Road Safety Work On Ladnun -Sunari -Hirawati-Odient -Nimbijodha Road. Road Safety Work On Ladnun -Sunari -Hirawati-Odient -Nimbijodha Road.
Tender Value
13.74 Lakhs
Estimated cost
Bid Submission
13 Oct 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
DIDWANA → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Road Safety Work On Ladnun -Sunari -Hirawati-Odient -Nimbijodha Road. Road Safety Work On Ladnun -Sunari -Hirawati-Odient -Nimbijodha Road.
BOQ
| Sl. No. | Item Description |
| 1 | PART-A : CIVIL WORK |
| 2 | Earth work in excavation including stacking/ disposal of surplus earth with all lifts and lead upto 1000 meters exclusive of compensation of earth (MoRTH specification Clause 301 to 305). In ordInary soil mechanically by power shovel including mechanical loading and carriage upto 1 km by tipper/dumper |
| 3 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301 to 305_____do___________ with lead 500mtr to 1000 mtr |
| 4 | Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1,400-2 with CBR value not less than 15 To achieve 95% Proctor density |
| 5 | Providing and laying mechanically mixed and vibrated Cement Concrete in foundation upto a depth of 1.5 metres below ground level and 1.50 metres above Ground/Bed level as per MoRTH Specification : Clause 1000 & 1450 P.C.C. 1:3:6 mix with crushed stone aggregate 20 mm nominal size. |
| 6 | Interlocking Concrete Block Pavements Providing and laying of interlocking concrete block pavements having thickness 80mm as per drawing and technical specifications. |
| 7 | Providing and laying Cement concrete for plain/reinforced concrete in open foundation as per drawing and technical specification as per MoRTH Specification : Section 1450, 1450 & 1450 including form workin foundation & plinth upto 1.5 mtr. from ground level.R.C.C. grade M-20 in bed platesupto ground level excluding cost of steel reinforcement but including the cost of centering & shuttering |
| 8 | Providing and laying of hot applied thermo plastic compound inclusive of type-1 reflectorising glass beads as per table 800.9, 800.10 applied in uniform thickness of at least 2.5 mm and spread uniformlywith reflectorising glass beads type-2 in addition @ 250 gm/scm with a road marking machine as per IRC : 35 complete with traffic diversion arrangement as per MoRTH specification clause 803. |
| 9 | Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including allleads and lifts and cost of arrangement of land, cleaning the loose soil, benching for300mm width, laying fresh material in layers not exceeding 250mm and compactingwith plate compactor or power rammer to restore the original alignment levels andslopes complete as per MoRTH specification clause 3002. |
| 10 | Restoration of rain cuts with gravel including all leads and lifts in layer not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels and slopes complete as per MoRTH specification clause 3002. |
| 11 | Providing and fixing of reinforced ferro-cement drain cover designed duly marked oncover with adequate steel reinforce- ment having thickness 75mm to 150 mm, anti corrosive bitumen painted M.S. plate, rim and on M.S. lifting hooks, admixture likeplastisizer bond-improving compound, shrinkage resistant compound, abrasionresistant complete as per approved design etc600 x 800 mm (125 mm thick). |
AI Tender Summary
Tender Timeline
Oct 08, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 14, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender