Construction Of Boundary Wall, Repair And Renovation Of Veternary Hospital Bela Jamana At Chibe Chak Pyt. Bhalwal Mullo Block Pargwal.
Tender Value
12 Lakhs
Estimated cost
Bid Submission
21 Oct 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pargwal → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Boundary Wall, Repair And Renovation Of Veternary Hospital Bela Jamana At Chibe Chak Pyt. Bhalwal Mullo Block Pargwal.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 2 | Earth work in excavation by manual means in trenches for foundation, drain, pipes, cables etc ( not exceeding 1.5 m in width ) |
| 3 | P/Laying ofcement conct.1:5:10 Of specified gradeexcluding the cost of form work, cement using 40mm N/ size of agg. |
| 4 | P/Laying ofcement conc. 1:3:6Of specified grade with 20% boulder excluding the cost of form work, cement using 20mm N/ size of agg. |
| 5 | SUPPLY OF PLUMS |
| 6 | Providing and laying damp-proof-course 40 mm thick with cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 Nallah stone aggregate 20 mm nominal Size ) |
| 7 | P/L Half Brick Masonary using 1:4 Mix Mortar for Compound Wall |
| 8 | Brick work with brick of class designation 75 in foundation and plinth in cement mortar 1:6 mix |
| 9 | Extra for brick work in superstructure above plinth level upto floor V level |
| 10 | P/Laying ofcement conc. 1:1.5 :3Of specified grade in RCC workexcluding the cost of form work, cement using 20mm N/ size of agg. |
| 11 | Reinforcement for RCC work including straightening , cutting, bending, placing in position and binding all complete |
| 12 | Centeringand shuttering including strutting propping etc and removal ofform forfoundation footings, bases of columns etc for mass concret. |
| 13 | Centeringand shuttering including strutting propping etc and removal ofform for suspended floors, roofs, landing, balconies and access platform |
| 14 | Edges of slabs and breaks in floors and walls under 20 cm wide |
| 15 | 15 mm cement plaster of mix 1:4 fine sand |
| 16 | 12 mm cement plaster of mix 1:4 fine sand |
| 17 | 6mm cement plaster to ceilling of mix 1:3 |
| 18 | Providing and laying vitrified floor tiles 60x60cm sizes ( thickness to be specified by the manufacturer ) with water absorption less then 0.08 % and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 including grouting the joints with white cement and matching pigments etc. complete |
| 19 | P/ Fixing Ist quality ceramic glazed tiles conforming to IS : 13753 of minimum thickness 5 mm of approved making like NITCO, ORIENT, SOMANY, KAJARIA. Or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 and jointing with grey cement slurry @3.3 Kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 20 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer |
| 21 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete and Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. |
| 22 | Finishing Wall with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade |
| 23 | Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) complete |
| 24 | Painting with synthetic enamelpaint of approved brand and manufactureof required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 26 | Making Plinth prot.50 mm thick of cement mortar 1:3:6 stone agg. 20 mm N / size |
| 27 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. |
| 28 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes |
| 29 | Painting top of roofs with bitumen of approved quality at 17 kg per 10sqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. with residual type petroleum bitumen of grade VG-10 |
| 30 | 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick tiles of class designation 10.0 |
| 31 | Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete. (Hot finished welded type tubes) |
| 32 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
AI Tender Summary
Tender Timeline
Oct 11, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 22, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender