface, cleaned with air compressor, including all Taxes, Material, Labour, T&P etc required for proper completion of the work, as per MORD specification No. 503and as specified and directed by Engineer-In-charge. |
4 | Providing, laying & rolling of open graded Premix Carpet of 20mm thickness composed of 13.2mm to 5.60mm aggregates including mixing in a H M P, laying with Paver Finisher & rolling with a three wheeled 80-100KN Static Roller capacity, finished to required level & gradesBitumen VG-10@ 14.6 Kg./ 10 sqm area for premixing including all Taxes, Material, Labour and T&P etc required for proper completion of the work, as per MORD specification No. 508 and as specified and directed by Engineer-In-charge. |
5 | Providing and laying seal coat type "B" sealing the voids in a bituminous surfsce P.C. surfacelaid to specified levels grade and cross fall using with coarse sand of Haridwarquarry @ 0.06 cum per 10 sqm with Bitumen VG-10 @ 6.80 kg/10sqm including heating of Bitumen to the required temperature and including all material , Labour & T&P etc. as perClause 510 case-III of MORD Specification and as specified and directed by Engineer-In-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail