Military Engineer Services-MES has published Repairs To Flooring And Certain Misc B / R Works At Gorkha Hill Under Age B / R I At Ge Dssc Wellington. Repairs To Flooring And Certain Misc B / R Works At Gorkha Hill Under Age B / R I At Ge Dssc Wellington.. Submission Date for this Tender is 28-10-2021. Flooring Work Tenders in WELLINGTON Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Oct-2021 | AMENDMENT TO TENDER DOCUMENTS 8202 | Technical Bid | 28-10-2021 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed. |
| 2 | M & L for non skid coloured ceramic tiles 7mm thick, area of each tiles exc 0.06 Sqm but n.exc 0.11 Sqm in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed. Note : Screed bed shall be measured and paid separately. |
| 3 | M & L for non skid coloured ceramic tiles 7mm thick areaof each tiles exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc., set and jointed inneat cement slurry and pointed in coloured cement to match complete all as specified and as directed. Note : Screed bed shall be measured and paid separately. |
| 4 | M & L for glazed ceramic colouredtiles in vertical surfaces such as skirting, dados and risers to steps etc., of size 350 x 250 x 7mm/ 450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Note : Screed bed shall be measured and paid separately. |
| 5 | M & Lforvitrified coloured tiles, light shade of size 600 x 600 x8 to 10 mm thick, as in flooring set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed. |
| 6 | M & L for rendering 10mm thick in CM (1:4) on fair faces of brick /stone or concretesurfaces for backing of dado /skirtingall as specified and as directed. |
| 7 | M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6) all as specified and as directed. |
| 8 | Demolition of cement concrete (unreinforced ) of any description and in any postion not otherwise specifically provided etc. exc 15cm thickness above ground floor and removing debris from site complete all as specified and as directed. |
| 9 | M & L for laying 20mm thick CM (1:3) mixed with liquid water proofing compound FOSROC"s complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC"s Nito bond AR cement slurry for roof slab/ floor complete all as specified and as directed. Note : Liquid water proofing compound shall be measured and paid separately. |
| 10 | M & L for cleaning the surface of sunken floor portion of WC, Bathroom etc., with wire brush, washing with hydrochloric acid to remove dust, dirt, oil, grease, loose particles etc., and providing water proofing treatment to sunken floor by applying first layer ofslurry of cement @0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitious (PMC) composite compound @ 0.253 Kg/Sqm and second layer of slurry of cement 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.126 Kg /Sqm etc., complete all as specified and as directed. |
| 11 | M & L for filling sunken floor with broken brick aggregates of gauge 40 mm to 80mm gradebrickcomplete all as specified and as directed. |
| 12 | M & L for providing PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) 100 mm thick as in sub base to floor complete all as specified and as directed. |
| 13 | Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removing unserviceable debris off the premises all as specified and as directed. |
| 14 | M & L for hard core of broken stone or boulders n.exc 63 mm deposited, spread and levelled in layers n.exc 15cm thick, water and rammed to a true surface complete all as specified and as directed. |
| 15 | M & L for providing 75mm thick cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as plinth protection /pavings finished even and smooth without using extra cement complete all as specified and as directed. |
| 16 | Demolition of brick tiles or terracing tiles, single layer on roofsincluding removal of existing water proofing treatment of any description and removal of debris to out side MD land complete all as specified and as directed. |
| 17 | Dismantling of single layer Mangalore pattern or similar tiles bedded in cement mortar in roofing complete all as specified and as directed. |
| 18 | M & L for providing 40mm (avg thick) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) mixed with liquid WPC as per manufacturer"s instructionas in padding concrete for roof treatment, floor/chajjas etc., finished even and fair all as specified and as directed. Note : Liquid WPC shall be measured and paid separately. |
| 19 | M & L for laying 10mm thick CM (1:3) mixed with liquid water proofing compound FOSROC"s complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC"s Nito bond AR cement slurry for roof slab/ floor complete all as specified and as directed. Note : Liquid water proofing compound shall be measured and paid separately. |
| 20 | M & L for providing and laying 3mm thick APP modified water proofing memebarane weighing not less than 3.6 Kg/ Sqm reinforced with non woven polyester matt weighing not less than 100 gm per Sqm having softening point not less than 140º centigrade, longitudinal tensile strength not less than 300 N/Sqm, including minimumover lapping 10cm on either side and 15cm on ends and applying a coat ofbitumen primer @ of 0.20 Kg/Sqm and finishing with bituminious aluminium paint applied @ 0.10 Kg / Sqm and finished all as per manufacture"s instruction and as directed. Note: The work shall be carried out by authorised applicators of manufacturer. |
| 21 | Dismantlingwatertanks of capacity exc250 litres & n. exc 500 litres and accounted under schedule of credit all as specified and as directed. |
| 22 | Dismantlingwatertanks of capacity exc500 litres & n. exc 1000 litres and accounted under schedule of credit all as specified and as directed. |
| 23 | Dismantling existing tanks exc. 250 litres & n. exc. 500 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. |
| 24 | Dismantling existing tanks exc. 500 litres & n. exc. 1000 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in positioncomplete all as specified and as directed. |
| 25 | S & F rotational moulded triple layered polyethylene water storage tanks 500 litres capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified and as directed. |
| 26 | S & Frotational moulded triple layered polyethylene water storage tanks 1000 litres capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified and as directed. |
| 27 | S & F 25mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 28 | S & F 25mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 29 | Description all as per Item No 28 abovebut 20mm bore complete all as specified and as directed. |
| 30 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed. |
| 31 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed. |
| 32 | Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed. |
| 33 | Refixing of 15mm bore old GI steel tubesand connectionsin new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed. |
| 34 | Refixing of 20mm bore old GI steel tubesand connectionsin new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed. |
| 35 | Refixing of 25mm bore old GI steel tubesand connectionsin new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed. |
| 36 | S & F 15mm bore steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors completeall as specified and as directed. |
| 37 | S & F 20mm bore steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors completeall as specified and as directed. |
| 38 | S & F 25mm bore steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors completeall as specified and as directed. |
| 39 | S & F in repairs, vitreous china water closet squatting pan orissa pattern of size 630 x 450 mm, with integral foot rests, colour white and P-trap including connections to drain(or outgoing pipe), lime concrete bedding complete all as specified and as directed. Make : Johnson, Model - Pearl Orissa Pan, Cat No :P0360PW OP23 or equivalent in Prayag/ Parryware/Hindware |
| 40 | S & F in repairs PVC valveless, syphonic action type, 10 Ltr capacity,flushing cistern low/high level, white with inlet, ball valve, float and handle including brackets and connections and including taking down complete all as specified and as directed. Make : Johnson Ultima Single Flush - P2827PW or equivalent in Hindware/Cera /Parryware /Prayag |
| 41 | S & F vitreous china wash basin of size 450 x 300 including cutting for and pinning in ends of brackets or erecting stand, inclusive of fixing of supply and waste pipe 32 mm bore, bottle trap, 15 mm bore pillar tap, 450 mm long PVC connections with PTMT unions, etc complete all as specified and as directed. |
| 42 | S & F in repairs 40mm borelow density polyethelene pipes (LDFE) of pressure rating 6 Kg/Sqm fixed complete to walls all as specified and as directed. |
| 43 | S & F in repairs 15mm bore bib taps cast copper alloy fancy type screwed for iron pipes chromiuim plated all as specified and as directed. |
| 44 | S & F in repairs 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed. |
| 45 | S & F in repairs 15mm bore stop cock, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 46 | S & F in repairs Overhead Shower 100mm dia round shape, ABS Body chrome plated with grey face plate, single flow, withrubit cleaning system as per Make : Jaquar, Cat No : OHS-1989 or equivalent in Prayag/ Cera/ Parryware/ Hindware with shower arm 190mm Long as per Make : Jaquar, Cat No : SHA-477 orequivalent in Prayag/ Cera/ Parryware/ Hindware connected to 15mm bore pipe etc., complete fixed all as specified and as directed. |
| 47 | S & F in repairs towel rail 600mm long complete all as specified and as directed. |
| 48 | S & F in repairs 5.50mm thick looking mirror of size 600 x 450mm on 6mm thick Plywood backing (AC sheet backing including framing with first class hard wood of size 40 x 40mm decorative type polished complete all as specified and as directed. |
| 49 | S & F in repairs PVC flexible waste pipe 32 mm dia complete all as specified and as directed. |
| 50 | S & F in repairs PVC flexible waste pipe 40 mm dia complete all as specified and as directed. |
| 51 | S & F in repairs PVC conection 15mm size with PTMT nuts of length 450mm long complete all as specified and as directed. |
| 52 | Taking down eaves gutters & rainwater pipes (any size or pattern), including all fittings, heads, sheos, bends, swan-necks, etc., including cleaning or refixing or accounted under schedule of credit (measured overall as fixed along the center line over fittings & accessories) all as specified and as directed. |
| 53 | S & F 110mm bore PVC (SWR) pipe, double socketed in any length with rubber ring joints, type "B", laid in trenches or in floors all as specified and as directed. |
| 54 | S & F 75mm bore PVC (SWR) pipe, type "B",single socketed in any length with ring jointsfixed to walls with connecting accessories all as specified and as directed. |
| 55 | S & F in repairs PVC floor trap with grating including jointing with solvent cement 75 mm outlet complete all as specified and as directed. |
| 56 | S & F in repairs for removal of old PVC/cast iron floor trap incl wall crossing pipe and fixed with new outlet 75mm PVC (SWR) floor trap with stainless steel grating and new wall crossing and filling with PCC (1:2:4) mixed with water proofing compound including matching with existing tile and joining with outer pipe line with solvent cement all as specified and directed. |
| 57 | S & F in repairs PTMT grating 100 mm dia outlet complete all as specified and as directed. |
| 58 | S & F in repairs PTMT grating 125 mm dia with waste hole outlet complete all as specified and as directed. |
| 59 | S & F PVC (SWR) bends 110 mm bore complete all as specified and as directed. |
| 60 | S & F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal all as specified and as directed. |
| 61 | S & F 110mm bore PVC (SWR) branch piece,double (double Y) equal or unequal all as specified and as directed. |
| 62 | Description all as per Item No 59 above but with access door complete all as specified and as directed. |
| 63 | Description all as per Item No 59 above but 75 mm bore complete all as specified and as directed. |
| 64 | S & F 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal all as specified and as directed. |
| 65 | S & F 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal all as specified and as directed. |
| 66 | S & F PVC (SWR) bends 75 mm bore with access door complete all as specified and as directed. |
| 67 | S & F 110mm bore PVC (SWR) junction double, (double T), equal or unequal complete all as specified and as directed. |
| 68 | S & F 75mm borePVC(SWR) reducer all as specified and as directed. |
| 69 | S & F 75mm borePVC(SWR) vent cowl all as specified and as directed. |
| 70 | S & F in repairs Nipple suitable for HDPE water tank 20mm dia (Minimum weight 45gms) complete all as specified and as directed. |
| 71 | Description all as per Item No 70 above but 25 mm (Minimum weight 65gms) complete all as specified and as directed. |
| 72 | Demolition of brick work / pre cast concrete article / stone masonry built in cement mortar and removing unserviceable debris off the premises all as specified and as directed. |
| 73 | M & L for Precast cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) block masonrywith solidblocks, exc 10 cm in width and set in cement mortar (1:6) complete all as specified and directed. |
| 74 | M & L for providing precast cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in CM (1:6), complete, in walls all as specified and as directed. |
| 75 | M & Lforuse and waste of timber as in formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for rough finished surfaces of concrete flat all as specified and as directed. |
| 76 | M & L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed. |
| 77 | M & L for mild steel TMT bars,10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with mild steel wire (anealed) not less than 0.9mm dia or securing with clips all as specified and as directed. |
| 78 | M & L for use and waste of timber as in formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces of concrete flat all as specified and as directed. |
| 79 | M & L for RCC (1:2:4) (Nominal Mix) type B-1 (using 20 mm graded stone aggregate) as in beams and columns in floors roofs, landing, balconies, canopies,deck slab and in shelves and likecomplete as specified and as directed. |
| 80 | M & L for 10 mm thick rendering in CM (1:6) on stone masonry or other than fair faces of brick work surfaces of wall, finished even and smooth with out using extra cement complete all as specified and as directed. |
| 81 | M & L for 20 mm thick rendering in CM (1:4) mixed with liquid WPC as per manufacturer"s instruction on stone masonry surfaces of wall, finished even and smooth with out using extra cementcomplete all as specified and as directed. Note: Liquid WPC shall be measured and paid separately. |
| 82 | M & L for 15 mm thick rendering in CM (1:4) mixed with liquid WPC as per manufacturer"s instruction on brick work surfaces of wall, finished even and smooth with out using extra cementcomplete all as specified and as directed. Note: WPC shall be measured and paid seperately. |
| 83 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 84 | M & L for rendering 5mm thick in CM (1:3) to soffit of RCC slab & ceiling , etc., finished even & fair without using extra cement complete all as specified and as directed. |
| 85 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable debris off the premises complete all as specified and as directed. |
| 86 | M & L for preparing newly plastered surfaces on external walls and applying two coats of cement base paint over one coat ofchalk whiting surfacecomplete all as per manufacturer;s instruction and as directed. |
| 87 | M & L for preparation of new surfaces of plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 88 | M & L for preparation of new surfaces of plastered surfaces of wall and applying two coats of white wash on ceiling complete all as specified and as directed. |
| 89 | M & L for preparation of new surfaces of walls and applying with whiteputty and making the surface to an even & smooth finish, rubbing with sand paper of different grade etc andapplying two coats ofOil bounddistermper over a coat of primer to be applied by approved applicator of the manufacturer of the paint complete all as specified and as directed. |
| 90 | Dismantling of boarding, any descreption, fixed in any position with nails all as specified and directed. |
| 91 | S & F18/19mm thick particle board, exterior grade prelaminated on both sides with decorative choice lamination, fixed with nails/ screw screws to timber frame work including liping work teak wood beading 6mm thick comple all as specified and directed. |
| 92 | S & F Continuous (Piano) hinges brass, bright finish width of flaps 40mm complete all as specified and as directed. |
| 93 | S & F brass knobs 35-40mm dia complete all as specified and directed. |
| 94 | S & F in repairsbrass knobs 35-40mm dia complete all as specified and directed. |
| 95 | Taking down Chowkats or frames n.exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified anddirected. |
| 96 | Taking down Chowkats or frames exc 1.5 Sqm butn.exc 4 Sqm each (without taking off shutters from the frames) complete all as specified anddirected. |
| 97 | Taking down shutters of any description n.exc 1 Sqm each complete all as specified and as directed. |
| 98 | Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and as directed. |
| 99 | S & F second class hard wood clean and sawn plain, solid, straight as in chowkat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified anddirected. |
| 100 | S & F second class hard woodplain, framed, panelled door shutters 30 mm thick(any number of panels), with lock rail and panels 12mm thick veneered particle board with commercial veneered on both faces.The size of rail and stiles as per IS 1003 (Pt-I), kiln seasoned and chemically pressure treated etc complete all as specified and as directed. |
| 101 | S & F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed. |
| 102 | M & L forPCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in bands, plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed. |
| 103 | S & F for second class hard wood glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc., (without sash bars) edges offraming plain, chamfered or rounded, fitted with cut &mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-ISection-8,clause 8.23 (a) for door shutter supplying and fitted to chowkats, complete all as specified and as directed. |
| 104 | S & F for 30mm thick second class hard woodglazed and skeleton door shutters, open rebated and prepared to received glass, gauge etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut &mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-ISection-8,clause 8.23 (b) for door shutter supplying and fitted to chowkats, complete all as specified and as directed. |
| 105 | S & F solid PVC door frame of size 50mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be painted to match with prelam sheet complete as specified and as directed. |
| 106 | S & F factory made solid PVC moulded door dhutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick moulded prelam PVC sheet on the front face & 2mm PVC sheet on back face with wood free EPS complete as specified and as directed. Make : Sintex or equivalent in Rajashri Plastiwood /Poly windows /Dura Plast extruction |
| 107 | S & F 100mm size Stainless steel butt hinges, fixed with stainless steel hinge pin complete as specified and as directed. |
| 108 | S & F 150 mm long, PVC Bow handle complete all as specified and as directed. |
| 109 | S & F 100mm long, PVC tower bolt complete as specified and as directed. |
| 110 | S & F for MS work as in hold fast etc confirming (Fe-410-0 or Fe-310-0) complete all as specified and as directed. |
| 111 | M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregates) as in hold fast, PCC bed blocks in finished all exposed surfaces of concrete including necessary form work complete all as specified and as directed. |
| 112 | S & F 100mm long MS Butt hinges medium weight cold rolled & fixed complete all as specified and as directed. |
| 113 | S & F in repairs 100mm long MS Butt hinges medium weight cold rolled & fixed complete all as specified and as directed. |
| 114 | S & F 75mm long MS Butt hinges medium weight cold rolled & fixed complete all as specified and as directed. |
| 115 | S & F in repairs 75mm long MS Butt hinges medium weight cold rolled & fixed complete all as specified and as directed. |
| 116 | S & F 200mm longAluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 117 | S & F in repairs 200mm long Aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 118 | S & F 75mm long Aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 119 | S & F in repairs 75mm long Aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 120 | S & F 150mm long Aluminium anodized handles cast type complete all as specified and as directed. |
| 121 | S & F in repairs 150mm long Aluminium anodized handles cast type complete all as specified and as directed. |
| 122 | S & F Aluminium alloy anodized sliding door bolt with hasp and staple of size 300mm long. |
| 123 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed. |
| 124 | S & F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 125 | S & F in repairs 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete as specified and as directed. |
| 126 | S & F in repairs 75mmHasp and staple type, alluminium anodised including bolt to hinge plate and fxed with screwscomplete as specified and as directed. |
| 127 | M & L for Extra over rates of block board or veneered particle board for external teak wood lipping 6 mm thick complete all as specified and as directed. |
| 128 | S & F 20 mm bore dia aluminium anodised tubular towel rail, curtain rod etc., all as specified and as directed. |
| 129 | S & F in repairs Harrison rails mild steel, chromium plated with fixing brackets complete all as specified and as directed. |
| 130 | S & F in repairs Galvanized mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned stacks, or galvanized wire staples taking down existing wire cloth complete all as specified and as directed. |
| 131 | S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading all as specified and as directed. |
| 132 | S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed. |
| 133 | M & L for hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or beads all as specified and as directed. |
| 134 | S & F 4mm thick sheet glass, ordinary quaility and glazing with oil putty in square but exc 0.5 Sqm in each pane all as specified and as directed. |
| 135 | S & F 4mm thick pin headed figured glass, ordinary quaility and glazing with oil putty in square n.exc 0.5 Sqm in each pane all as specified and as directed. |
| 136 | S & F 4mm thick pin headed figured sheet glass, ordinary quaility and glazing with oil putty in square but exc 0.5 Sqm in each pane all as specified and as directed. |
| 137 | M & L for preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromeprimer, complete all as specified and directed. |
| 138 | Removal of bushes , shurbs and vegetation by top of the roofand surface of bldg all as specified and directed. |
| 139 | Dismantling of wrought iron (or) mild steel work , including barbed wires, bolts, 10mm dia rods etc.., complete all as specified and as directed. |
| 140 | S & F for mild rolled steel work as in Joist, channel, angle ot tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W (gde-E-250) quality-A complete all as specified and as directed. |
| 141 | M & L for welding in repairs n. exc 2.5cm in length n.exc 6mm complete all as specified and as directed. |
| 142 | S & F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverings fixed with self tapping screws complete all as specified and as directed. |
| 143 | M & L for preparing old surfaces on external walls and applying one coat of cement based paint complete all as per manufacturer"s instruction and as directed. |
| 144 | M & L for preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of white wash on wall complete all as specified and as directed. |
| 145 | Description all as per item No 144 but on ceiling complete all as specified and as directed. |
| 146 | M & L for applying one coat of acrylic distempter on old treated surfaces of any walls including preparation of surface by washing, rubbing down and stooping of distempered surfaces all as specified and as directed. |
| 147 | M & L for preparing old steel surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth including necessary preparation of surface all as specified and as directed. |
| 148 | M & L for prepartion of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed. |
| 149 | M & L for preparing old wood surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
