|
| 1 | Supply at the work site of 09 (nine) mtr. long swaged & welded steel tubular pole of designation 410 SP 30 withbase plate, pole cap etc. complete.Respective lengths of bottom, middle & top portions are 5.00 mtr. (139.70 x 5.40) mm, 2.00 mtr.(114.30 x 4.50, )mm, & 2.00 mtr (88.90 x 3.25) mm. Make: India Poles Corporation/ Skipper Ltd./ Utkarsh Tubes & Pipes Ltd. / Royal Engineering Co/ BPPPL. (Rate analysed through obtained quotations). |
| 2 | Supply at the work site of 1.5 mtr. long (each arm), 48.3 mm dia.double arm bracket having suitable through bolting and luminaire fixing arrangement as per necessity. (Rate analysed through obtained quotations). |
| 3 | Supply at the work site of 1.5 mtr. long (each arm), 48.3 mm dia.four arm bracket having suitable through bolting and luminaire fixing arrangement as per necessity. (Rate analysed through obtained quotations). |
| 4 | Dismantling steel tubular pole/Rail pole/Strut pole embedded in CC foundation incl. excavation, filling of holes, restoring surface, loading at site and delivering, unloading, sorting, stacking properly at any place as per direction upto a lead of 1.6 km. |
| 5 | Erection of double arm bracket on the top of steel tubular pole upto 10mtr. height with through bolting arrangement and all necessary hoisting items, labour etc. complete. (Rate obtained through quotations, Lenin Sarani |
| 6 | Erection of four arm bracket on the top of steel tubular poleupto 10mtr. height with through bolting arrangement and all necessary hoisting items, labour etc. complete. (Rate obtained through quotations, Lenin Sarani vetted rate) |
| 7 | Erection of Single Steel tubular pole of length as given below with/without sole plate & cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal / stone chips including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store /Place shown by department to work-site including filling up the excavated earth pit with shifted soil and ramming properly. upto 9 mtr. (0.60 x 0.60 x 1.70) mtr. |
| 8 | Supply at the work site of 4C x 16 sq.mm Al. conductor, XLPE insulated, armoured, overall PVC sheathed, 1.1 KV grade power cable conforming to IS: 7098(Part-1) 1988 with latest amendments. Make: Polycab / Finolex / KEI / Havells. Analysed Rate, KEI LP 01.05.21. |
| 9 | Laying of one No. cable upto 35 sq.mm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per meter, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. |
| 10 | Laying only Cable upto 50 sq.mm through existing RCC/Hume/ GI Pipe/open masonry trench for single, 2, 3, 3½& 4 core. |
| 11 | Supplying & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing materials as required. 65 mm dia. |
| 12 | Jack pushing of requisite size for road crossing / similar application for passage of cable with all requisite tools , labour etc. complete as per direction of EIC. |
| 13 | Cutting chase upto 125mm x 150mm and subsequent mending of damages in concrete or similar surface/ wall. |
| 14 | Supply at the work site of Green Line road lighting luminaire (complete set to ensure proper functioning) with high power LED and unique peanut lens to ensure uniform light distribution. Make: Philips (Cat. Ref. BRP409 LED130 CW SLA FG PSU GR V2, SPD version)/ appvd. equivalent from Crompton / Wipro / Bajaj. Analysed Rate, Philips LED PL Effective 1st Feb. 2021. |
| 15 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe. |
| 16 | Excavation of soil for installation of Earth Electrode and filling and ramming. For soft soil. |
| 17 | Excavation of soil for installation of Earth Electrode and filling and ramming. For morrum soil. |
| 18 | Extra for treatment of soil by using salt & charcoal or cokefor electrode. |
| 19 | Connecting the equipment to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor/through pipe with staples buried inside wall/floor as required and making connection to equipment with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Solid GI wire. a) 4 SWG |
| 20 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 core 16 sq. mm. |
| 21 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 16 sq. mm. |
| 22 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. upto 9 mtr. long pole. One coat of red lead / zinc chromate priming. |
| 23 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. upto 9 mtr. long pole. 1st coat of synthetic enamel paint over the primer. |
| 24 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. Above 9 mtr. long pole. 2nd coat of synthetic enamel paint over the 1st coat.ate vetted by KMDA, Lenin Sarani. |
| 25 | Supply & installation on a suitable masonry plinth of Street Light Control Kiosk of size 900mm x 750mm x 450mm, made of 14 SWG MS sheet and comprising of the following,-a) One set 63A (10KA) FP MCB of Legrand/Siemens/ABB make.b) One set suitable timer (Astro, L&T) with 70A (at AC3) capacity 3 pole power contactor (ML4) of L&T make with requisite auxiliary contacts.c) One no. toggle switch & one no. 2A capacity slide lock fuse.d) Suitable neutral bar- 01 set.e) 40 A / 63 A capacity SP MCB (10KA) (complete set) –06 nos. Make: Legrand/Siemens/ABB.f) Separate lockable compartment for installation of Energy Meter.All the interconnections inside the kiosk are complete with suitable size copper wire, necessary glands, sockets etc. The box is painted with two coats of anticorrosive red-oxide primer & two coats of bus-green paint complete with earthing attachment etc. as per direction & satisfaction of EIC. Making plinth with all requisite materials & labour is included. |
| 26 | Installation of LED light fittings at the outer end of erected pole arm bracket with all necessary connections including supply of requisite materials & labour for upto 10 mtr. height. Rate obtained through quotations ate vetted by KMDA, Lenin Sarani. |
| 27 | Supply & fixing on pole with all necessary connections & items of outdoor type dust & vermin proof 3-ph pole box (300mm x 200mm x 125mm) made out of 2mm thick CRCA sheet painted with powder coated paint through seven tank process having 4 nos. terminal suitable for termination of 3nos. 4cx25sq. mm Al. armoured cable with glanding arrangements, earth bolt, earthing terminal and 6A SP MCB of Legrand. Rate obtained through quotations, rate vetted by KMDA, Lenin Sarani. |
| 28 | Removal of existing light fittings from the bracket mounted on the top of erected Steel Tubular Poles/ Concrete poles/ Rail Poles etc. and depositing at store of same as per departmental instruction. Rate obtained through quotations, rate vetted by KMDA, Lenin Sarani. |
| 29 | Supply at the work site of 1100 volt grade 1.5 sq. mm HRFR PVC insulated unsheathed single core industrial grade flexible copper cable conforming to IS: 694. (Ph., N & E) from pole box to light fitting as per direction of EIC. Finolex/KEI/ Polycab/Havells. (Analysed Rate, Ref. Havells LP 02.01.2018), rate vetted by KMDA, Lenin Sarani. |
| 30 | Drawal of 1100 volt grade 1.5 sq. mm FR PVC insulated single core stranded copper wire conforming to IS: 694:1990 (Ph., N & E) from pole box to light fittings as per direction of EIC. Rate obtained through quotations, rate vetted by KMDA, Lenin Sarani. |
| 31 | Providing CC (6:3:1) muffing (450 x 450x 600) mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if any incl. fixing only loop box if necessary. Without loop box. |
| 32 | GST @ 12% |
| 33 | Cess @ 1.0% |
