Construction Of Proposed Warehouse With Peb Structure Near Guru Granth Sahib Bhavan, Nanded
Tender Value
1.36 Crore
Estimated cost
Bid Submission
20 Oct 2021
0 days left
EMD
1.36 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
The Superintendent, Gurudwara Sachkhand Board, → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Proposed Warehouse With Peb Structure Near Guru Granth Sahib Bhavan, Nanded
BOQ
| Sl. No. | Item Description |
| 1 | CONSTRUCTIONOF PROPOSED WAREHOUSE WITH PEB STRUCTURE NEAR GURU GRANTH SAHIB BHAVAN, NANDED |
| 2 | Excavation for foundation in earth,soil of all types,sand,gravel and soft murum,including removing the excavated material upto a distance of 50m.beyond the building area and stacking and spreading as directed,dewatering,preparing the bed for the foundation and necessary back filling,ramming,watering including shoring and strutting etc.complete.(Liftupto 1.5 m.) By Mechanical Means |
| 3 | Providing and laying castinsitu/Ready Mix Cement Concrete M-20 for double rim bored pile of 380mmdia .each of load capacity as per design and of specified diameter of pile and bulb as directed,sunk to the required depth through all strata except rock,excluding provision of rein force mentin cluding placing with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixe/concrete Batch mixplant (Panmixer)etc.complete.With fine aggregate(CrushedsandVSIGrade) by tremie arrangement compaction of concrete including chipping and dressing etc. complete. (Excluding steel reinforcement) |
| 4 | Providing and laying cast in situ / Ready Mix Cement Concrete M-25 of trap metal for R.C.C. Pile Capsas per detailed desigen and drawings,including bailing out water manually, centreing, formwork, laying/ microprocessor based PLC with SCADA enabled reversible Drum type mixer/ concrete Batch mix plant ( pan mixer ) etc. complete.With Natural Sand / V.S.I. quality Artificial Sand complete.( Excluding steel reinforcement ) |
| 5 | Providing and laying cast in situ / Ready Mix Cement Concrete M-10 of trap/ granite/ quartzite/ gneiss metal for fundation and including bailing out water, steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete. with fully automatic micro processor basedPLC with SCADA enabled reversible Drum type mixer/ concrete Batch mix plant ( pan mixer ) etc. complete.With fine aggregate ( Natural Sand / Crushed Sand VSI Grade finely washed etc. ) |
| 6 | Providing and laying cast in situ / Ready Mix Cement Concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/ pumbing, compactionand roughening the surface if special finish is to be provided and curing etc. complete. ( Excluding reinforcement and structural steel ) with fully automatic micro processor basedPLC with SCADA enabled reversible Drum type mixer/ concrete Batch mix plant ( pan mixer ) etc. complete.With fine aggregate ( Natural Sand / Crushed Sand VSI Grade finely washed etc. ) |
| 7 | Providing and laying cast in situ / Ready Mix Cement Concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. columnsas per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/ pumbing, compactionand roughening the surface if special finish is to be provided and curing etc. complete. ( Excluding reinforcement and structural steel ) with fully automatic micro processor basedPLC with SCADA enabled reversible Drum type mixer/ concrete Batch mix plant ( pan mixer ) etc. complete.With fine aggregate ( Natural Sand / Crushed Sand VSI Grade finely washed etc. ) |
| 8 | Providing second class Brunt Brick masonary with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed face, raking out joints on exposed faces and watering etc. complete. |
| 9 | Providing second class Brunt Brick masonary with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure includingstriking joints , raking out joints watering and scaffolding etc. complete. |
| 10 | Filling in plinth and floors with contractors material/brought from outside and approved by engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. compolete. |
| 11 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed Sand/grit., ramming watering etc. complete. |
| 12 | Providing and laying Castin situ/Ready Mix cement concrete in M20 of trap/granite/quartzite/gneiss metal for steps including steel centering,form work,laying/pumping,compacting,roughening them if special finish is to be provided,finishing uneven and honey combed surface and curinge tc.complete.The Cement Mortar1:3 plaster is considered for rendering uneven and honey combed |
| 13 | surface ,only.Newly laid concre teshall be covered by gunny bag,plastic,tarpaulin etc.(Wooden centering will not be allowed.),with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Panmixer)etc.complete.With fine aggregate(Crushed sand VSI Grade) |
| 14 | Providing pre construction alantitermite treatment asperI.S.6313(Part-I)to the soil along the external face of building byp unching hole so f1.2of1.5C.M.diametr eabout 30-60 cm deep at 15cmc/casclose to the wall as possible and to inject 0.5 percent of aldrinorclorophyr if osattherate of7.5 litres per hole and sealingthesame with proper filing and covering 10 years guarantee on bond paper. |
| 15 | Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C.slabs and landing sas per detailed designs and drawings including steel centering,form work,cover blocks,laying/pumping,compaction finishing the formed surfaces with cement mortar1:3 of sufficient minimum thicknes sto give as mooth and even surfac eorr ougheningifs pec ial finishis to be provided and curing etc.complete,(Excluding reinforcement and structural steel).with fully automati cmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 16 | Providing and laying Castin situ/Ready Mix cement concrete in M-25 of trap/quartzite/granite/gneiss metal for R.C.C.Waist slab,and steps of stair cases as per detail eddesig nand drawing so rasdirected including steel centering,plywood/steel form work,steel props,laying/pumping,compaction,finishingun even and honey combed surface with C.M.1:3 of sufficient minimum thickness to give as mooth and even surface or rough eningthe surface if special finish is to be provided and curingetc.complete.(Excludingeinforcement,includingcoverblock).(Newly laid concrete shall be covered by gunny bag,plastic,tarpaulinetc.)with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Panmixer)etc.complete.Withfineaggregate(Crushedsand VSI Grade) |
| 17 | Providing and Laying 20mm thick Layer Brocken glass pieces including Transportation, Loding unloding spreading etc. complete 1.10 kg / sq.ft. |
| 18 | Providing and fixing in position(as per1868/1982)Alluminiums liding window of three track swith fitted invert ical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stailess steel jail with all required screws and nuts etc, complete. With colour Anodising with boxrectangular pipe 95x38.10x0.90 mm at weight 0.637 Kilogram/Runningmetre.with window frame bottom track section92x31.75x1.30mm at weight1.070Kilogram/Runningmetre..Top and side track section92x31.75x1.30mm at weight 0.933Kilogram/Runningmetre.The shutter should be of bearing bottom 40x18x1.25 mm at weight 0.417 Kilogram/Running metre.Inter locking section 40x18x1.10mm at weight 0.469 Kilogram/Running metre.and handle and top section 40x18x1.25mm at weigh to.417Kilogram/Running metre.As per detailed drawing sand as directed by Engineer in charge with all necessary Aluminium sections fixture sand fastening ssuch as roller bearing in ylon casting and self locking catch |
| 19 | Providing internal cement plaster 12mm thickin single coatincement mortar 1:3 with out neeru finish to concrete orbrick surfaces,in all position including scaffolding and curingetc.complete |
| 20 | Providing sand faced plastere xternally incement mortarusing approved screened sand,in all position sincluding base coat of 15mm thick incement mortar1:4using water proofing compound at 1 Kilogram percement bag curing the same for not less than 2day sand keepingth esurface of the base coat rough to receiethe sand faced treatment 6to8 mm thick incement mortar 1:4 finishing the surface by taking out grain sand curing for fourteenday sscaffolding etc.complete. |
| 21 | Providing and applying two coats of water proof cement paint of approve dmanufactureand of approved colour to the plaster ed surfac esincludings caffldingif necessary,cleaning and preparing the surface, watering for two days etc. complete. |
| 22 | Providing and fixing inposition TMT-FE-500 barre inforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels,chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsandschedules.includingcutting,bending,hookingthebars,bindingwithwiresortackweldingand supporting as required complete. |
| 23 | Providingandapplyingprimingcoatonconcrete/masonary/AsbestosCementplasteredsurfacesincludingscaffoldingifnecessary,preparingthesurfacebythoroughlycleaningoil,grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 24 | Providing and fixing mild steel grill work for windows,ventilatorsetc.20Kilogram/SquareMetreas per drawing including fixtures,necessary welding and painting with one coats of anti corrosive paint and two coats of oil painting complete. |
| 25 | Providing and laying Castinsitu/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C.canopy as per detailed design sand drawings including steel centering,formwork,laying/pumping,compactingand rough eningthe surface if special finish is to be provide dandcuringetc.complete(excludingreinforcement).with fully automatic microprocessor based PLC with SCADA enabled reversible DrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete.With fine aggregate(CrushedsandVSIGrade |
| 26 | PEB WORK OF WEAREHOUSE ProvidingDesign,Detailing,fabricatinganderecting PEB Including ( primary steel and secondary steel) ----oxidezincphosphateprimer(2x25microns)&Two shopcoatsatfactoryshallbeofepoxypolyamide basedenamelpaint(2x35microns).Thetouchup painting if required shall be done appropriately after steel erection etc. complete, ( Note- Use codes for Main frame IS 800-2007 , consider chapter 12,for loading IS875-1987, ,Seismicload1893-2002,forprimary membersyieldstressis345Mpaandforsecondary Frames yield should be 250 Mpa. , Purlin and Girths - 550 Mpa.)(please give the details and description andbifiregation of this item rates inclues seprately in pdf) also all the bove peb and desing and details of item which are including with discreaptionand include the rates )also attche sepate pdf file of item. |
| 27 | NOTE : 1) For Item No. 27 Agency advise to consider all the required Item for PEB work during designingof PEB work/Structure ( i.e. right from foundation Bolt at plinth to Ridge Line of Roof ) FoundationBolt, Column, Rafter/Beam, Purling, Roof Sheeting, Wall Sheeting, Grit, Eave Strut, Canopy, PolyCarbonate Sheet, Turbo Ventilator, Rolling Shutter, ( 4.00 mt. x 4.50 mt ), cladding above 2.40 mt.from plinth level, Rain water down take pipe, ridge sheet, Rain water gutter,______etc.2)During the execution of work Agency is Bounded to do / complete the work with all required Items in the Quatated rates / Amount only no any extra payment will be given if Agency says he is not considered the Item while Tendering / Designing Quate the rate of Item No. 27 with all Item Of PEB work. |
AI Tender Summary
Tender Timeline
Oct 07, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 22, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender