Fixing Of Aluminium Partitions For Labs At Academic Block A8 2Nd Floor At South Campus Of Iit Mandi Fixing Of Aluminium Partitions For Labs At Academic Block A8 2Nd Floor At South Campus Of Iit Mandi

Tender Notice

29565669
Fixing Of Aluminium Partitions For Labs At Academic Block A8 2Nd Floor At South Campus Of Iit Mandi Fixing Of Aluminium Partitions For Labs At Academic Block A8 2Nd Floor At South Campus Of Iit Mandi
Indian
Himachal Pradesh
14-10-2021
21-10-2021
22-10-2021

Tender Details

Fixing Of Aluminium Partitions For Labs At Academic Block A8 2Nd Floor At South Campus Of Iit Mandi Fixing Of Aluminium Partitions For Labs At Academic Block A8 2Nd Floor At South Campus Of Iit Mandi

Key Value

Document Fees
INR 1180 /-
EMD
INR 4243.00 /-
Tender Value
INR 2.12 Lakhs /-

BOQ Items

Name of Work: “Fixing of Aluminium partitions for labs at Academic block A8 2nd floor at South campus of IIT Mandi.” Note:- 1. Quoted rate should be inclusive of all applicable taxes including GST (nothing extra shall be payable). 2. All Statutory deduction will be made as per prevailing rates
Sl. No. Item Description
1Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
2Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides including carriage of material in all leads and lifts.
3Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) including carriage of material in all leads and lifts.
4Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
5Fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) including carriage of material in all leads and lifts.
6Fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including carriage of material in all leads and lifts.
7Fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides including carriage of material in all leads and lifts.
8Providing and fixing aluminium tower bolt. ISI marked, power coated (coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 150 X 10 mm as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
9Providing and fixing dash fastener for frame work of required lengths as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
10Providing and fixing Roller set for aluminium door shutter as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
11Providing and fixing aluminium handles, ISI marked, power coated (coating not less than grade AC 10 as pern IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 200 mm as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail