Construction Of Canteen Block In Govt. Degree College Nadaun Bharmoti Distt. Hamirpur Sh C / O Building Portion Water Supply And Sanitary Installation Septic Tank And Site Development

Tender Notice

29564484
Construction Of Canteen Block In Govt. Degree College Nadaun Bharmoti Distt. Hamirpur Sh C / O Building Portion Water Supply And Sanitary Installation Septic Tank And Site Development
Indian
Himachal Pradesh
14-10-2021
21-10-2021
21-10-2021

Tender Details

Construction Of Canteen Block In Govt. Degree College Nadaun Bharmoti Distt. Hamirpur Sh C / O Building Portion Water Supply And Sanitary Installation Septic Tank And Site Development

Key Value

Document Fees
INR 2000 /-
EMD
INR 105500.00 /-
Tender Value
INR 72.94 Lakhs /-

BOQ Items

Name of Work: Construction of Canteen Block in Govt. Degree College Nadaun at Bharmoti Distt. Hamirpur (H.P ) (SH:- C/o Building Portion, Water Supply and Sanitary Installation,Septic tank and site development).
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm(thirty centimetre)) in depth, 1.5 m(one point five metre) in width as well as 10 sqm(ten square metre) on plan) including getting out and disposal of excavated earth with in all leads and lifts all kinds of soil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
2Excavation workby mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m (One point five metre) in width or 10 sqm (Ten square metre) on plan), including dressing of sides and ramming of bottoms including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts in ordinary rock and all kinds of soil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
3Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
4Centering and shuttering including strutting, propping etc. and removal of form work for including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
5Foundations, footings, bases for columns
6Suspended floors, roofs, landings, balconies and access plat form
7Columns, piers, abutments, pillars, posts and struts
8Lintels, beams, plinth beams, girders, bressumers and cantilevers
9Walls (any thickness) including attached pilasters, butteresses, plinth and string courses et
10Edges of slab and break in floors and walls under 20cm wide
11Stairs, (excluding landings) except spiralstaircases
12Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering1:5:10 (one cement : five coarse sand : ten graded stone aggregate) 40mm ( forty millimetre)nominal size graded stone aggregate upto plinth level in foundation and flooring including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
13Providing and laying mechanically mixed and vibrated cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate) 40mm ( forty millimetre)nominal size graded stone aggregatein retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
14Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre)nominal size graded stone aggregate upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
15Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering1:3:6 (one cement : three coarse sand : six graded stone aggregate) 40mm ( forty millimetre)nominal size graded stone aggregate upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
16Providing and laying in position ccement concrete ofM-20(M Twenty ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) grade excluding the cost of centering and shuttering upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
17Providing and laying damp-proof course 40mm ( forty millimetre) thick with cement concrete 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 12.5mm ( twelve point five nominal size including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
18Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg ( one point seven kilogram )per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oilincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
19Providing and laying design mix reinforced cement concrete ofM-20 ( M-twenty)grade, stone aggregate 20 mm (twenty millimetre) nominal size) in Foundation & footings bases of columns and the like and mass concrete excluding the cost of centering, shuttering, finishing and reinforcement upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
20Providing and laying design mix reinforced cement concrete of M-20 ( M-twenty) grade, stone aggregate 20 mm (twenty millimetre) nominal size) in beams, suspended floors, roofs having slope up to 15° ( fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with graded stone aggregate 20 mm (twenty millimetre) nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
21Providing and laying design mix reinforced cement concrete of M-20 ( M-twenty) grade, stone aggregate 20 mm (twenty millimetre) nominal sizein walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
22Smooth finishing of the exposed surface of R.C.C. work with 6 mm(six millimetre) thick cement mortar 1:3 (one Cement : three fine sand).including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
23Steel reinforcement (TATA /SAIL / JINDAL PANTHER/RINL)for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete work including cost of binding wire upto floor five level Thermo-Mechanically Treated bars of grade Fe-500D or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
24Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five)in foundation and plinth in Cement mortar 1:6 (one cement :six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
25Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
26Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to allfloorlevel in cement mortar 1:4 ( one sand : four coarse sand)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
27Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in foundationsand plinth in : in cement mortar 1:4 (One cement : four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
28Supplying, stacking and placing in position of hard stone 22.5cm(twenty two point five centimetre) thickat site including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
29Providing and fixing cup board shutters 25 mm ( twenty five millimetre)thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board (HDHMR) IS: 12823 marked of Action tesa/Century Ply/Green ply/Kit ply make of exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm ( twenty five millimetre) wide x12 mm ( twelve millimetre)thick with necessary screws and bright finished stainless steel piano hinges, complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
30Providing and fixing 18mm (Eighty millimetre)Pre-laminated flat pressed three layer (HD HMR) particle board or graded wood particle board IS : 3087 with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked of Action tesa/Green ply/Kit ply/Century Ply makein shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
31Providing and fixing plywood 12 mm (twelve millimetre) thick (Green Ply/Kit Ply/ Century Ply make) one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufactureincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
32Providing and fixing 1.00mm ( one millimetre) thick coloured or plain lamination sheetofGreenlam/ century ply / kit ply makeon boards/ply wood sheets with approved adhesive and nails etc completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
33Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm(eighteen into five millimetre) fixed with wooden adhesive ofapproved quality and screws/nails on the edges of the Pre-laminated particle boardcompleteincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
34Providing and fixing powder coated coloured aluminium of Jindal/ Hindalco /Balco for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately)complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
35For fixed Portion Polyestercoloured powder coated aluminium (minimum thickness of polyester powdercoating 50 micron)(fifty micron).
36For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Polyester Colouredpowder coated aluminium(minimum thickness of polyester powder coating 50 micron) (fifty micron).
37Providing and fixingcoloured /plain glazing with float glass panes of 5 mm (fine millimetre)thickness (weight not less than 12.50(twelve point fifty) kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
38Providing and fixing double action hydraulic floor spring of approved brand and manufacture (UNIVERSAL/DORMA) conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125(one hundred twenty five) kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum1.25 mm thickness completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
39Providing & fixing fly proofStainless steel (grade 304(three hundred four)) wire gauze of 0.5 mm(zero point five millimetre) dia wire and 1.4 mm (one point four millimetre) aperture on both sides completeto windows, clerestory windows & doors with aluminium snap beadingand nuts & bolts complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
40Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm (two hundred millimetre)centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment).completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
41Providing and fixing 12 mm(twelve millimetre) thick HD HMR Pre-laminated particle board or graded wood particle board with decorative lamination on both sides, flat pressed three layer conforming to IS: 12823 Grade l Type ll, in panelling of Action tesa/Green ply/Kit ply /Century Ply make fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
42Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm (eight millimetre) dia and 75 mm (seventy five millimetre)long bolt including providing aluminium washers 2 mm(two millimwte0re) thick & 15 mm(fifteen millimetre) dia , at a staggered pitch of 200mm(two hundred millimetre) centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-chargePowder coated aluminium sheet 2.5mm (two point five millimetre) thick (minimum thickness of powder coating 50 (fifty )micron) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
43Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
44300x16mm (Three hundred into sixteen millimetre) nominal size.
45250x16mm (Two hundred fifty into sixteen millimetre) nominal size.
46Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetracomplete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
47200x10mm (Two hundred into ten millimetre) nominal size.
48150x10mm (One hundred fifty into ten millimetre) nominal size
49100x10mm (One hundredinto ten millimetre) nominal size
50Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
51125mm (One hundred twenty five millimetre)
52100mm (one hundred millimetre)
5375mm (Seventy five millimetre)
54Providing and fixing 40 mm ( fortymillimetre)special quality bright finished brass cupboard or ward robe locks (Link/Godrej)with four levers of approved quality including necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
55Providing and fixing 150 mm ( one hundred fifty ) bright finished floor brass door stopper with rubber cushion, necessary brass screws etcetra to suit shutter thickness completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
56Providing and fixing 150mm(one hundred fifty millimetre) bright finished brass hard drawn hooks and eyes completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
57Providing and fixing 25mm ( twenty five) diachromium plated brass curtain rod having wall thickness of 1.25mm ( one point two five millimetre)with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etcetra wherever necessary complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
58Providing and fixing Triple strip vertical type magnetic catcher of approved quality (Hettich/Godrej) in cupboard / ward robe shutters, including fixing with necessary screws etcetra completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
59Kota stone 25mm ( twenty five millimetre)thick slab flooring over 20 mm ( twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) upto all floor levelincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
60Kota stone slabs 20 mm ( twenty millimetre) thickin risers of steps, skirting, dado and pillars laid on 12 mm ( twelve millimetre) (average) thick cement mortar 1:3 ( one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete upto all floor levelincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
61Extra for Kota stone/sand stone in treads of steps and risers using single length upto 1.80 metre (One point eight zero metre)completeupto all floor levelin all heightsincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
62Providing and laying Polished Granite stone slab ofJet Black/Cherry Red/Elite Brown/Cat Eye colour flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetra all complete as specified and as directed by the Engineer-in-Charge.Polished upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
63Extra for pre finished nosing to treads of steps of marble/granite stone completeupto all floor levelin all heightsincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
64Extra for pre finished nosing in treads of steps of Kota stone/sand stone slab completeupto all floor levelin all heightsincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
65Providing and laying600x600 mm ( six hundred into six hundred millimetre) full body charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero point zero eight percent)and conforming to IS: 15622, of Orient bell/ Kazaria/ AGL/ RAK /Johnson & Johnson approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(Three point three kilogramme per square metre) including filling / grouting and finishing completein pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
66Providing and laying300x300 mmand 9.8mm thick( three hundred into three hundred millimetre and nine point eight millimetre thick)vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero point zero eight percent)and conforming to IS: 15622, of Orient bell/ Kazaria/ AGL/ RAK /Johnson & Johnson approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etcetra complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
67Providing and laying 600x600 mm ( six hundred into six hundred millimetre) full body charged Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% ( zero point zero eight percent) and conforming to I.S. 15622, ofOrient bell/ Kazaria/ AGL/ RAK /Johnson & Johnsonapproved make , in all colours and shade, in skirting, riser of steps, over 12 mm ( twelve millimetre) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point htree kilogram per square metre) including grouting the joint with white cement & matching pigments etcetra complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
68Providing and fixing 1st quality HD series Digital Glazed rectified ceramic tiles (300mmx600 mm size) ( Three hundred into six hundred millimetre)conforming to IS : 15622 (thickness to be specified by the manufacturer ) of Orient bell/ Kazaria/ RAK, approved make , in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm ( twelve millimetre )thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm ( three point htree kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
69Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing etcetra complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
70Size 500x500 mm(fivehundred into five hundred millimetre) or below
71Size 600x600 mm(sixhundred into six hundred millimetre)
72Providing and laying factory madePre Polished chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge 60mm(sixty millimetre) thick cement concrete paver block of M-40 grade with approved colour, design & pattern of NTC/ MODERN TILES (Delhi) / SUPERTILES/NITCO/GICO make complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
73Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm ( twenty into ten into two millimetre) and braced with flat iron diagonals 20x5 mm ( twenty into five millimetre) size, with top and bottom rail of T-iron 40x40x6 mm, ( forty into forty into six millimetre)with 40 mm ( forty millimetre) dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
74Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of TATA/SAIL/JSW Make 0.50 mm ( zero point five zero millimetre)+ 0.05 % ( zero point zero five percentage)total coated thickness with zinc coating 120 ( one hundred twenty)grams per square metre as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns. Sheet should have protective guard film of 25 ( twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 ( twelve) metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size 5.5x 55 mm ( five point into fifty five millimetre)with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever requiredincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
75Providing and fixing Ridges plain 500 - 600mm ( five hundred to six hundred millimetre)precoated galvanised steel sheet roofing accessories of TATA/SAIL/JSW Make0.50 mm ( zero point five zero millimetre)+ 0.05 % ( zero point zero five percentage)total coated thickness, Zinc coating 120 ( one hundred twenty) grams per square as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven)microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
76Providing and fixing Crimpt curvesprecoated galvanised steel sheet roofing accessoriesof TATA/SAIL/JSW Make0.50 mm ( zero point five zero millimetre)+ 0.05 % ( zero point zero five percentage)total coated thickness, Zinc coating 120 ( one hundred twenty) grams per square as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven)microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
77Providing and fixing Flashings/ Aprons Upto 600 mm ( six hundred millimetre) precoated galvanised steel sheet roofing accessoriesof TATA/SAIL/JSW Make0.50 mm ( zero point five zero millimetre)+ 0.05 % ( zero point zero five percentage) total coated thickness, Zinc coating 120 ( one hundred twenty ) grams per sqm as per IS: 277, in 240 (two hundred forty ) mpa steel grade, 5-7 ( five to seven ) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
78Providing and fixing MS BP sheet make of TATA/SAIL/JSW/JINDAL PANTHER 1.66mm to 2mm (One point six six millimetre to two millimetre) thick in eaves board/ facia/soffits/ceiling including fixing cutting and welding to steel roof members (Base member of steel work) and applying a coat of red lead primer complete as per Engineer in Charge (Basement of steel) work should shall be measured and paid separately completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
79Providing and fixing plain 6 mm (six millimetre) thick Cement bonded wood particle board ( Bison Board)as per IS:14276 multipurpose cement board (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
80Structural steel work (TATA/SAIL/Apollo/JSW Make ) riveted, bolted or welded in built up sections, trusses, purlins, rafters and other like framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete in building including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
81Steel work welded in built up sections(TATA/SAIL/Apollo/JSW Make ) framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
82Providing and fixing mild steeltube (TATA/SAIL/Apollo/JSW Make ) hand rail of approved size by welding etcetra to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primerincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
83Providing and fixing mild steel (TATA/SAIL/Jindal Panther ) round holding down bolts with nuts and washer plates completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
84Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm(at the rate of zero point eight zero per ten square metre)(ASAIN/NEROLAC/ICI-DULUX )of approved brand and manufactureincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
85Applying priming coat With ready mixed pink or Grey primer(ASAIN/NEROLAC/ICI-DULUX )of approved brand and manufacture on wood work (hard and soft wood) Ready mixed paint brushing with whitelead for priming including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
86Painting wood work with Deluxe Multi Surface Paint of required shade withTwo or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (at the rate of zero point seven five per ten square metre)(ASAIN/NEROLAC/ICI-DULUX ) of approved brand and manufactureincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
876 mm ( six millimetre ) plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved makeupto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
8815 mm ( fifteen millimetre)cement plaster on fairside of single or half brick wall of mix 1:6 ( one cement : six coarse sand)upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
8920 mm (twenty millimetre) cement plaster of mix1:6 ( one cement : six coarse sand) on rough side brick wallupto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
90Providing and applying white cement based (Birla White/ J.K ) putty of average thickness 1 mm ( one millimetre)of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
91Finishing walls with 100%(Hundred percent) Premium acrylic emulsion paint having VOC less than 50(fifty) gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of ASAIN/NEROLAC/ICI-DULUX of required shade (Company Depot Tinted) with silicon additives on new work (Two or more coats applied @1.43 litre/ 10 sqm(One point forty three litre per ten square metre). Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm(zero point nintylitre per ten square metre)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
92Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two or more coats) over and including water thinnable priming coat with cement primer of ASAIN/NEROLAC/ICI-DULUXincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
93Finishing walls with Acrylic Smooth exterior paint of ASIAN- APEX ULTIMA /NEROLAC- Wheather Shield of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm ( at the rate of one point six seven litre per ten square metre)over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm ( at the rate two point two zero kilogram per ten square metre) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
94Making plinth protection 50mm ( fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm ( twenty millimetre)nominal size) over 75mm( seventy five millimetre)thick bed of dry brick ballast 40 mm ( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
95WATER SUPPLY AND SANITARY INSTALLATION
96Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm ( one hundred millimetre)sand cast Iron P or S trap, 10( ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C.pan of size 580x440 mm ( five hundred eighty into four hundred forty) with integral type foot rests Hindware /Cera(Universal Pan No. 2071) ( two thousand seventy one)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
97Providing and fixing white vitreous china pedestal type water closet (European type) of size 385 x 675 x 780 mm (Three hundred eighty five into six hundred seventy five into seven hundred eighty millimetre) with white solid plastic soft closing seat and lid of Jaquar (ECS-WHT-7751SS+ECS-WHT-201) /Hindware Snow White Shade ,10 (ten )litre low level white vitreous china flushing cistern and C.P. flush bend with fittingsand C.I. brackets, 40 mm ( forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requiredincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
98Providing and fixing White Vitreous China wash basin ( CNS-WHT-705 )ofSize (mm) 200 x 595 x 420 (Two hundred into five hundred ninety five into four hundred twenty millimetre) with C.I. brackets, 15 mm (Fifteen millimetre) CP Brass single hole basin mixer of Jaquar (CON-CHR-167B) / Hindware 32mm (thirty two millimetre)C.P. brass waste of standard pattern , including painting of fittings and brackets, cutting and making good the walls wherever required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
99Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of Hindware/ Jaquar / Cera make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
100Providing and fixing P.V.C. waste semi rigidpipe for sink or wash basin including P.V.C. wastefittings complete 32mm ( thirty two millimetre)dia of Supreme /Fenolaxmakeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
101Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre)beveled edge mirror of superior glass (of approved quality) complete with 6 mm ( six millimetre)thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of ( Modigaurd/ Atul/Cera make)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
102Providing and fixing C.P Brass towel rail (ESSCO - AEC-1111) complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (six hundred millimetre)long towel rail with total length of 645 mm (six hundred forty five millimetre)width 78 mm ( seventy eight millimetre) and effective height of 88 mm (eighty eight millimetre)heavy duty of Hindware/ Cera/ Jaquar make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
103Providing and fixing 600 x 120 x 5mm ( six hundred into one hundred twenty into five millimetre)glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( forty millimetre)long screws, rawl plugs etcetra, complete of Hindware /Jaquar / Cera make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
104Providing and fixing CP soap Dish Holder ofJaquar (ACN-1171N)/Hindware Make with concealed fitting arrangements, weighing not less than 106 gms. (one hundred six six gram) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
105Providing and fixing 15mm ( fifteen millimetre)dia C.P. brass bibcock ofJaquar ( CON-047KN) /HindwareMake with wall flange of approved quality conforming to IS standards and weighting not less than 810 gms. (eight hundred ten gram) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
106Providing and fixing 15mm ( fifteen millimetre)dia C.P. brass long nose bib cock ofJaquar (CON-CHR-107KN)/Hindware Make with wall flange of approved quality conforming to IS standards and weighing not less than 810 gms. (eight hundred ten gram) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
107Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass stop cock ofJaquar ( CON-CHR-059KN)/Hindware Make for basin mixer and geyser points of approved quality conforming to IS:8931including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
108Providing and fixing uplasticised PVC connection pipe with brass unions 45cm (forty five centimetre) length 15mm (fifteen millimetre) nominal bore Cera/Jaquar/ Finolex / Hindware /Supreme Makeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
109Providing and fixing 20mm (twenty millimetre) sizegun metal gate valve withC I wheelof approved quality (screwed end) Jindal /Tata/Zoloto make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
110Providing and fixing 25mm (twenty fivemillimetre) size gun metal gate valve withC I wheelof approved quality (screwed end) Jindal /Tata/ Zoloto make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
111Providing and fixing 15mm (fifteen millimetre) size ball valve (brass) of approved quality, High or low pressure, with plastic floats complete of Heavy dutyincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
112Providing and fixing 15mm (fifteen millimetre) nominal bore furrule heavy duty including boring and taping the main of Tata/Jindal makeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
113Making connection of galvanised steel distribution branch with galvanised mild steel main 25mm (twenty five millimetre)to 40 mm ( forty millimetre)nominal bore by providing and fixing tee including cutting and threading the pipes completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
114Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 90x80 cm (ninety into eighty centimetre)and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram)and weight of frame 15 kg ( fifteen kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
115Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 120x90 cm (one hundred twenty into ninety centimetre)and 90 cm (ninety centimetre)deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetre) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram)(weight of cover 58 kg (fifty eight kilogram)and weight of frame 58 kg (fifty eight kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
116Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (four point five kilogram) and frame to be not less than 2.70 kg (two point seven zero)as perstandard design square mouth trap 100 x100mm (one hundred into one hundred millimetre) ( size P-typeWith common burnt clay F.P.S. (nonmodular) bricks of class designation 7 (seven) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
117Providing and fixing 15mm (fifteen millimetre) nominal sizeG.I. Pipes of Jindal( Hisar) /Tata make complete with G.I. fittings and clamps, including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
118Providing and fixing 20mm (twenty millimetre) nominal sizeG.I. Pipes of Jindal( Hisar) /Tata make complete with G.I. fittings and clamps, including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
119Providing and fixing Polyethelene-AluminiumPolyethelene (PE-AL- PE) Composite Pressure Pipes conforming to IS -15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetra 1216 (16mm O D pipe) (sixteen millimetre)nominal size of Kitic make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
120Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm (five hundred eighty into three hundred eighty into three hundred fifty millimetre) of Jaquar/Hindware/Cera make withAuto Closing UrinalValve of Jaquar (PRS-077) with fittings standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Range of two half stall urinals with 5 (Five) litre P.V.C. automatic flushing cistern of Hindware or Cera make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
121Providing and fixing C.PBrass toilet paper holder of ESSCO ( AEC-ESS-1151N)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
122Providing and placing on terrace (at all floor levels) polyethylene water storage tank of Sintex make with Tripple Layers with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tankincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
123Providing and fixing 510x1040mm (fivehundred ten into ten thousandforty millimetre) bowl depth 250mm (Two hundred fiftymillimetre) Stainless Steel AISI 304 (8/18) kitchen sink with drainboardof Diamond ( REK 4520 )/Hindware 304 Grade Steel (Glossy Finish), as per IS:13983 with C.I. brackets and stainless steel plug 40mm (Forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
124Providing and fixing 8mm dia C.P/SS jet with flexible tube upto 1 meter (one metre) long with SS triangular plate (Jaquar/Cera/Hindware) to Eurepean type WC of quality and make as approvedby as per direction of Engineer in Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
125Providing and fixing Single socketed pipes 90mm (Ninety millimetre)dia of Supreme/Fenolax/D-plast/ vectus make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre)gap for thermal expansionincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
126Providing and fixing Single socketed pipes 110mm ( one hundred ten millimetre)dia of Supreme/Fenolax/D-plast/ vectus make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre)gap for thermal expansionincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
127Providing and fixing 110 mm (One hundred ten millimetre) inlet and 90mm (Ninety millimetre) outlet floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors of Supreme/Fenolax/D-plast/ vectus make of 6kg/cm2 (Six kilogramme per centimetre square) pressureincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
128Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes (Supreme/Fenolax/D-plast/ vectus make) of 6kg/cm2 (Six kilogramme per centimetre square) pressureconforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion Single tee with door 75x75x75 mm (Seventy five into seventy five into seventy five millimetre) completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
129Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes (Supreme/Fenolax/D-plast/ vectus make) of 6kg/cm2 (Six kilogramme per centimetre square) pressureconforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion Single tee with door 110x110x110 mm (One hundred ten into one hundred ten into one hundred ten millimetre) completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
130Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes (Supreme/Fenolax/D-plast/ vectus make) of 6kg/cm2 (Six kilogramme per centimetre square) pressureconforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion Single tee without door 75x75x75 mm (Seventy five into seventy five into seventy five millimetre) completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
131Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes (Supreme/Fenolax/D-plast/ vectus make) of 6kg/cm2 (Six kilogramme per centimetre square) pressure conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion Single tee without door 110x110x110 mm (One hundred ten into one hundred ten into one hundred ten millimetre) completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
132Providing and fixing 90mm (Ninety millimetre) bend 87.5° (Eighty seven point five degree) on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes (Supreme/Fenolax/D-plast/ vectus make) of 6kg/cm2 (Six kilogramme per centimetre square) pressureconforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
133Providing and fixing 110 mm (One hundred ten millimetre) bend 87.5° (Eighty seven point five degree) on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes (Supreme/Fenolax/D-plast/ vectus make)of 6kg/cm2 (Six kilogramme per centimetre square) pressureconforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
134Providing and fixing 90mm (Ninety millimetre)dia of D-plast or vectus make unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm ( fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
135Providing and fixing 110mm ( one hundred ten millimetre)dia of D-plast or vectus make unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm ( fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
136Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, ( one point five metre) including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed within all leads for Pipes, cables etc. exceeding 80 mm (eighty millimetre)diameterbut not exceeding 300 mm (three hundred millimetre) diameter including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
137Providing and laying 100mm (one hundred millimetre) dia cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) up to haunches of S.W. pipes including bed concrete as per standard design including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
138Supplying and fixing cast iron cover without frame for manhole 455x610mm(Four hundred fifty five into six hundred ten millimetres) rectangular C.I. cover (Light duty single seal pattern-I) the weight of cover to be not less than 23kgs(Twenty three kilogramme)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge andincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
139Providingfixing M.S. foot restsin manholes with 20x20x10 cm (twenty into twenty into ten centimetre) cement concrete blocks of 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm (twenty millimetre) nominal size) as per standard design with 20x20 mm(twenty into twenty millimetre) square bar including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail