Panchayat Raj Department has published coating bituminous asphalting construction of road . Submission Date for this Tender is 25-10-2021. Road Work Tenders in Etah Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5. carted upto 3km |
2 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5. as per detail attached. Pateries |
3 | Construction of granular sub base by providing well grade material spreading in uniform layers with mortor grade on preparedsurface mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desire density MORTH 401 (A) |
4 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying andwatering and compacting to the required density Grading 3 as per Technical Specification 45-63 mm gauge S.B WBM Grading 3By Manual Means MORTH 405 (2) A |
5 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying andwatering and compacting to the required density Grading 3 as per Technical Specification 22.4-53 mm gauge S.B WBM Grading 3By Manual Means MORTH 405(3)A |
6 | Brick on edge pavement on pateries with class 150 brick joint filling with local sand I/C prepration of base |
7 | P/L applying Primer coat with bitumen emulsion on prepration of granular base including cleaning of road surface and spraying primer at the rates of 0.70 kg/sqm |
8 | Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. |
9 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. |
10 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B,as per Technical Specification Clause 510 |
11 | Painting both side raod strips 8 cm with metarialComplete work |
12 | Supply fixing of Ordinery Km Stone |
13 | Supply fixing ofSub Km Stone |
14 | Providing &fixing of 20mm thick black grainite stone patiya |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail