Construction Of Toilet Blocks In The Academy Construction Of Toilet Blocks In The Academy
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Nov 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
National Judicial Academy, Bhopal → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Toilet Blocks In The Academy Construction Of Toilet Blocks In The Academy
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 20 mm |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size). |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for all heights Walls (any thickness). |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 6 | Brick work with common burnt clay F.P.S. (non modula):Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Hot rooled defromed bars |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas,lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for all heights Walls (any thickness). |
| 10 | 12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) |
| 11 | Cement concreteflooring1:2:4(1cement:2coarsesand:4graded stone aggregate) |
| 12 | Wall painting with premium acrylic emulsion paint of interior gradehavingVOC content less than 50 grams/ lt. of approved brand and manufacturer, including applying additional coats wherever required to achieve even shade and colour two coats |
| 13 | Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 14 | Providing and fixing factory made panel PVC door shutter 30 mm thick plain PVC door shutters size(6x2.5)ft. consisting of frame made out of MS tubes of 19 gauge thickness and size of 19 mm x 19mm for styles and 15 x 15 mm for top and bottom rails shall have a coat of steel primers of approved make and manufacturer. ( DSR item no. 9.120.1) |
| 15 | Providing and fittingMS grills of required pattern in frames of window etc. Including primer coat with approved steel primer all complete |
| 16 | Providing & fixing water closet Squatting pan White vitreous (Indian type W.C pan)of size 580x440 mm with integral type foot rests along with \"S\" or \"P\" trap, flushing arrangement with manually controlled valve fitted in wall, all complete as per the direction of Engineer-in- charge. |
| 17 | Providing & fixing white vitreous china squatting plate urinal with integral rim longitidunal flush pipe, etc. |
| 18 | Providing and laying Ceramic glazed floor tiles size (300x300) mm of 1stquality conforming to IS 15622 of approved make in colour laid on 20 mm thick cement mortar 1:4 including pointing the joints with white cement & matching pigment etc. complete |
| 19 | Providing and laying wall tiles size (300x300)mm./ 18 mm Granite slab |
| 20 | Providing and fixing CPVC pipes, having thermal stability for hot & cold water supply , including all CPVC plain & brass threaded fittings , including fixing the pipe with clamps/ inside wall & plastercomplete as per directions of engineer-in- charge(25 mm nominal outer dia pipes) |
| 21 | Providing and fixing CPVC pipes, having thermal stability for hot & cold water supply , including all CPVC plain & brass threaded fittings , including fixing the pipe with clamps/ inside wall & plastercomplete as per directions of engineer-in- charge(40 mm nominal outer dia pipes) |
| 22 | Providing & fixing of Fittings in position as per design and directed by the E-in-C ( angle cock -3 no, Bib cock -3 no. Stop cock- 2no. , Pillar cock- 2no. Connection pipe 60 mm- 3 nos. ) All fittings shall be of approved brand & manufacturer and as per IS8931 and other relevant IS codes. Other |
| 23 | Providing and fitting wash basin with CI brackets 15 mm CP brass pillar tap, 32 mm CP brass waste pf standard pattern , including painting of fittings and brackets , cutting and making good the wall wherever require white Vitreous china flat back wash basin size 550 x 400 mm with single 15 mm CP brass pillar tap. |
| 24 | Providing & fixing mirror of superior glass and of rectangular shape 453 x 357 mm with plastic moulded frame of approved make and shade with 6 mm thick hard board backing |
| 25 | Providing & laying cement concrete 1:5:10 out to Haunches of SW pipes/ Good quality PVC pipe including bed concrete as per standard design 150 mm diameter SW pipe/ good quality PVC pipe. (Unplasticised -PVC rigid water pipe conforming to IS:13592 type A, including jointing with seal ring conforming to IS:5382. |
| 26 | Providing & fixing main drainage with 150 mm PVC good quality pipe and making connection of drain or sewer line with existing manhole/ sewer line including breaking into and making good the wall, floors with cement concrete 1:2:4 mix, cement plastering on both sides with cement mortar 1:3 finished with a floating coat of neat to the near by sewer line complete with necessary channels for the drain etc. complete dismantling and civil works essential for the connection. |
| 27 | Steelwork in built up tabular (round, square or rectangular hollow tubes ,etc.) including dutting, hoisting, fixing in position and applying a primeing coat of approved steel primer, including welding and bolting, etc complete. |
| 28 | Applying primering coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work |
| 29 | Painting steel work with deluxe multi surface paint to give an even shade,. Two or more coat applied @ 0.90 ltr/ 10 sqm of approval brand and manufacture |
| 30 | Providing & laying Main power cable 4 core 10 Sqmm aluminium cable armoud cable from near by feeder pillar to the Toilet block including providing and installation of 4 pole MCCB and other safety devices |
| 31 | Electrification work point wiring complete with switch (10 nos)with 1.5 sq.mm and earth wire of 1.5 sq.mm both are of ISI mark 1.1kv grade FRLS PVC insulated multistandard of cooper. all complete as per direction of Engineer- in-charge.supply and Erection of metalic pole of 4.5 to 6.5 meters in cement concrete 1:3:6 foundation including excavation and refilling etc. |
| 32 | Providing & laying 60 mm thick factory made cement concrete interlocking paving block of M-30 grade made by block making machine with strong vibrator compaction, of approved size , design & shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joint with line sand etc, all complete as per the directions of E-in-C |
AI Tender Summary
Tender Timeline
Oct 11, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 01, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 02, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender