|
| 1 | Dismantling of plain or corrugated steel sheeting any gauge/thickness in roof or wall covering complete all as directed. |
| 2 | Supply and fix pre painted galvalume aluminum and zinc alloy coating with steel based corrugated steel sheet 0.50 mm thick of approved colour approved by GE having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour as approved by GE having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 4 | S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with \"L\" type or \"J\" type or cranked hook bolts and washers, in roof covering, wall cladding etc, with grade of zinc coating 275 complete all as specified and as directed. |
| 5 | Refixing only galvanised corrugated mildsteel sheeting as obtained from dismantling of old sheets here in before with two corrugation side lap, fixed with & including \"L\" type or \"J\" type or cranked hook boltsin roof covering, wall cladding etc., complete all as specified and as directed. |
| 6 | S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed |
| 7 | Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roof covering complete all as specified and as directed. |
| 8 | S&F 6 mm thick asbestos cement corrugatedor semi corrugated sheetwith side lap, fixed with \"L\" or \"J\" type or cranked hook bolts, nuts & washers etc.complete all as specified and as directed. |
| 9 | S&F 6 mm thick asbestos cement two piece adjustable serrated ridge forcorrugated or semi corrugatedsheetfixed with \"L\" or \"J\" type or cranked hook bolts, nuts & washers complete all as specified and directed. |
| 10 | S&F in repairs, suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Non Asbestos Fiber Cement plain Board (E-Board Classic)in & including a grid of GI system duly suspended with 4mmdia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed. |
| 11 | Demolition of brick or stone masonry work built in cement mortarincluding all quoins, arches, pillars etc complete all as specified and as directed. |
| 12 | M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 13 | M & L for brick work with subclass ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and as directed. |
| 14 | M & L Brick work with old subclass \"B\"bricks, laid flat in floors bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and as directed. |
| 15 | M & L Brickwork with old subclass `B\" bricks, laid on edge in floors bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and as directed. |
| 16 | Demolition ofplain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 17 | M&L for plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in hold fast block or bed block complete all as specified and directed. |
| 18 | M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smoothwithout using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic jointfilling at every 3m length and at corners complete all as specified and as directed. |
| 19 | M&L for 75 mm thick plain cement concrete (1:2:4)type B2 using (40 mm graded crushed stone aggregate) as in floors/ sub base of tiles/floor of hard standing/path etc complete all as specified and directed. |
| 20 | M&L for cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in surface channels and drains complete all as specified and directed. |
| 21 | M&L for PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in benching or kerbs complete all as specified and as directed. |
| 22 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 23 | Add or deduct for each 25mm girth or part thereof over or under 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc. complete all as specified and directed. |
| 24 | Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 25 | M&L for rendering 10 mm thick plasterin cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed |
| 26 | M&L for rendering 15mm thick plaster in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 27 | S&F in repair 2nd class hardwood Weather boarding, clean sawn, plain, 20mm thick or feather edged15 mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed. |
| 28 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each including builders hardwarecomplete all as specified and as directed. |
| 29 | Taking down chowkats or frames with shutters(without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed. |
| 30 | Taking down shutter of any description n exc 1 Sqm each complete all as specified and as directed. |
| 31 | Taking down shutter of any descriptionexc 1 Sqm but n exc 2 Sqm eachcomplete all as specified anddirected. |
| 32 | M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinnedat joints complete all as specified and directed. |
| 33 | S&F 30mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed. |
| 34 | S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etcwith plain, chamfered or rounded, mitred beads (without sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified anddirected. |
| 35 | S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etcwith plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed. |
| 36 | S & F factory made solid PVC door frameof size 50mm x 47mm made out of 5 mm thickplain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. |
| 37 | S & F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specfication, drawing and complete all as specified and as directed. |
| 38 | S & Fsteel windows with side hung shutters glazed shutter including both side openable (out side glazed window and inside fly proof window)including projecting type hinges with steel handle and steel peg stay complete with glazing bars and 12 mm square bar or round bar of approved design welded to steel window frame dovetailed or welded complete all as specified and directed . Note: Guard bar or square bar shall be measure and paid separately. |
| 39 | M & L for Anodized aluminium sliding glazed window shutter (double leaf glazed shutter and single leaf mosquito proof shutter each in single frame work) without sash bars with anodized aluminium shutter of section 40.00 mm x 20.00 mm x 1.10 mm thick and window chowkat of section 92.00 mm x 29.50 mm x 1.20 mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, tower bolts and locking arrangement etc. and 4 mm thick sheet glass, tinted quality on panel and aluminium anodized wire cloth for mosquito proofing, 0.45 mm nominal dia and average width of aperture 1.40 mm fixed with aluminium screws and tacks and making good to disturbed surfaces complete all as specified and as directed. |
| 40 | M&L for Anodized aluminium push pull type partly panelled and partly glazed door shutter (single leaf / double leaf) having top rail of section 85.00mm×44.45mm×2.00mm, bottom rail of section 85.00mm×44.45mm×2.00mm thick, door verticals of section 44.45mm×44.45mm×2.00mm thick and lock rail of section 85.00 mm× 44.45mmx2.00mm thick with aluminium anodized frame of section 63.50mm x 33.10mmx2.50mm thick including necessary jointing cleats, glazing clips, rubber packing snap beading, screws, handle and locking arrangements etc, including 12mm thick pre laminated particle board, interior grade pre laminated with decorative face laminations both sides on bottom panel and 5.5 mm thick float glass tinted quality on top panel and including 1 No of aluminium door closer per leaf (Diecast) body hydraulically regulated designation No 3 universal type complete all as specified and as directed. |
| 41 | S & F in repair aluminium door closer (Die-cast) bodyhydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and complete all as specified and as directed. |
| 42 | S & F in repairdouble action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. |
| 43 | S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 44 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 45 | S&F 150mm in size extruded aluminium handles, fabricated type, anodised complete all as specified and directed. |
| 46 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed |
| 47 | S & F 100 mm size stainless steel butt hinges, complete all as specified and as directed. |
| 48 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete. |
| 49 | S&F mild steel Framed work such as grills, gratings, angle iron, mild steel sheets, mild steel round bar, MS flat iron etc. for chowkhats or doors shutters or windows etc with ends of bars shouldered and/or riveted, wlded or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 50 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 51 | M&L for preparation of newly plastered surfaces of wallsand applying one coat of alkali resistant primer over a coat of white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc. complete all as specified and directed. |
| 52 | M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and as directed. |
| 53 | M & L for complete removal of existing treatment ofwalls surfaces and applying two coats of cement based paintover one coat of alkali resitant primer complete all as specified and directed. |
| 54 | M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described over 10cm width or girthand applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 55 | M&L for preparation of new or previously untreated surfaces of steel and steel based surfaces of any description, not otherwise described over 10cm width or girthand applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 56 | S&F strainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steelwire staples complete all as specified and directed. |
| 57 | S&F in repair stainlesssteel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steelwire staples complete all as specified and directed. |
| 58 | Hacking out old broken glass (any thickness, quality or description) from wooden frame or metal frame or aluminium frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 59 | S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed. |
| 60 | S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each panecomplete all as specified and directed |
| 61 | Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as specified and as directed. |
| 62 | M&L for glazed ceramic coloured tiles 300mmx200mmx 6mm to 7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps over andincluding 10 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 63 | M&L for10mm thick Vitrified tiles light shadearea of each tile n exc 0.36sqmlaid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 64 | M&L colouredNon-skid ceramic tiles 7 mm thick (Square/rectangular) area of each tileexceeding 0.06 Sqm but not exceeding 0.11 Sqmin floors etc. setand jointed in neat cement slurry and pointed in white or coloured cement to match existing surfaces over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 65 | M & L pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm butn exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6)including dismantling of old tiles of any description complete all as specified and directed. |
| 66 | Taking up or down 15 mm bore GI water tubing and connections including cleaning for re-fixingcomplete all as specified and as directed. |
| 67 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 68 | Refixing only old serviceable15 mm bore Steel tubing and connections as obtained from taking up/down old steel tubingincluding provision of new fittingsin new or old position to walls,ceiling, flooring etc. complete all as specified and as directed. |
| 69 | Taking up or down 20 mm bore GI water tubing and connections including cleaning for re-fixingcomplete all as specified and as directed. |
| 70 | S&F GI tubing 20 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 71 | Refixing only old serviceable20 mm bore steel tubing and connections as obtained from taking up/down old steel tubing including provision of new fittings in new or old position to walls,ceiling, flooring etc. complete all as specified and as directed. |
| 72 | S&F in repairs stop valves 15 mm dia cast copper alloy, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed. |
| 73 | Supply and fix in repairsstop valves 15 mm dia cast copper alloy,fancy type, chromium plated with long shankandcup (concealed type) screwed down high pressurecomplete all as specified and directed. |
| 74 | S & F in repairs, bib taps 15 mm dia cast copper alloy, chromium plated, fancy type with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed. |
| 75 | S & F in repairs, 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered \"HOT\" or \"COLD\" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed. |
| 76 | S & F 1000 litres capacity rotational moulded polye-thylene water storage tanks triple layer ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including 20 mm bore dia -ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc including dismantling of old tank of any description complete all as specified and directed. |
| 77 | S & F 500 litres capacity rotational moulded polye-thylene water storage tanks triple layer ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including 20 mm bore dia -ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc including dismantling of old tank of any description complete all as specified and directed. |
| 78 | S&F in repair20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed |
| 79 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc of capacityupto 1000 litre capacity tank and writing the date of cleaning on water tank with white paint complete all as specified and as directed. |
| 80 | S & F inrepairs, Vitreous China SquattingPan\"Orissa pattern\" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed. |
| 81 | S & F in repairs, vitreous china wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed |
| 82 | S&F in repairs Vitreous china urinal, half stall white (excluding flushing cisterrn) including urinal spreader, PVC connection, 40mm PVC waste pipe & 40mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe complete all as specified and as directed. |
| 83 | S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed. |
| 84 | S & F inrepairs, plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover including mild steel chromium plated or aluminised hinging devicecomplete all as specified and as directed. |
| 85 | S & F in repairs, vitreous china, wash hand basin, white, flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium platedsuitable for wash hand basins, with long screwed shanks and fly nuts andPVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed |
| 86 | S & F in repair 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 87 | S & F in repairs, 125 mm, dia chromium plated, swivel type shower rose suitable for fixing 15 mm bore iron pipe complete all as specified and as directed. |
| 88 | S & F in repairs, PVC connection pipe 15mm dia and600 mm long with PVC PTMT nuts at each ends with rubber washers complete all as specified and directed. |
| 89 | S & F in repairs, waste coupling PTMT (half or full threaded) (minimum weight 40 mm - 60 gms) suitable for Sink, with long screwed shanks and fly nuts of size 40 mm complete all as specified and as directed. |
| 90 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc, including cleaning and refixing or removal to store (meaasured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 91 | S&F in repairs 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floorcomplete all as specified and directed |
| 92 | S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed |
| 93 | Taking down steel rolling shutter, area of each shutterexceeding 10.00 sqm but not exceeding 20.00 sqm each of any type and description including cover, anchoring rod, rolling and puling system etcand carrying out neccessary repair/ replacement work to defective componentsand reassembling the rolling shutter including greasing, welding, drilling where required and refixing the shutter in theexisting location and making functional to the entire satisfaction of the Engineer in charge complete all as directed.( Note:The materials replaced under this item shall be measured and paid seperately as \" Supply only\" underrelevent items of this schedule. The shutter shall be removed carefully alongwith its accessories without damaging the adjacent structure. All the defective parts to be repaired/ replacedunder this item shalllay out at site for proper verification and approval of the Engineer in charge and shall be repaired /Replaced only after prior approval of the Engineer in charge. Necessary greasingeasing will be done to the appropriate parts/ spares/ fixturesfor smooth functioning of the shutter. |
| 94 | Supply only 100 mm dia 450 mm long SWG \"O\" high tensile spring conforming to relevent IS all as specified and as directed. |
| 95 | Supply only roller of steel pipe (shaft) confirming to heavy duty of size 50 mm nominal bore all as specified and as directed. |
| 96 | Supply only ball bearing of No 6213/6214 complete all as specified and as directed. |
| 97 | Supply only locking plate made of 3.15 mm thick reinforced with mild steel angle section not less than 35 x 35 x 5 mm size bottom complete all as specified and as directed. |
| 98 | Supply only guide channel made of mild steel deep channel section not less than 3.15 mm thick depth of channel 75 mm complete all as specified and as directed. |
| 99 | Supply only mild steel clip suitable for riveting to lath curtain complete all as specified and as directed. |
| 100 | Supply only lath section 1.20 mm thick for shutter width exc 35 m conforming to IS-6248-1979 (section of lath shall have a distance of 75 mm between rolling center) complete all as specified and as directed. |
| 101 | Supply only MS sheet 1.00 mm thick as in hood cover complete all as specified and as directed. |
| 102 | M&L for preparation of old decorated steel surface exceeding 10 cm in width and girth and applying one coat of aluminium paintcomplete all as specified and as directed. |
