Public Works Department-PWD has published Construction Of Morgue At Hrishyamukh Chc Including Approach Road During The Year 2021-2022. Earthwork, Cc Work, Rcc Work, Brick Work, Wood And Pvc Work, Flooring, Finishing Work Etc. Submission Date for this Tender is 28-10-2021. Road Work Tenders in Hrishyamukh R.D. Block area Tripura. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | SUB-HEAD : EARTH WORK |
2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. a) All kinds of Soil |
3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. - All kinds of soil |
4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. - All kinds of soil |
5 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
6 | SUB-HEAD : CONCRETE WORK |
7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: |
8 | 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size) |
9 | 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size) |
10 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
11 | SUB-HEAD : RCC WORK |
12 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All work upto plinth level: a) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- a) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
14 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete uptoplinth level / Above plinth level. i) Thermo-Mechanically Treated bars of grade Fe-500D or more |
15 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits. i) 50 mm thick |
16 | Centering shuttering including struttings, propping etc. and removal of form work for: |
17 | Foundations, footings, bases for columns etc. for mass concrete with timber plank |
18 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank |
19 | Suspended floors, roofs, landings, balconies and access platform with timber planks |
20 | Weather shade, Chajjas, corbels etc. including edges |
21 | SUB-HEAD : BRICK WORK |
22 | First class brick work in foundation and plinth including cost of all materials as required complete. i) In cement mortar 1:6 (1 cement : 6 fine sand) |
23 | First class brick work in superstructure above plinth level & upto floor-five level including cost of allmaterials as required complete:- i) In cement mortar 1:6 (1 cement : 6 fine sand) |
24 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- i) In cement mortar 1:4 (1 cement : 4 fine sand) |
25 | SUB-HEAD : WOOD & PVC WORK |
26 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position: i) Local Teak Wood |
27 | Providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement : |
28 | Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Charge. i) Gamair Wood a) 35 mm thick shutters |
29 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : i) 300x16 mm |
30 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
31 | 300x10 mm |
32 | 250x10 mm |
33 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
34 | 125 mm |
35 | 100 mm |
36 | Providing and fixing M.S. grills of required patternin frames of windows etc. with M.S. flats, square or round bars etc. all complete. i) Fixed to openings /wooden frames with rawl plugs screws etc. |
37 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast / anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required. |
38 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:- i) Using M.S. angels 40x40x6 mm for diagonal braces |
39 | SUB-HEAD : FLOORING WORK |
40 | Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc. complete. a) Mat Finish Tiles i) Ceramic 1st quality 300 x 300mm in all shades and designs |
41 | Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
42 | Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning complete as per direction of the Engineer-in- Charge. |
43 | SUB-HEAD : FINISHING WORK |
44 | 12 mm cement plaster of mix a) cement mortar 1:4 (1 cement : 4 fine sand) |
45 | 15 mm cement plaster on the rough side of single or half brick wall of mix: a) cement mortar 1:6 (1 cement : 6 fine sand) |
46 | 6 mm cement plaster of mix a) cement mortar 1:3 (1 cement : 3 fine sand) |
47 | Neat cement punning |
48 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : a) New work ( two or more coats) over and including water thinnable priming coat with cement primer |
49 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : |
50 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : |
51 | With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ). |
52 | With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood |
53 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: i) Two or more coats on new work |
54 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good thewalls wherever require : i) White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
55 | Providing and fixing on wall face unplasticised Rigid PVC rain water, soil, waste & vent pipes (working pressure 6 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: i) Single socketed pipe - 110 mm OD a) 110 mm |
56 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
57 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms. |
58 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. i) Flexible pipe a) 32 mm dia |
59 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type-A includingjointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: |
60 | Coupler i) 110 mm |
61 | Bend 87.5° i) 110mm |
62 | Providing and fixing unplasticised -PVC pipe clips ofapproved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required lengthincluding cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete. i) 110 mm |
63 | SUB-HEAD : WATER SUPPLY |
64 | ProvidingandfixingChlorinatedPolyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction ofEngineer in Charge. Internal work-Exposed on wall |
65 | 15 mm nominal outer dia Pipes |
66 | 20 mm nominal outer dia Pipes |
67 | ProvidingandfixingChlorinatedPolyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work |
68 | 20 mm nominal outer dia Pipes |
69 | 25 mm nominal outer dia Pipes |
70 | 40 mm nominal outer dia Pipes |
71 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
72 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. a) 15 mm nominal bore |
73 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. i) 15 mm nominal bore. |
74 | Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats complete |
75 | 15 mm nominal bore |
76 | 20 mm nominal bore |
77 | SUB-HEAD :SEWAGE AND DRAINAGE WORKS |
78 | Constructing soak pit 1.20 x 1.20 x 1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. |
79 | SUB-HEAD :FOR APPROACH ROAD |
80 | Constrution of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading , grading to required slope and compacted to meet requirement of Table 300.2 as per MoRD Technical Specification Clause 303.1 |
81 | Flat Brick Soling Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412. |
82 | Brick edging laid length wise Providing and laying brick edging laid lengthwise on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412. |
83 | Providing and placing gunny / polythene (of minimum wall thickness of 500 micron) bags filled with sand (of minimum qty of 0.034 cum) and properly manually stitched to avoid any leakage of sand as per specification. |
84 | Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD Technical Specification Clause 301.5. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail