Estimate For The Cost Of Road Re Tarring Of Vanasree Compound Of Divisional Forest Office At Vidyanagar In Kasargod Road Work
Tender Value
5.34 Lakhs
Estimated cost
Bid Submission
23 Oct 2021
0 days left
EMD
8100
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
vidyanagar → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Estimate For The Cost Of Road Re Tarring Of Vanasree Compound Of Divisional Forest Office At Vidyanagar In Kasargod Road Work
BOQ
| Sl. No. | Item Description |
| 1 | 5.5.B.2aModified Penetration Macadam 75 mm thick using Bitumen S-65Construction of penetration macadam over prepared base by providing a layer of compacted crushedcoarse aggregate using chips spreader with alternate applications of bituminous binder and keyaggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree ofcompaction as per Technical Specification Clause 506.(B)75 mm thick:-(II)Bitumen (S-65) |
| 2 | 4.9Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specificationincluding premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixedmaterial by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-baseand compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density includinglighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and TechnicalSpecification Clause 406.By Mechanical Means with 1 km lead |
| 3 | 5.1.2aPrime CoatMedium porosity :- Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surfaceof granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqmusing mechanical means as per Technical Specification Clause 502. |
| 4 | 5.2.1aTack CoatProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as perTechnical Specification Clause 503. |
| 5 | 5.2.2aTack CoatProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulicbroom as per Technical Specification Clause 503. |
| 6 | 5.9.1.2a20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder -Bitumen S-65Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and levelto serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying androlling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to befollowed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.Case - I By Manual Means(II)Bitumen (S-65) |
| 7 | 5.12.A.3.2aSeal Coat - Manual Means - Type C - Bitumen S-65Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, gradeand cross fall using Type A, Type B and Type C as per Technical Specification Clause 510A.By Manual Means:-Case - III : Type C(II)Bitumen (S-65) |
| 8 | 3.5.2Excavation in Soil with Dozer with lead upto 100 mExcavation for roadway in soil by mechanical means including cutting and pushing the earth to site ofembankment upto a distance of 100 m, including trimming bottom and side slopes in accordance withrequirements of lines, grades and cross-sections. |
| 9 | 11.4.1.1Providing concrete for plain/reinforced concrete in open foundations complete as per drawings andtechnical specifications Clause 802, 803, 1202 & 1203I.P.C.C grade M 10(i)Nominal mix 1:3:6 |
| 10 | 11.4.2.2Providing concrete for plain/reinforced concrete in open foundations complete as per drawings andtechnical specifications Clause 802, 803, 1202 & 1203II.P.C.C grade M 15(ii)Nominal mix 1:2.5:5 (Hand mixing) |
| 11 | 75.8.1.1.AProviding Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 courseaggregate) laid to required slope as required including compaction, finishingand tamping etc .complete.Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as perspecification(i) Nominal mix (1:2:4) |
| 12 | 11.4.4Providing concrete for plain/reinforced concrete in open foundations complete as per drawings andtechnical specifications Clause 802, 803, 1202 & 1203IV.R.C.C grade M 20 |
| 13 | 12.7Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawingsand technical specification Clauses 1002, 1005, 1010 & 1202 |
AI Tender Summary
Tender Timeline
Oct 08, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 27, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender