|
| 1 | Item no. 01 Engaging minimum one FGm( Semi Skilled category of worker) per shift | Outsourcingfor operation of installation in three shifts of 8 hours per dayfor seven days in a week with one pumphouse operator in each shiftat PH No 5 consisting of following machineries for water supply including operation of all outgoing valves & pipe lines all as directed by the Engr-in-charge.(a) Bore well with submersible of pumping set capacity 15 HP, 415 Volts 50 Hz, Make : KSB-01 No.(b) Booster pump of mono block/centrifugal type with electric motor of cap-15 HP 415 Volts.50HZ - 02 Nos.(c) Liquid Chlorine dozing machine - 1 No. (d) Oxidation chamber with motor operated compressor-01 Nos(e) Oxidation chamber pre-filter, iron removal plant-01 No (f) DG set with electric control panel - 01 No. |
| 2 | Item no. 02Engaging minimum one FGm( Semi Skilled category of worker) per shift | Outsourcing for Operation of Non clog sewage pump electrically driven with motor of cap10HP, 415 Volt, 50Hz Make: Kirloskar - 01 and non clog sewage pump electrically driven with motor of capacity 5 HP, 415 volt, 50 Hz Make : Kirloskar-01 No (for Sewage PH No 2), & Non clog sewage pump electrically driven with motor of capacity 15 HP 415 volt, 50 Hz Make : Kirloskar-02 Nos for (Sewage Pump No 4)intwo shift per day for 8 hrs each shift for seven days in a week with one operator per shift alongwithsewage pumps of under mentioned capacity working (Only One pump runningat a time other remain standby)all as directed by Engr-in-Charge. |
| 3 | Item no. 03Engaging minimum one FGm( Semi Skilled category of worker) per shift | Outsourcing for Operation of Non clog sewage pump electrically driven with motor of capacity 10HP, 415 Volt, 50Hz Make: Kirloskar - 03 Nos installation in sewage Pump House No1inOne shift per day for 8 hrs each shift for seven days in a week working (Only One pump runningat a time other remain standby)all as directed by Engr-in-Charge.Notes applicable for items no. 1 to 4(i) Rate quoted shall be inclusive of all taxes,cess,levies as applicable and GST.(ii) The quoted rate is inclusive of EPF,ESIC as per EPF Act 1952 and ESI Act 1948, as amended from time to time .(iii) The quoted rate should also include superintendence, overheads and profit and including all taxes and insert amount to cover all. (iv) Contribution towards Bonus, ESIC &EPF shall be payable only after submission of valid and authentic document in support of payment by the contractor.. |
| 4 | Item no. 04Engaging minimum three ElectricianSkilled category of worker and three Unskilled worker per shift | Outsourcing day to day maintenance of all internal electric breakdown at SMQ ,OMQ and Tech area of AFS in one shift for 08 hrs each for 06 days in a week with threeelectrician and three unskilledper shiftscomprising of checking, testing, taking out and replaceing of switches, sockets, light fittings, starter, choke, lamp holder, MCBs, isolator, DBs & damaged wiring etc. andmaking serviceable all as directed:-Note:-(i) Fittings and fixtures shall be measured and paid for separately(ii) Electric fittings/fixtures shall also be issued by the department for replacement of diffectives/ fittings free for fixing. (iii) Any type of complaints related to internal electrification shall be attended of against item |
| 5 | Item No. 05 | Disconnections of electric connection of pumping Set, of Non clog cap 10 HP Pump & motor 3 phase 415 volts,lifting and removing motor form its existing foundation to the location (inside/outside of buildings) where directed by the Engr-in-charge. Dismantling the motor carefully, checking. Segregating serviceable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Part like stator, rotor, terminal box, bearings, shaft, key etc) heating,drying and varnishing including replacement of burnt windiwng with super enameled copper wire of existing gauge and good quality of insulating materials including replacement of unservicealbe parts as required (New part shall be measured and paid saperately as supply only Srl No 09 to 17 ) re-assembling the motor installing to its existing foundation, commissioning, connected up and testing complete. |
| 6 | Item No. 06 | All as Srl No 5.00 here-in-before but Non clog og cap 5 HP Motor, 3 Phase, 415 Volt Make: Kirloskar |
| 7 | Item No. 07 | All as Srl No 5.00 here-in-before but Non clog og cap 15 HP Motor, 3 Phase, 415 Volt Make: Kirloskar |
| 8 | Item No.08 | Supply only Ball bearing No 6308 Make: NBC/SKF/TATA |
| 9 | Item No. 09 | Supply onlyBall bearing No 6306 Make; NBC/SKF/TAT |
| 10 | Item No. 10 | Supply onlyShaft Key of Size |
| 11 | Item No. 11 | Supply onlyType coupling bolt/stud of size Make : PBE |
| 12 | Item No. 12 | Supply only Type/ Rubber coupling No PX45 Make: Universal/Unique |
| 13 | Item No. 13 | Supply onlyTyre/rubber coupling type D-60/70/80 Make Dunlop/ Unique |
| 14 | Item No. 14 | Supply onlyTyre coupling flange PX45 or PX50 |
| 15 | Item No. 15 | Supply onlyTyre coupling flange PX60 or PX80 |
| 16 | Item No. 16 | Supply onlyStar coupling as per sample |
| 17 | Item No. 17 | Supply only GI screw bolts (machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washer and one hexagonal or square nut, exc 5cm but not exc 10cm long and dia of neck 15mm to 25mm |
| 18 | Item No. 18 | Supply and fix in repairsvitreous china squatting pan,”Orissa” pattern, size 580mmX440mm, white, with integral foot rests, ‘S’ trap (excluding flushing cistern and flush pipe) and provision of lime concrete bedding including demolition fo existing WC and removal of debris from the site complete all as directed |
| 19 | Item No. 19 | Supply and fix in repair 10 litres capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed |
| 20 | Item No. 20 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) notexceeding 1.5 sqm eachcomplete all as directed |
| 21 | Item No. 21 | Supply and fix for factory made PVC door shutter 30mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and as directed |
| 22 | Item No. 22 | Supply and fixbutt hinges 75mm long cold rolled medium weight complete all as specified and as directed |
| 23 | Item No. 23 | Supply and fix for 150mm long aluminium handles, cast type, anodised complete all as specified and as directed |
| 24 | Item No. 24 | Supply and fix infor 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed |
| 25 | Item No. 25 | Supply and fix infor anodized aluminium frame for window with one or more rebates, anodized aluminium window, sliding type shutters, sliding on two way aluminium channel, without sash bars, sliding on separate track, made out of aluminium section weighing 0.55 Kg/RM and necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, fittings such as suitable anodized aluminium locking type handle etc. and of 4mm thick sheet glass, tinted including taking down the exsting windows complete all as specified and as directed |
| 26 | Item No. 26 | Material & Labour for 75mm thick cement concrete type C2 1:3:6 (40 mm graded aggregate) as in plinth protection including finishing surfaces even and smooth without using extra cement including demoliton of cement concrete (unreinforced) complete all as directed by Engr in charge |
| 27 | Item No. 27 | Material and labour for prepration of old plastered or unplastered surfaces and applying one coat ofoil bound distemper complete all as specified and directed. |
| 28 | Item No. 28 | Supply and fixbutt hinges 100mm long cold rolled medium weight complete all as specified and as directed |
| 29 | Item No. 29 | Supply and fix150mm long mild steel pressed handles, oval type, stove enameled black complete all as specified and as directed |
| 30 | Item No. 30 | S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long all as specified and directed by Engineer - in – Charge |
| 31 | Item No. 31 | S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long all as specified and directed by Engineer - in – Charge |
| 32 | Item No. 32 | Supply and fix in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed |
| 33 | Item No. 33 | Supply and fix in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed |
| 34 | Item No. 34 | Supply and fix in repair for vitreous chinawash basin, white, flat back,size of 550mm x 400mm including cutting for and pinning in ends of bracket or erecting stand and including 32mm dia waste pipe & brackets including waste coupling of size 32/40 ofPTMT complete all as specified and as directed |
| 35 | Item No. 35 | S&F in repair waste pvc pipe 950mm long forkitchen sink/ wash basincomplete all as specified and directed |
| 36 | Item No. 36 | Supply and fix in repair 15mm stop valve/ angular stop cock fancy type chromium plated alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or union complete all as specified and as directed |
| 37 | Item No. 37 | Supply and fix in repair 15mm bore bib taps, chromium plated with CP flange screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed |
| 38 | Item No. 38 | Supply and fix in repair 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with aluminium screws and fixing two nos bracket washers complete all as specified and as directed |
| 39 | Item No. 39 | S & F in repairshower rose 65mm size PTMTswivel jointwith arm any size including fixing to steel pipe or union all as specified and directed Make- Prayag -181 CERA, Essco, parryware and equivalent |
| 40 | Item No. 40 | M&L 10 mm thick cement plaster in CM (1:6) on lath fair faces of brick work incl finished even and smooth without using extra cementincluding taking down cement plaster , raking out joints, hacking for key, scrubbing down with water and preparation of the newly plastered surfaces and applying two coat ofOil bound distemperover a coat of cement primer etc all as specified and directed |
| 41 | Item No. 41 | M&L 15 mm thick cement plaster in CM (1:4) in two layers (5mm thick with approved water proofing compound over backing layer of 10 mm thick )on fair faces of brick work incl finished even and smooth without using extra cement. (WPC @ 2% of cement, will be paid separately ) and preparation of the newly plastered surfaces and applying two coat of cement based paint over a coat ofprimer etc all as specified and directed |
| 42 | Item No. 42 | Material and labour coloured glazed ceramic tiles 450mm x 300 mmx 7 mm thickas in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick plaster in CM(1:3) on brick work for fixing of tile and dismantling the existing tilescomplete all as specified and as directed |
| 43 | Item No. 43 | Material and labour non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (400x400mm) as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed orbedding layer in CM (1:6) for laying floor finishes and dimantling the existing floor tiles complete all as specified and as directed |
| 44 | Item No. 44 | M&L Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc, deposited, spread and levelled in layers n exc 15cm thick, watered and rolled / rammed to a true surface |
| 45 | Item No. 45 | Materials and labour for 100mm thick plain cement concrete (1:4:8) type D2 using 40mm graded aggregates as in path, hard standing complete all as specified and directed |
| 46 | Item No. 46 | Materials and labour for 40mm thick plain cement concrete (1:2:4) type D2 using 40mm graded aggregates as in path, hard standing complete all as specified and directed |
| 47 | Item No. 47 | Supply and fix for PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed |
