Military Engineer Services-MES has published Repair To Flooring, Joinery, Plastering And Sanitary Fittings And Roof Treatmrnt At Otm Accn Of Zone C To F At Military Station Sri Ganganagar Repair To Flooring, Joinery, Plastering And Sanitary Fittings And Roof Treatmrnt At Otm Accn Of Zone C. Submission Date for this Tender is 10-11-2021. Civil Work Tenders in GE Sri Ganganagar Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-Oct-2021 | amndt | BOQ | 03-11-2021 |
| 2 | 03-Nov-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-11-2021 |
| Sl. No. | Item Description |
| 1 | Dismatiling brick tiles or terracing tiles, single layer on roofs and mud phuska complete all as specified and directed by Engineer - in -Charge. |
| 2 | Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed by Engineer - in -Charge. |
| 3 | M&L for Roof treatment to RCC roofas follows :- (a) Cleaning the roof surfaces thoroughly using wire brushes to remove sharp projections,cleaning joints,washing,drying and removing all dirt/dust to receive concrete padding/ plaster etc complete.(b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:4)with WPC , finished even and smooth without using extra cement.(c) Providing one coat of approved bituminous primer @ 100 gms per sqm, over dried plastered surface (d) Laying 3 mm thick APP based polymeric membrane,(mineral finish) minimum weighing 3 Kg/Sqm reinforced withnon woven polyster fabric (weight not less than 150 gms/Sqm) by torch application. The overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by Engineer-in-Charge. Makes:-STP/ Dr Fixit/Pidilite . Notes:(i) All joints and change in directions should be covered with cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement/ as per site requirement and cured well before laying membrane by torching. (ii) All angles and abuttments should be sealed well with extra care to ensure full bondage.(iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only.The name of firm shall be got approved from GE before carrying out the work. (iv) The independent testing of membrane for technical parameters given in particular specificationsshall be carried out from Govt approved labs having fascilities for testing of membrane. (v) The guarantee of treatment shall be for minimum 10 yearsreckoned from date of completion of whole work |
| 4 | S&F heat resistance tiles ofsize 300x300x10mm thick on roof slab of any colour approved over and laid including 15mm thick in CM 1:4.Techinical specification of roof tiles shall be as prer IS 4457:2007.Make: Johnson Endura , Kajaria, Orient |
| 5 | Demolition of cement concrete (unreinforced)any description and in any position for sunken portion(below or above ground level) |
| 6 | M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below complete all as specified and directed by Engineer-in-Charge:-(a) applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface(b) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc.(c)Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls(d)Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e)Provision of glass fiber mesh of 2 x 2 mm immediately on above coating(f) Apply second coat of two component modified polymer coating after 72 hrs(g) Cement concrete 1:4:8 D2 75 mm thick over the coating as per requirment(h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm(j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete all as specified and directed by Engineer-in-Charge. Make:- Dr. Fixit/Fosroc/STPNote: (i)PCC filling in sunken portion will be measured seperately. |
| 7 | M&L for PCC (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete or filling in sunken floor complete all as specified and directed by Engineer-in-Charge. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed by Engineer - in -Charge. |
| 9 | M&L 450x300 x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles and incliding 10mm thick backing coat in CM 1:4. Make :- Johnson, Orient, Asian, Kajaria |
| 10 | M&L Non- skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and incliding 15mm thick screed in CM 1:4. complete all as specified and directed by Engineer - in -Charge. |
| 11 | M & Lmachine cut kota stone slab flooring 20-25mm thick(minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm of screed bed in CM 1:6.completeall as specified and directed by Engineer - in -Charge. |
| 12 | M & L machine cut kota stone slabs as in vertical surfces such as risers of steps 20-25mm thickover cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edgesincluding 10mm of backing coat in CM 1:4, completeall as specified and directed by Engineer - in -Charge. |
| 13 | M & L granite (of any type)work16 to 20 mm thick(table rubbedand polished) in cooking platforms and like in cement mortar 1:4including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm of screed bed in CM 1:6.completeall as specified and directed by Engineer - in -Charge. |
| 14 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed in CM 1:6 completeall as specified and directed by Engineer - in -Charge. |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for completeall as specified and directed by Engineer - in -Charge. |
| 16 | M & L for steel / Iron work as in doors or gates of angle or other section with gusset plates, rails, braces, iron sheets for cupboard etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (including of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290(Grade-165).completeall as specified and directed by Engineer - in -Charge. |
| 17 | Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engineer-in-Charge. |
| 18 | M&L providing precast cement concrete 1:2:4 Type B1 as in cover slabs (for manholes etc)and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.(Note : The rate quoted shall be deemed to include use and waste of necessary form work) |
| 19 | M&L TMT bar 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 20 | Providing precast RCC Jalliesany shape ( cement concrete Type B0 1:2:4 12.5mm gragded aggregate) louvres and jallies,40 mm thick (measured solid), including allmouldings set in CM 1:4 completeall as specified and directed by Engineer - in -Charge. |
| 21 | Demolition concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) completeall as specified and directed by Engineer - in -Charge. |
| 22 | M&L75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate)filling and mass concrete completeall as specified and directed by Engineer - in -Charge. |
| 23 | M&L 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded aggregate finished even and fair. completeall as specified and directed by Engineer - in -Charge. |
| 24 | M&L for sand filling (25mm thick) under floors or in foundations including watering and consolidation completeall as specified and directed by Engineer - in -Charge. |
| 25 | M&L Machine pressed precastrubber moulded concretecoloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigmentM-35 Grade 20mm graded stone aggregate) completeall as specified and directed by Engineer - in -Charge. |
| 26 | M&L providing precast cement concrete in PCC (1:2:4) type B-1 with 20 mm graded aggregate for kerb stone and similar works with plain fair finishes including chamfers, weatherings, throat- ing etc. and setting in mortar (1:4) complete with joints to match completeall as specified and directed by Engineer - in -Charge. |
| 27 | M & L for 75mm thick cement concrete type C-1, 1:3:6 using 20mm graged aggregate as in plinth protection completeall as specified and directed by Engineer - in -Charge. |
| 28 | M & L for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graged aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cementcomplete all as specified and directed by Engineer - in -Charge. |
| 29 | Demolition of brick work built in cement mortar of any descriptioncomplete all as specified and directed by Engineer - in -Charge. |
| 30 | M&L brickwork withsub class `B" Bricks, straight or curved on plan exc 6m meanradius, built in CM 1:6complete all as specified and directed by Engineer - in -Charge. |
| 31 | Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer - in -Charge. |
| 32 | M&L 15mm thick rendering in CM 1:6 to brick/ concrete wall surfaces finishedeven & smooth w/o using extra cementcomplete all as specified and directed by Engineer - in -Charge. |
| 33 | M&L 15mm thick rendering in CM 1:4 to brick/ concrete wall surfaces finishedeven & smooth w/o using extra cementcomplete all as specified and directed by Engineer - in -Charge. |
| 34 | M&L, 5mm thick rendering in CM 1:3 on fair faces of concrete surfaces as on ceilings finished even and smooth without using extra cementcomplete all as specified and directed by Engineer - in -Charge. |
| 35 | M&L for preparation of newly plasered surfaces of walls and applying two coat of distemper oil emulsion over one coat of wall care putty as preparatory to distempering complete all as specified and directed by Engineer-in-Charge |
| 36 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint,over a coat of chalk whiting complete all as specified and directed by Engineer-in-Charge. |
| 37 | M&L forpreparation of new plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed by Engineer-in-charge. |
| 38 | M&Lfor preparation of old decorated plastered or un-plastered surfaces of walls by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and applying two coats of cement base paintcomplete all as specified anddirected by Engineer-in-Charge. |
| 39 | M&L for preparation of old decorated plastered or un-plastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil emulsion distemper complete all as specified and directed by Engineer-in-Charge. |
| 40 | M & L for preparation ofold decorated plastered surfaces of ceilings by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash complete all as specified and directed by Engineer - in -Charge. |
| 41 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed by Engineer - in -Charge. |
| 42 | Taking down chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each completeall as specified and directed by Engineer - in -Charge. |
| 43 | Taking downsteel window / ventilators ( not exc 1.5 Sqm each) complete all as specified and directed by Engineer - in -Charge. |
| 44 | Taking down shutters of any description exc 1 Sqm but n exc 2 sqm each complete all as specified and directed by Engineer - in -Charge. |
| 45 | Taking down shutters of any description exc 1 Sqm but n exc 2 sqm each and refixing in same opening complete all as specified and directed by Engineer - in -Charge. |
| 46 | M&L pressed steel frame for doors size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer - in -Charge. |
| 47 | M&L providing cement concrete (1:3:6) type C1 for filling in pressed steel frames and other similar items etccomplete all as specified and directed by Engineer - in -Charge. |
| 48 | S & F 35mm thick factory made shutter, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatscomplete all as specified and directed by Engineer - in -Charge. |
| 49 | S & F Second class hard woodglazed and skeleton window shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number& fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a).complete all as specified and directed by Engineer - in -Charge. |
| 50 | S & F Fiber Glass Reinforced plastic (FRP) Door Frames of required colour of three legged of cross section 90mmx45mm having single rebate of 32mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame molded with fire retardant grade unsaturate polysterresinn and chopped mat.Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiberglass from all sides, MS stay shall be provided at the bottom to steady the frame complete all as specified and directedby Engineer - in -Charge |
| 51 | S & F 30mm thick glass fiber reinforced plastic (FRP) paneled door shutter of required colour and approved brand and manufacture made with fire retardent grade unsaturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels for conforming to IS:14856-2000 complete all as specified and directed by Engineer - in -Charge. |
| 52 | S&F 100mm longbutt hinges, heavyweight, cold rolled mildsteelcomplete all as specified and directed by Engineer - in -Charge. |
| 53 | S&F aluminium handle cast type anodised, 150mm long complete all as specified and directed by Engineer - in -Charge. |
| 54 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer - in -Charge. |
| 55 | S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed by Engineer - in -Charge. |
| 56 | S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer - in -Charge. |
| 57 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples completeall as specified and directed by Engineer - in -Charge. |
| 58 | S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer - in -Charge. |
| 59 | S & F for floor door stopper of aluminium alloy body and tongue, Overall length of cover plate 140mm anodised, with hard drawn steel spring, completeall as specified and directed by Engineer - in -Charge. |
| 60 | S&F 4mm sheet glass ordinary quality and glazing with oil putty in squaren. exc 0.5 sqm in each plane completeall as specified and directed by Engineer - in -Charge. |
| 61 | Supply & Fix 4mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in suqares n.exc 0.5 Sqm in each pane complete all as specified and directed by Engineer - in -Charge. |
| 62 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and directed by Engineer - in -Charge. |
| 63 | S&F steel windows with side hung shutters includinghinges with steel handle and steel peg stay, complete with glazing bars, devetailed or weldedcomplete all as specified and directed by Engineer - in -Charge. |
| 64 | S&F steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley, wheelcomplete all as specified and directed by Engineer - in -Charge. |
| 65 | M&L anodised aluminium frames for doors, windows withone or moe rebates including jointing cleats for fixing etc.including power coating minimum thickness of power coating shall be 50 micron as per the specification) complete all as specified and directed by Engineer - in -Charge. (Make :- Jindal or equivalent of Hindalco, Indalco) |
| 66 | S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,powder coated aluminum snap beading screws etc. complete all as specified and directed by Engineer - in -Charge. |
| 67 | S&F powder coated aluminiumwindowsand ventilator shutters,side hung type, without sash bars aluminium saction weighing 0.55 kg/RM including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) complete all as specified and directed by Engineer - in -Charge. |
| 68 | S & F for 5.5mm thick sheet glass(tinted),selected quality and glazing with necessory arrangement in square exc 0.5 sq. m in each panecomplete all as specified and directed by Engineer - in -Charge. |
| 69 | M&L for preparation of old painted woodensurfaces of any description over 10cm in width or girth including preparation of surface as knotting, stopping, burning off or removing, scraping paint from surfaces etc and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-charge. |
| 70 | M&L for preparation of new wooden surfacesover 10cm width or girthand applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and directed by Engineer - in - Charge. |
| 71 | M&L for preparation of old painted steel surfaces by knotting and stopping, Burning off or removing or scraping of paintetc over 10cm width or girthand then applying twocoats of synthetic enamel paint (ordinary tint) complete all as specified and directed by Engineer-in-Charge. |
| 72 | M&L for preparation of new steel surfacesover 10cm width or girthand applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed by Engineer - in -Charge. |
| 73 | Suuply and fix in repairs vitreous china wash hand basin white flat back of size 550mm X 400mm, fixed with a set of cast iron brackets including cutting and pinning in ends of brackets to wall, provision of 15mm size pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter "Hot or cold"" with long scrwed shanks and fly nuts, 32mm dia brass chromium plated waste fittings 450mm long PVC connection of 15mm size with PTMT nuts and 40mm dia waste pipe complete all as specified and directed by Engineer - in -Charge. |
| 74 | S&F in repair vitreous China wash down water closet pan (pedestal pattern), white complete, including white seat cover with hinging arrangement, (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed by Engineer - in -Charge. |
| 75 | Supply & Fixin repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections etc complete all as specified and directed by Engineer - in -Charge. |
| 76 | S&F in repair, 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern(dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket complete all as specified and directed by Engineer - in -Charge. |
| 77 | S&F in repairtoilet paper holdercomplete all as specified and directed by Engineer - in -Charge. |
| 78 | S&F in repairsoap dish, complete all as specified and directed by Engineer - in -Charge. |
| 79 | Supply and fix in repairs stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends Bore of pipe in 20mm. complete all as specified and directed by Engineer - in -Charge. |
| 80 | Supply and fix in repairs stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends Bore of pipe in 25mm.complete all as specified and directed by Engineer - in -Charge. |
| 81 | Supply and fix in repairs stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union complete all as specified and directed by Engineer - in -Charge. prayag cat No-8326,parryware Cat No-T35011A1,CERA Cat No-F33002361. |
| 82 | Supply and fixedpillar tap 15mm dia cast copper alloy with capstan heads, chromium plated screwed down high pressure with long screwed for iron pipe of 15 mm dia, fixed in repairs.complete all as specified and directed by Engineer - in -Charge. Prayag cat No-8304,parryware Cat No-T3501A1,CERA Cat No-F3002101 |
| 83 | Supply and fix in repairs Angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union complete all as specified and directed by Engineer - in -Charge. Make:-prayag cat No-8310,parryware Cat No-T3507A1,CERA Cat No-F3002201. |
| 84 | S&Fin repairs15mm bib taps cast copper alloy, chromium platedfency type with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixed.complete all as specified and directed by Engineer - in -Charge. Make: Prayag cat No-8306,parryware Cat No-T3504A1,CERA Cat No-HTF3001151 |
| 85 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed by Engineer - in -Charge. |
| 86 | S&F PVC gratings 100 mm dia of PTMTfixed in repairs.(Minimumweight25 gms ) complete all as specified and directed by Engineer - in -Charge. |
| 87 | S&F in repair CP shower rose 125mm size and 15mm dia complete all as specified and directed by Engineer - in -Charge. |
| 88 | S&F in repair 32mm dia PVC down take waste pipe for WHB of 75cm long as in repairs complete all as specified and directed by Engineer - in -Charge. |
| 89 | S&F in repair CP towel rail 600mm long fixed with CP brass screws complete all as specified and directed by Engineer - in -Charge. |
| 90 | S&F in repair 600x450 mm bevelled edge mirror of selected qualite glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium platedbrass screws and cup washers complete all as specified and directed by Engineer - in -Charge. |
| 91 | Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all as specified and directed by Engineer - in -Charge. |
| 92 | Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed by Engineer - in -Charge. |
| 93 | S & F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed by Engineer - in -Charge. |
| 94 | Fixing only tubes,of 15mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed by Engineer - in -Charge. |
| 95 | S & F GI steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed by Engineer - in -Charge. |
| 96 | Fixing only tubes,of 20 mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed by Engineer - in -Charge. |
| 97 | Taking down or up steel water tubing 25 mm dia bore of pipeand connections complete all as specified and directed by Engineer - in -Charge. |
| 98 | Fixing old steel tubing and connections in new or old position (walls, ceiling, flooring etc).Bore of pipe in 25 mm. complete all as specified and directed by Engineer - in -Charge. |
| 99 | Supply and fixtubes medium grade steel tubing 25mm dia laid to walls floors etc complete all as specified and directed by Engineer - in -Charge. |
| 100 | Dismantling water tanks any type exc. 250 ltr but nexc 500 ltr complete all as specified and directed by Engineer - in -Charge. |
| 101 | Dismantling water tanks any type exc. 500 ltr but nexc 1000 ltr complete all as specified and directed by Engineer - in -Charge. |
| 102 | S & F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (500 Ltrs) capacity. complete all as specified and directed by Engineer - in -Charge. |
| 103 | S & F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (1000 Ltrs) capacity. complete all as specified and directed by Engineer - in -Charge. |
| 104 | Supply and fixing in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 20mm.complete all as specified and directed by Engineer - in -Charge. |
| 105 | Dismantling of cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches, if required.complete all as specified and directed by Engineer - in -Charge. |
| 106 | .M&L for 100mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed by Engineer - in -Charge. |
| 107 | .M&L for 75mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed by Engineer - in -Charge. |
| 108 | S&F 100mm bore cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge. |
| 109 | S&F 75mm bore cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge. |
| 110 | Taking down eaves gutters and rainwater pipes,PVC (SWR) pipes ( any size or pattern ) including all fittings heads ,shoes, bends,and removal to store.complete all as specified and directed by Engineer - in -Charge. |
| 111 | S&F 110 mmdiaPVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls includingnecessary scaffolding upto the height of buildingfrom ground level complete all as specified and directed by Engineer - in -Charge. |
| 112 | S&F 110 mm dia PVC (SWR) bend with oval access door complete all as specified and directed by Engineer - in -Charge. |
| 113 | S&F in Repair drapery curtain rod, mildsteel, chromium plated 25mm dia fency typewith fixing of decoreted typebrackets,stops, rollers including end knobs etc complete all as specified and directed by Engineer - in -Charge. |
| 114 | welding work in steel windows ventilators, steel cupbords not Exc. 6 mm thick metal complete all as specified and directed by Engineer - in -Charge. |
| 115 | S&F in rep for door closer hydraulically regulated, alunimiunbody designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed by Engineer - in -Charge. |
| 116 | S & F in repair 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer - in -Charge. Make:.Prayag cat No-8550,parryware Cat No-G4636A1,CERA Cat No-F1005501. |
| 117 | S & F in repair stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mmcomplete all as specified and directed by Engineer - in -Charge. |
| 118 | Dismantling steel sheets(corrugated semicorrugated ,Plain or corrugated steel sheeting,any gauge, thickness etc) sheet in roof covering complete all as specified and directed by Engineer - in -Charge. |
| 119 | S&F pre-painted galvalume aluminium zinc coating GI basedcorrugated Mangalore tiles profilesteel sheet 0.50mm thick of ancolour (red)having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer - in -Charge. |
| 120 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 121 | M&L for Pre-painted galvalume aluminum zinc0.56 thick plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed by Engineer-in-charge. |
| 122 | Dismantling Wall and ceiling boards (fibre, pulp, ACinsulation, etc.) or insulationboards/slabs/ blankets, any thickness, including cover fillets & snap grid and any description complete all as specified and directed by Engineer - in -Charge. |
| 123 | S&F for Anodised aluminium snap grid frame work for false ceiling including hangers complete all as specified and directed by Engineer - in -Charge. |
| 124 | M&L for 12mm thick perforated particle Boards or tiles for insulation and accoustic purposes , 60 cm x 60 cm in size laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed by Engineer - in -Charge. |
| 125 | M&L for Second class Clean sawn hard-woodPlain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed.inscantlings and for frame etc, complete all as specified and directed by Engineer - in -Charge. |
| 126 | Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed work. complete all as specified and directed by Engineer - in -Charge. |
| 127 | S&F in repair Prelaminated particle board,19 mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engineer - in -Charge. |
| 128 | S&F in repair for vitreous China urinals,half stall urinal (back or corner wall type), complete includingproviding and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) and including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms). complete all as specified and directed by Engineer - in -Charge. |
| 129 | S&F in repair mortice lock with four lever (vertical type) with brass body 100 mm long complete all as specified and directed by Engineer-in-charge.. |
| 130 | Note : Notes : (i) Amount ofcredit for retrieved materials is mentionedin Sch "A" Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
