University Gauhati University-UGU has published Construction Of Rcc G Plus 1 Vice Chancellor Office Building Of Gauhati University Construction Of Rcc G Plus 1 Vice-Chancellor Office Building Of Gauhati University Civil, Sanitary-Plumbing, Water Supply, Electrical Works And Site Development Works. Submission Date for this Tender is 11-11-2021. Electrical Maintenance Tenders in Gauhati University Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SITE DEVELOPMENT |
| 2 | CIVIL WORKS EARTHWORK: EARTHWORK IN EXCAVATION Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 4 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 5 | Treatment of soil under existing floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 6 | CEMENT CONCRETE WORKS PLAIN CEMENT CONCRETE WORKS : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 7 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).complete as directed |
| 8 | REINFORCED CEMENT CONCRETE WORKS Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 11 | STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 12 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete |
| 13 | Suspended floors, roofs, landings, balconies and access platform |
| 14 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 15 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 16 | MASONARY WORKS : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 17 | HALF BRICK MASONRY Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 18 | KOTA STONE FLOORING Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 19 | FINISHING CEMENT PLASTER (IN COARSE SAND) 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) |
| 20 | 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 21 | HORTICULTURE AND LAND SCAPING Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge |
| 22 | FOLIAGE AND SHADE LOVING PLANTS Providing and displaying of Araucaria cookie having ht. 1.80 m to 1.95 m, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 23 | Providing and displaying of Croton Petra Bangalore (Specimen ) variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh & healthy foliage approximately 60-65 leaves in 30 cm size of Earthen pot/ Plastic pot & as per direction of the officer-in-charge |
| 24 | Providing and displaying of Philodendron Envy mounted on moss stick 90 cm ht., well developed with full of fresh & healthy leaves in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 25 | SEASONAL PLANTS Providing and Displaying Pansy Hybrid Sakata in different colour specimen 6-8 in a pot with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/ Nand as per direction of the officer-in-charge. |
| 26 | ORNAMENTAL PLANTS Providing and Displaying Adenium Obesum well developed with fresh & healthy 4 to 5 branch 60 to 75 cm ht. in 40 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge |
| 27 | TREE PLANTS Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35- 40 cm well developed in big size HDPE bags as per direction of the officer-in-charge. |
| 28 | Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 29 | Black Outside Wall Cladding Tiles, Packaging Type: Cartoon Box ,Thickness: 15-20mm Specification: Material: Natural StoneDesign: StackingSurface: SandblastSize: 150x600mmShape: Horizontal Outside Wall Cladding Tiles-Umbra Black tiles are highly demanded for Outside Wall Cladding Tiles. This stone is very hard, non-porous and highly durable against all climate conditions. These tiles are available in textured finish. The size of each tile is 150x600mm. These are highly demanded by architects and interior designer for their projects in making villas and buildings from their outside wall.= Applications - Interiors, Exterior Elevation, Bathrooms, Living Rooms, Wall Tiles Designs, Wall Tiles, Tile for Walls, Stone Tiles. Product Specification Size 150x600 mm Packaging Type Cartoon Box Thickness 15-20mm Color black Surface Finishing Natural, sandblast Usage/Application Wall Decoration Design Stacking Pattern Strip Dimension 6x24 Interior Yes |
| 30 | OUT DOOR WALL FOUNTAIN BRAND - FAMOUS FOUNTAIN VOLTAGE- 220V FREQUENCY- 50 HZ USAGES- OUT DOOR APPEARANCE- MODERN |
| 31 | Smooth, Matte Crystal White Stone Pebbles, Dimensions: 75 Mm Product Specification Surface Finish Smooth, Matte Color White Usage/Application Landscaping, Garden, Pavement, Decorative Material Natural Stone, Pebble Stone Dimensions 75 mm Shape Tumbled, Oval, Random Packaging Size 25 Kgs Packaging Type Plastic Bags Brand Stone Stories |
| 32 | EXTERNAL ELECTRICAL WORKS Supplying and fixing of LED outdoor wall lamp fittings complete with all accessories .as approved by the Deptt.s etc. as required. Contemporary style LED outdoor wall lamp which offers beautiful ambient lighting and will brighten up your home exteriors in a subtle way. Light up your garden landscape, plants, balconies, home exterior, facade, driveway, garage and terrace with our range of waterproof, energy-efficient LED outdoor lights. Buy Modern LED Outdoor Wall Light Online in India at Best Prices. Total Fixture Dimensions (in inches): 4x5.5x8 Material: Aluminium Colour: Black Bulb Holder: Inbuilt LED |
| 33 | Supplying and fixing of JaquarLED strip batten light fittings complete with Shade, back plate including connection cable,5AMP Adaptor,as approved by the Deptt.s etc. as required. JANUS STRIP | 24W | 5M ROLL | Color - Warm White | SKU; JQM-WHT-LJNS02S012XW |
| 34 | Supplying and fixing of LED outdoor solar lawn light fittings complete with all accessories .as approved by the Deptt.s etc. as required. LED Ifitech Solar Garden Lawn Light, Solar Light, Solar Garden Lig, 2w Specification LED 200Lumens,3000K±300K Solar charging time 8-7 hours by bright sunlight Battery replaceable Li-ion battery Type solar garden lawn light Solar Panel monocrystalline silicon Material Aluminum Waterproof IP 65 Size 176*176*802mm Certification CE,ROHS,FCC,BV,BSCI,ISO Warranty 1 year |
| 35 | LAND DEVELOPMENT |
| 36 | CIVIL WORK EARTHWORK Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 37 | Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil |
| 38 | APPROACH ROAD & PARKING YARD |
| 39 | SITE CLEARANCE Clearing and Grubbing Road Land Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to beused or auctioned up to lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm thickness. (i) By Manual Means (A)In area of light jungle |
| 40 | GRANULAR SUB-BASES, BASES (NON-BITUMINOUS) AND SHOULDERS Granular Sub-base with Well Graded Material (Table 400.1) (B) By Mix in Place Method (Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density,complete as per cl. 401( Including cost of testing of materials at site and laboratory as directed by the deptt.) (ii) For Grading II Material |
| 41 | Water Bound Macadam Sub-base/base (A) By Manual Means Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding material to fillup the interstices of coarse aggregate,watering and compacting to the reqd. density ( with an initial lead of 5.0 km.) WBM Grading II Using stone screening Type-B 11.2 mm for Gr.II |
| 42 | WBM Grading III Using stone screening Type-B 11.2 mm for Gr.III |
| 43 | CEMENT CONCRETE PAVEMENT Inter locking concrete Block pavement (A) Interlocking pavement block (i) Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per technical specification clause 1504 complete including carriage. (a) Including Edge block/ Edge restraints |
| 44 | BRICK COVERED DRAINAGE |
| 45 | EARTHWORK: EARTHWORK IN EXCAVATION Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 46 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 47 | CEMENT CONCRETE WORKS PLAIN CEMENT CONCRETE WORKS : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 48 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete |
| 49 | MASONARY WORKS : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 50 | FINISHING CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster |
| 51 | Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 52 | Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface,properlyencased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. |
| 53 | WEEP HOLE Providing weepholes in brick masonry/stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 |
| 54 | MAIN BUILDING |
| 55 | CIVIL WORK EARTHWORK: EARTHWORK IN EXCAVATION Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 56 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 57 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 58 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration |
| 59 | Treatment of soil under existing floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 60 | CEMENT CONCRETE WORKS PLAIN CEMENT CONCRETE WORKS : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 61 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).complete as directed. |
| 62 | REINFORCED CEMENT CONCRETE WORKS Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 63 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 64 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 65 | STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 66 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete |
| 67 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 68 | Suspended floors, roofs, landings, balconies and access platform |
| 69 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 70 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 71 | Stairs, (excluding landings) except spiral-staircases |
| 72 | MASONARY WORKS : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 73 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 74 | WOOD AND P. V. C. WORK FRAMES AND TRUSSES Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood |
| 75 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). |
| 76 | Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) |
| 77 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) |
| 78 | Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm). |
| 79 | Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). |
| 80 | Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). (Contd.....) |
| 81 | Two track four panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / doubleglazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). |
| 82 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. |
| 83 | VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 1000x1000 mm (Floor area) |
| 84 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 85 | ROOFING Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, (Contd.....) |
| 86 | including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks |
| 87 | FINISHING CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 88 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) |
| 89 | 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 90 | Providing and applying putty in two coats of average 1 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 91 | INTERIOR FINISHING Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 92 | EXTERIOR FINISHING Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 93 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 94 | Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 95 | Wall Tiles Providing fixing and Fittings polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). Kajaria / Qoutone/ Somany Size: 600 mm x 1200 mm Finish: Polished Vitrified Number of Tiles/Box : 2 Sft/Box : 15.5 Sft/Tile : 7.75 |
| 96 | Floor Tiles (Toilet Area and kitchen area) Providing fixing and Fittings polished vitrified Floor tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). Kajaria / Qoutone/ Somany Size: 600 mm x 1200 mm Finish: Polished Vitrified Number of Tiles/Box : 2 Sft/Box : 15.5 Sft/Tile : 7.75 |
| 97 | Providing,fitting and fixing Laminated abrasion resistant wooden flooring of thickness not less than 8 mml laid on existing concrete floor withunderlayer of approved transparent polythene and foam sheet to make the floor surface even and sound free complete as directed and specified. |
| 98 | Providing,fitting and fixing Carpet tiles of size medium with thickness not less than 8mm made of 100% Olefin Polypropleyne material,with dual backing; Primary backing with PVC and Secondary with Reinforced Fibre glass fromUniproducts (India) Ltd.laid on existing concrete floor complete as directed and specified Multicolor Floor Carpet Tiles, Packaging Type: Box, Size: Medium Thickness 8 - 10 mm Usage/Application FLOOR Material Porcelain Color MULTI Size Medium Brand OSIS |
| 99 | Providing, fitting and fixing aluminium curtain wall on the exterior face of building fitting to concrete member by drilling hole fixing by brass screw fabricated with coloured anodised aluminium section of approved brand by providing aluminium jointing angles including providing 8mm thick coloured reflectory type glassfitted with aluminium at all levels. |
| 100 | Supplying,fittingand fixing of Automaticsliding door and operator, modular design including internal cover with operator dimensions (H X T) not exceeding 120mm x 175mm and of length required to suit the opening size given below: Clear opening of size 2400mm X 2400mm:compact linear sliding door automatic, with self cleaning rollers, TUV type tested as per DIN 18650.The Automatic sliding door consists of 16 bit Microprocessor Control unit, monitoring of closing force, automatic reverse on contact with obstruction, operator commissioning without any additional instrumentation and self-teaching.Operating Modes: Continuous open, automatic operation, closing time, night lock, multi-sensor detector(radar motion detector with direction detecion and self-monitoring, double 3D safeguard light curtain (light barrier) for convenient safeguarding of the opening width) with Electro magnetic locking, integrated in the drive unit, with manual emergency unlocking of GODREJ/GEZE make.The operator will be provided with short circuit proof power supply unit 220 / 240 V, 50 / 60 hz . |
| 101 | SANITARY INSTALLATIONS Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern |
| 102 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern |
| 103 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 200 mm |
| 104 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 105 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 106 | WATER SUPPLY C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes |
| 107 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal outer dia Pipes |
| 108 | BRASS FITTINGS Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore |
| 109 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 110 | C.P. BRASS FITTINGS Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular l 150 mm nominal size square 100 mm diameter of the inner hinged round grating |
| 111 | SEPTIC TANK AND SOCK PIT CIVIL WORK EARTHWORK: EARTHWORK IN EXCAVATION Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 112 | CEMENT CONCRETE WORKS PLAIN CEMENT CONCRETE WORKS : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 113 | REINFORCED CEMENT CONCRETE WORKS Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 114 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 115 | STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 116 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete |
| 117 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 118 | MASONARY WORKS : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 119 | HALF BRICK MASONRY Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 120 | CEMENT PLASTER (IN COARSE SAND) 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) |
| 121 | 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 122 | Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame - L.D. - 2.5 |
| 123 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 124 | EUROPEAN TYPE WATER CLOSET Providing fitting and fixingVitreous china Dual Flush / Floor Mounted Coupled / Extended water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) Jaquar make (KUBIX) KUS-WHM-35953BIUFSM Rimless, Blind Installation Wall Hung WC with UF soft close slim seat cover, Hinges, Accessories set, Size: 360x500x335 mm(VC Room,and Conferrence Room) |
| 125 | CONCEALED CISTERN Supplying, fiting and fixing concealed cisternwith all internal fittingswith CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) JCS-WHT-2431FP Single Piece Concealed Cistern Body (Front or Top Actuation) with Floor Mounting Frame, Installation Kit and “P-Type” Drain Pipe Connection Set for Wall Hung WC (without Flush Control Plate) -(VC Room,and Conferrence Room) |
| 126 | FLUSH CONTROL PLATE Providing fitting and fixing flush control plate with all instalation kit complete as directed and specified JCP-CHR-102415 Control Plate Ornamix Prime(VC Room,and Conferrence Room) |
| 127 | WASH BASIN Providing fitting and fixing vitreous Chinawash basin (Pillar cock, stop cocks, waste coupling are to be paid separately). complete as directed and specified Table Top Basin (Jaquar Make) (i) KUBIX (KUS-WHT-35901) Size: 595x440x185 mm (Secretary Cabin, Office Cabin, Staff Dining, VIP Dining, Interview Room, Waiting Lobby and Public Toitel) |
| 128 | (ii) ARC (ACS-WHT-87901) Size: 575x430x175 mm (VC Room,and Conferrence Room) |
| 129 | WASTE COUPLING Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. Jaquar make ALD-727 Click Clack Waste 32mm Size Full Thread With 80mm Height |
| 130 | BOTTLE TRAP Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. Jaquar make ALD-769L300x190 Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange |
| 131 | URINAL PARTITION Supplying fiting and fixing vitreous china division plate including fitting and fixing compete as directed and specified. Jaquar make Model No. 1810-UC Specifications Rectangular shaped urinal partition with frosted glass Glass: 8mm / 10mm Finish: Chrome JSE-CHR-110US450X H: 900 W: 450 |
| 132 | SOAP TRAY,SOAP DISH,LIQUID SOAP DISPENSER, GLASS SHELF Providing, fitting and fixingsoap tray / soap dish /Soap Dispenser etc complete as directed and specified. Jaquar Make (i) ACN-1135N Soap Dispenser with Glass Bottle(Secretary Cabin, Office Cabin, Staff Dining, VIP Dining, Interview Room, Waiting Lobby and Public Toitel) |
| 133 | (ii) ACN-1137N Soap Dispenser with Metallic Bottle (VC Toilet & Conferrence Room) |
| 134 | (iii) AKP-35731P Soap Dish Holder (VC Toilet) |
| 135 | (iv) ACN-1173 Corner Glass Shelf (with Bracket)- VC Toiet |
| 136 | TOWEL RAIL, TOWEL RACK Providing, fitting and fixing CP towel rail complete as directed and specified. Jaquar make (Kubix Prime) (i) AKP-35721P Towel Ring Square (Secretary Cabin, Office Cabin, Staff Dining, VIP Dining, Interview Room, Waiting Lobby and Public Toitel) |
| 137 | (ii) AKP-35711PS Single Towel Rail 600mm Long, Stainless Steel(VC Toilet & Conferrence Room) |
| 138 | (iii) AHS-1581H Towel Rack with Lower Hanger (Stainless Steel) with hook (VC Toilet) |
| 139 | MIRROR Providing fitting and fixing Decorative Mirror complete as directed and specified. Jaquar Make ACN-1193N Double Arm Wall Mounted Reversible Plain / Magnifying (X3) Pivotal Mirro (VC Toilet & Conferrence Room) |
| 140 | TOILET PAPER HOLDER Providing, fitting and fixing Chrome Plated TOILET PAPER holdercomplete as directed and specified. Jaquar make AKP-35753PS Toilet Roll Holder with Stainless Steel Flap |
| 141 | PILLAR COCK Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Jaguar make (i) SENSOR TAPS SNR-CHR-51011N Sensor Faucet for Wash Basin (Battery Operated)(VC Toilet & Conferrence Room) |
| 142 | (ii) KUP-35011BPM (KUBIX PRIME) Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses (Secretary Cabin, Office Cabin, Staff Dining, VIP Dining, Interview Room, Waiting Lobby and Public Toitel) |
| 143 | SINK MIXER Supplying and fitting fixing C.P. sink cock of 15mm dia of approved brand as specified and directed. Jaguar make (D’ARC) DRC-37165 Single Lever Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges |
| 144 | BIB COCK Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Jaquare make (i) KUP-35041PM (KUBIX PRIME) 2 Way Bib Cock with Wall Flange (VC Toilet & Conferrence Room) |
| 145 | (ii) OPP-15041PM (OPAL PRIME) 2 Way Bib Cock with Wall Flange (Secretary Cabin, Office Cabin, Staff Dining, VIP Dining, Interview Room, Waiting Lobby and Public Toitel) |
| 146 | HEALTH FAUCET Supplying fitting and fixing Health Faucet of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Jaquare make (i) ALD-573 Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook (Secretary Cabin, Office Cabin, Staff Dining, VIP Dining, Interview Room, Waiting Lobby and Public Toitel) |
| 147 | (ii) ALD-577 Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) (VC Toilet & Conferrence Room) |
| 148 | ANGLE VALVE Providing and fixing C.P. brass angle valve for basin mixer and geyser points . Jaquare make OPP-15053PM Angular Stop Cock with Wall Flange |
| 149 | SHOWER Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) Jaquare make OHS-CHR-1639 Maze Overhead Shower 300x300mm Square Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System |
| 150 | Bath & Shower Mixer & Hand Shower Supply, Installation, Testing & Commissioning ofBath & Shower Mixer/ Hand Shower- Jaquar make (i) FLR-5137 Single Lever High Flow Bath & Shower Mixer (Concealed Body) Wall Mounted Model with Button Spout (Composite One Piece Body) -(VC Toilet) |
| 151 | (ii) HSH-CHR-1655 Maze Hand Shower 95X95mm Square Shape Single Flow (Face Plate Stainless Steel & ABS Body in Chrome finish) with Rubit Cleaning System - (VC Toilet) |
| 152 | SHOWER ENCLOSURES Supplying and fitting fixing shower enclosures of approved brand of all necessary items as specified and directed. Jaquar Make - Mica Specifications Corner entry enclosure with one openale door in between and fixed glass on both sidesin 8mm Glass & Standard Glass: 8mm Finish: Chrome JSE-CHR-MICA8M10D391 H: 1950 W: 1000 x 1000 |
| 153 | Flush Valves (For Squating Plate) Supply, Installation, Testing & Commissioning ofFlush Valves and Plate - Jaquar make (i) FLV-1071 Concealed Flush Valve Complete with 32mm Size Control Cock & 75mm Long Operating lever |
| 154 | (ii) FLV-1093N Metropole Flush Valve Regular 40mm Size (Concealed Body) with Exposed Shut Off Provision & Round Flange |
| 155 | PVC PIPES,BENDS,JUNCTIONS,TEES ETC. Supplying, fitting and fixing PVC pipes of Double Socket Pipes (Supreme/Prince) or other ISIapproved including joining ,fitting and fixing wiyh clamps etc.as necessary completeat all levels including below G.L as directed and specified. (i) 75 mm dia. |
| 156 | (ii) 110 mm dia. |
| 157 | (ii) 160 mm dia. |
| 158 | Supplying, fitting and fixing 87.5 degree PVC bend of(Supreme/Prince) or other ISIapproved including joining ,fitting and fixingetc.as necessary completeat all levels including below G.L as directed and specified. (i) 75 mm dia. |
| 159 | (ii) 110mm dia. |
| 160 | (ii) 160 mm dia. |
| 161 | Supplying fiting and fixing 87.5 degree PVC bendwith doorof (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (i) 75 mm dia. |
| 162 | (ii) 110mm dia. |
| 163 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (i) 75 mm dia. |
| 164 | (ii) 110mm dia. |
| 165 | Supplying fiting and fixing PVCsingle tee with door of(Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (i) 110mm dia. |
| 166 | Supplying fiting and fixing PVC cross ‘T’ plain of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (ii) 110mm x110mm |
| 167 | Supplying fiting and fixing PVC coupler of (Supreme / Prince)or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (i) 75 mm dia |
| 168 | (ii) 110 mm dia |
| 169 | Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (iv) 110 mm x 75mm |
| 170 | Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. in exposed surface or trencesas necessary complete at all levels including below G.L. as directed and specified. (i) 75 mm dia |
| 171 | (ii) 110 mm |
| 172 | Providing fitting and fixing PVC cowel with Wired Mesh of ISI make completeas directed and specified. (i) 75 mm dia. PVC cowel of ISI make |
| 173 | (ii) 110 mm dia. PVC cowel of ISI make |
| 174 | ELECTRICAL WORKS W I R I N G Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 175 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 176 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 177 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 178 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 179 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 180 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch |
| 181 | 2 way 5/6 A switch |
| 182 | 15/16 A switch |
| 183 | 3 pin 5/6 A socket outlet |
| 184 | 6 pin 15/16 A socket outlet |
| 185 | Telephone socket outlet |
| 186 | TV antenna socket outlet |
| 187 | Bell push |
| 188 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate asrequired. |
| 189 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) |
| 190 | 3 Module (100mmX75mm) |
| 191 | 4 Module (125mmX75mm) |
| 192 | 6 Module (200mmX75mm) |
| 193 | 8 Module (125mmX125mm) |
| 194 | 12 Module (200mmX150mm) |
| 195 | Supplying and fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. as required. |
| 196 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 197 | MCCB, MCB & DB’S Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door |
| 198 | 12 way , Double door |
| 199 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door |
| 200 | 6 way (4 + 18), Double door |
| 201 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 202 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A |
| 203 | EARTHING Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 204 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 205 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 206 | Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required. |
| 207 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 208 | LIGHTNING CONDUCTOR Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 209 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 210 | FIRE DETECTION & ALARM SYSTEM INTELLIGENT FIRE ALARM SYSTEM Supplying, installation, testing and commissioning of microprocessor based intelligent addressable main fire alarm panel, central processing unit with the following loopmodules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touchscreen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealedmaintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. Two Loop Panel. |
| 211 | Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. |
| 212 | Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required. |
| 213 | Supplying, installation, testing & commissioning of fault isolator complete with base as required. |
| 214 | EPABX Supplying and fitting fixing of Hi-Path 1150M Digital Communication System equipped with the following:2 P&T Ports - 34 Extension Ports (upgradeable up to 50 extensions) Auto Call Back, Built-in FAX/DID 3 party Conference In-built Caller ID Supports PRI / BR Built in Voice Guided Direct inward Dialling 3 party Conference In-built Caller ID 100% Non- Block( SIEMENSor equivalent as approved by the Deptt.) |
| 215 | Supplying ,installation, testing & commissioning of Distribution Box 50 pairs with Krones ( SIEMENSor equivalent as approved by the Deptt.) |
| 216 | Supplying ,installation, testing & commissioning of Digital Profiset 3030 for one Touch Button & Busy Extension Indicator for Reception & Boss, ( SIEMENSor equivalent as approved by the Deptt.) |
| 217 | Supplying ,installation, testing & commissioning of Dedicated EPABX Earthing for trouble free operation( SIEMENSor equivalent as approved by the Deptt.) |
| 218 | Supplying ,installation, testing & commissioning of UROSET 2005 Analog Hand set( SIEMENSor equivalent as approved by the Deptt.) |
| 219 | Supplying ,installation, testing & commissioning of 2 pair Unarmoured Telephone Cable through existing conduit in surface/ recess system. |
| 220 | ELECTRIC STORAGE WATERHEATER(GEYSER) Supplying and fitting fixing of Electric storage water heater [Geyser] ofBajaj/Crompton/Racold/V. Guard or equivalent make including necessary connection cable,as approved by the Deptt.)etc. as required complete and as directed by the Department. (iv) 25.00 litres. Capacity (5 Star Model)(Crompton/Racold/V. Guard or equivalent make) (LOCATION- VC ROOM, SECRETARY ROOM, STAFF DINING ROOM AND VIP DINING ROOM) |
| 221 | LUMINARIES Supplying fitting and fixing of retrofit LED lamp in the existing luminaries. PHILIPS/ CROMPTON GREAVES/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR make. MASTER LED tube GA 1200mm 22W 840 G13 |
| 222 | Supplying and fixing of Jaquar/ Philips/ Wipro or equivalent LED round fittings complete with Shade, back plate including connection cable,as approved by the Deptt.s etc. as required. LED Round Light,12W |
| 223 | Supplying and fixing of Jaquar or equivalent Philips/ Wipro LED down lighter fittings complete with Shade, back plate including connection cable,as approved by the Deptt.s etc. as required. LED Downlight,2*2,24W |
| 224 | Supplying and fixing of Jaquar or equivalent Philips/ Wipro LED round fittings complete with Shade, back plate including connection cable,as approved by the Deptt.s etc. as required. LED Square front spot light,3W |
| 225 | Supplying and fixing of JaquarLED strip batten light fittings complete with Shade, back plate including connection cable,5AMP Adaptor,as approved by the Deptt.s etc. as required. LED Strip Batten,24W |
| 226 | Supplying and fixing of Jaquar or equivalent Philips/ Wipro LED outdoor light fittings complete with all accessories including connection cable,as approved by the Deptt.s etc. as required. LED Garden Light 5W |
| 227 | MCB, MCCB, RCCB Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hagermake) 40A |
| 228 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hagermake) 40A |
| 229 | 63A |
| 230 | LAN Providing, fixing & fitting of Solid Copper Cable Cat 6, 4 pair, UTP - 305m SCHNEIDER/LEGRAND or equivalentmake as approved by the Deptt.. |
| 231 | Providing, fixing & fitting Patch Panel Cat 6 UTP Keystone -24 Port- Loaded SCHNEIDER/LEGRAND or equivalentmake as approved by the Deptt.. |
| 232 | Providing, fixing & fittingPatch Cord Cat 6 UTPGray 1m - Moulded SCHNEIDER/ LEGRAND or equivalent |
| 233 | Providing, fixing & fitting Patch Cord Cat 6 UTPGray 2m - Moulded SCHNEIDER/LEGRAND or equivalentmake as approved by the Deptt.. |
| 234 | LIFT Supplying, installation, testing & commissioning of 6 passengers (408 kg.) lifts having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under: KONE/THYSEEN KRUPP i) Speed: 1.0 mtr. Per second ii) Floor : Ground floor to 2nd floor ii) Travel : 10.2 mtrs. (2 Floors x 4.2 mtr. height) iv) Stops & opening: 2 stops & 2 openings v) Controller: AC variable voltage & variable frequency. vi) Automatic rescue device complete with dry maintenance free batteries as required. vii) Operation: Microprocessor based simplex selective collective with/without attendant viii) Power: 415V, 3 phase, 50 Hz, 4 wires system ix) Type of doors: (Contd.....) |
| 235 | a) Car: Power operated, centre opening, horizontal sliding stainless steel scratch proof (moon rock finish) b) Landing doors: MS doors finished with spray painting of approved shade. c) A hand rail not less than 600mm long at 900mm above floor level to be fixed adjacent to control panel in the lift car. d) Voice announcement system in the car to anounce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. |
| 236 | CCTV Supplying installation testing of UTP CAT6 Cable without PVC conduit |
| 237 | FIRE FIGHTING Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) BRAND: FIRESTOP / FIREND / FIRESHIELD |
| 238 | Supply, Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built – In pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle As per IS:13849 with ISI mark(05 kg capacity) BRAND : FIRESTOP / FIREND / FIRE SHIELD |
| 239 | AIR CONDITIONER Supply of 415v - 3 Ph - 50 Hz TopDischarge Modulartype heating/coolingNext Generation Variable Refrigerant Flow system, each Outdoor unit comprises of All 100% Inverter Driven Double Scroll Compressors, air cooled condenser with protective coated fins heat exchangement Corrosion fin factory coated ,Propeller type Fan with motor, Outdoor must be capable of working within Wide Range of Voltage fluctuation from 320V to 460V, auto addressing setting, refrigerant cooled PCB, electronic expansion valve, Outdoor mounting frame, microprocessor panel,subcooler,accumulator,isolating valve.VRF system shall be suitable for working on 54degree centrigrate. The unit shall be suitable for operation with R-410a refrigerant. 1. Outdoor Units : i. 26HP VRF Outdoor Unit ii. 20HP VRF Outdoor Unit iii. 18HP VRF Outdoor Unit iv. 16HP VRF Outdoor Unit (Contd....) |
| 240 | 2. Indoor Units with cordless remote : i. 4.0TR 4way Cassette AC ii. 3.2TR 4way Cassette AC iii. 3.0TR 4way Cassette AC iv. 2.6TR 4way Cassette AC v. 2.2TR 4way Cassette AC vi. 2.0TR 4way Cassette AC 3. Refnets for indoor unit VRF Out door shifting at Ground Floor , Installation with Rubber ,Testing -Flushing with N2 &Pre Commissioning .Out Door Unit and Indoor Unit Installation. Hard/Soft Copper Piping suitable for VRFwith 13mm/19mm Nitrile rubber insulation with fitting,support and brazed for suction and liquid line. 2x.75sqmm Cu Communication Cable withconduit.Refrigerant Gas-R410A Charging. Total 116HP |
| 241 | CCTV Supplying and fixing of 4 MP HD Dome Day Night (IR) Camera/3.6MM/20 Metre. Make CP Plus |
| 242 | Supplying and fixing of 32 Channel DVR/H.265/4MP/5MP/4k @ 7fps,6MP @10fps,5MP @12fps,4MP @15fps,3MP. Make:CP Plus/Equivalent |
| 243 | Supplying and fixing of 8TB Sata Surveillance HDD. Make: WD/Seagate/Equivalent |
| 244 | SMPS for CCTV System. Make: CP Plus/Dlink/Equivalent |
| 245 | 2 KVA LI UPS. Make: Numeric |
| 246 | Connector (DC & BNC) for CCTV System |
| 247 | 55"" LED IPS DISPLAY. Make Panasonic |
| 248 | LAN Supplying, installation testing and commissioning 24port Gigabyte switch |
| 249 | FITTING AND ACCESSORIES Supplying including fitting fixing of following Exhaust fan in the existing hole on the wall of as required complete and as directed by the Department. Type Vento Jet 300MM. Make:Havells |
| 250 | AUDIO VISUAL SYSTEM TELEVISION/VIDEO SYSTEM Supply, Installation, Testing and Commissioning of 85"" Sony TV X85J | 4K Ultra HD | High Dynamic Range (HDR) | Smart TV (Google TV) (ForConference Room ) |
| 251 | Supply, Installation, Testing and Commissioning of 43"" Sony TV | X74| LED | 4K Ultra HD | High Dynamic Range (HDR) | Smart TV (Android) (For Conference Room-2 Nos & VC Chamber-1 No) |
| 252 | AUDIO SYSTEM Supply, Installation, Testing and Commissioning of CCS 700 Chairman Unit. Brand-Bosch. Model No-CCSE-CML, Mounting -Tabletop, Operating Temperature -5 degree celsius to +45 degree celsius,Nominal Acoustic Input at the microphone-85db SPL,Frequency 400Hz to 10Khz etc (For Conference Room, Meeting Room and Interview Room each) |
| 253 | Supply, Installation, Testing and Commissioning of CCS 700 Delegate Unit. Brand-Bosch. Model No-CCSE-CU, Mounting -Tabletop, Storage Temperature -40 degree celsius to + 70 degree celsius,Nominal Acoustic Input at the Microphone-85db SPL (For Conference Room-30 Nos, Meeting Room-30 Nos and Interview Room-8 Nos) |
| 254 | Supply, Installation, Testing and Commissioning of Conference Controller Unit, Brand-Bosch. Input Impedance 4.7 Kohm, Center Frequencies of filters-250 Hz, 2 Khz and 8 Khz, Filter Bandwidth 1 octave, Boost Cut at Center Frequencies - +6db 60 -6db,Equilizer transfer gain +/- 1db, Rated output impedance 100ohm, PA Output SNR- More than -50db at rated output etc (For Conference Room, Meeting Room and Interview Room each) |
| 255 | CA10 Meter Extension Cable (For Conference Room, Meeting Room and Interview Room each) |
| 256 | Supply, Installation, Testing and Commissioning of Two Way Wall Mounted Speaker, Brand-Bosch. Power-Maxium 22.5W and Rated 15W, Power Taps-15/7.5/3.75/1.9 W, Sound Pressure-98/86 db, Frequency Range-95 Hz to 19.5 Khz,Input Voltage 11/70/100 V, Transducer-Woofer 4.0"", Dome Tweeter 0.51"" (For Conference Room-4 Nos, Meeting Room-2 Nos and Interview Room-1 No) |
| 257 | Supply, Installation, Testing and Commissioning of Mixer Amplifier, Brand-Bosch. Model PLE1ME120. Power consumption 60W (For Conference Room, Meeting Room and Interview Room each) |
| 258 | PROJECTION SYSTEM Supply, Installation, Testing and Commissioning of Model No-VPL EX450, Brand-Sony. Value driven, eco friendly portable projector ideal for conference room/ large training room environment.3600 lumens bright, delivers remarkbly bright image. The EX450 features dual HDMI and USB inputs and upto 1000 hours of lamp life. (For Conference Room) |
| 259 | Supply, Installation, Testing and Commissioning of Motorised screen. 8 x 10 Motorised Projection Screen |
| 260 | DECORATIVE HANGING LIGHT Wood Grain Slim Led Linear Pendant 47.24"x2.76"x1.57" 18W 2700K-6500K Wood Long Bar Lighting for Office Commercial Area Study Room with Adjustable Cord(100cm) (LOCATION - VC CABIN) Specifications Bulb Included Or Not:YES Bulb Type:LED Category:Pendants Cct:6500K Chain/cord Adjustable Or Not:Cord Adjustable Chain/cord Length:39" (100 cm) Cri:CRI >80 Finish:Wood Finish (Contd....) |
| 261 | Fixture Height:1.5" (4 cm) Fixture Length:47" (120 cm) Fixture Material:Aluminium Alloy Fixture Width:3" (7 cm) Installation Type:Suspended Lampshade:Acrylic Lifespan:50000H Light Direction:Down Lighting Light Source:LED Lighting Area:8m²-10m² Number Of Bulbs:1 Light Shipping Weight:2KG Shown Color:Wood Grain Specialty Shape:Linear Style:Contemporary/Modern Voltage:AC100-240V Wattage:18W |
| 262 | Conference Room LED Rectangular Pendant Lighting 1.Item Code: MY-DD019 2.Materials: Metal and PMMA ,LED pendant lighting 3.Input voltage:AC 110-240V 50/60Hz 4.Light Source:Incandescent bulb, Energy Savinglamp or LED lamp 5.Bulb type:LED strip 6.Bulb power: Fluorescent Halogen or LED or Incandescent bulb 7.Bulb include or not: include 8.Mount method: Suspension/Gord chain 9.Cord Length: Adjustable 10.Control mode: Knob Switch 11.Application: Living Room, Dining Room, Study room, Bedroom,Restaurant, Lobby, Bar,Coffe Shop,Others 12.Item size: L800/1000/1200mm 13.Number of Lights: led strip or SMD led 14..Type: LED pendant lamp 15.Shade Color: Black or Wooden or other color can be custom 16.Fixtures Color:Black or Wooden or other color can be custom |
| 263 | Contemporary style LED outdoor wall lamp which offers beautiful ambient lighting and will brighten up your home exteriors in a subtle way. Light up your garden landscape, plants, balconies, home exterior, facade, driveway, garage and terrace with our range of waterproof, energy-efficient LED outdoor lights. Total Fixture Dimensions (in inches): 2.5x2.5x4.5 Material: Aluminium Colour: Black Bulb Holder: Inbuilt LED |
| 264 | 3-Light 80/60/40/20 cm LED Pendant Light Metal Acrylic Ring Circle Design Painted Finishes 90W/113W 3-Rings 4-Rings Dimmable with Remote Control (LOCATION - RECIPTION AREA) Specifications Light Information Type: Pendant Light Style: Modern Contemporary, Circle Features: LED Suggested Space Fit: Study Room / Office, Dining Room, Living Room, Game Room, Kids Room Suggested Room Size: 40-50? Finish: Painted Finishes Light Direction: Ambient Light Power Consumption (W): 75/113/125 Special selected products: hot Suitable Rooms: Living Room Design: Circle Dimensions (Contd....) |
| 265 | Fixture Height (cm): 2.5 Fixture Width (cm): 80/60/40 Fixture Length (cm): 80/60/40/20 Chain/Cord Length (cm): 150 Chain/Cord Adjustable or Not: Chain / Cord Adjustable Bulb Information Initial Lumens (lm): 7650 Bulb Type: LED Color Temperature (k): 3000/4500/3000-6000 Number of Bulb: 3-Light Light Source Included or Not: LED Light Source Included Wattage per Bulb (W): 60/90 Bulb Base: LED Integrated Material Fixture Material: Aluminum Shade Material: Acrylic |
| 266 | ADDRESSABLE FIRE Alarm & CONVENTIONAL FIRE Alarm DETECTION SYSTEM Supply, Installation, Testing, Commission of Loop card for Addressable Panels make-MORLEY/FIRELITE/Apollo or equivalent as approved by the Deptt.) |
| 267 | Supply, Installation, Testing, Commission of Addressable Semi Flush Mounting Resettable (NonBreaking Glass) MCP, Supplied with Special Reset Tool BRAND :MORLEY/FIRELITE/Apollo or equivalent as approved by the Deptt.) |
| 268 | Supply, installation, testing & commissioning of intelligent plug in photo electric Smoke Detectors having features like integral communication, dual LED for 360° viewing angle, walk test with address display etc. UL / LPCB approved,make: HONEYWELL, MORLEY IAS, Model : MI - PSE or equivalent as approved by the Deptt. |
| 269 | Supply, installation, testing & commissioning of Monitor Module.UL / LPCB approved,make- Honeywell , MORLEY IAS or equivalent as approved by the Deptt.)with housing box |
| 270 | Supply & fixing of 2X1.5sq. mm. PVC insulated copper Armoured Cable on surface/ recess/ above false ceiling etc. as required. (ISI marked) ) |
| 271 | Supply and fixing 19 mm dia 2.00mm average wall thicknessheavy rigid PVC IS: 9537 Part - IIIconduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed systemincluding cutting the wall and making good the same as required: |
| 272 | L.T. PANEL & ACCESSORIES Supplying, Fabrication, Erection ,Testing commissioning of vermin and dustproof(IP-43 protection)totally enclosed cubical type compartmental floor mounting panel board of size 1950mm 1600mm x 500mm made of 16 SWG(1.66mthick C.R. sheet and 300mm x 30mmx5mm MS Angle having4 nos legs at the bottom and C.R. sheet roofing on the top complete with 2 coats of Red Oxide metal primer and painting with powder coated paint. The panel board is to be erected in 1 :3:6 PCC foundation including excavation Complete neatly Wiring done, with the provision for the following Electrical Accessories. Incomer 1. 400A 4Pole 50KA AC415V with D.P. Handle MCCB OUTGOING MCCB 3P+N 15 Nos. 4. 0-500 V(Digital)Voltmeter 5. 0-500 A (Digital) Ammeter 6. Voltmeter S/S in 3 position 7. Ammeter S/S in 3 Position 8. Indicator Lamp (R,Y, B) 9. 2A Solid Lock fuse 10. 400/5 C.T Coils 11. Control Wiring Incoming and Outgoing MCCB/MCB will be paid extra. |
| 273 | Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure)of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 35/36 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemensmake) 400A |
| 274 | Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemensmake) 40A |
| 275 | 63A |
| 276 | Supplying with fitting and fixing Four Pole 415V Front handle operated On Load Change over switch (IP-20 protection powder painted sheet steel enclosure fitted on angle iron frame of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider, legrand, L&Tmake) 250A |
| 277 | 400A |
| 278 | U.G.CABLE Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV GSolid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1)1988 armoured U.G. cableU.G. cable laid in ground/partially in air (as required for termination over groundincluding excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris etto proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 & 1/2 Core A2XFY 240.00 Sq.mm.3 & 1/2 Core armoured U.G. cable |
| 279 | Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1)1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch,through medium duty G.I. pipe(Tata/ Nezonemake or equivalent as approved by the Deptt)bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) 240.00 Sq.mm 3&1/2 Core U.G. cable through 100mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
