|
| 1 | Cotton waste (Good Quality) |
| 2 | Markin Cloth (Good Quality) |
| 3 | Cumi make Grinding wheel, AG-4,Size : 100mmx5mx16mm |
| 4 | Cumi make Grinding wheel, AG-5, Size : 125mmx5mmx22mm |
| 5 | Cumi make Cutoff wheel, Size : 100mm x3mmx16mm |
| 6 | Cumi make Cutoff wheel, Size : 125mm x3mmx22mm |
| 7 | WhiteGoggles |
| 8 | Welding Hand sleeve (set consisting of left & right) |
| 9 | Dust Proof mask |
| 10 | Oil Stone |
| 11 | Belzona 1111 |
| 12 | Binding Wire(GI), 1mm |
| 13 | Emery Cloth grade : 120 |
| 14 | Emery Cloth grade : 240 |
| 15 | Emery Cloth Grade : 400 |
| 16 | Emery Cloth Grade : 600 |
| 17 | Wire Brush |
| 18 | Anabond 666T (1PKT=100 gm) |
| 19 | Miranda make Hacksaw Blade, Size :300mmx12.5mmx0.63mm |
| 20 | Miranda make Hacksaw Blade, Size : 12\" x 1\" |
| 21 | Plastic Tarpaulin, Size : 12\" x 12\" |
| 22 | Feeler gauge, Size : 300mm, Range :0.02mm. |
| 23 | Feeler gauge, Size : 300mm, Range :0.03mm. |
| 24 | Feeler gauge, Size : 300mm, Range :0.05mm. |
| 25 | Feeler gauge, Size : 300mm, Range :0.07mm. |
| 26 | Feeler gauge, Size : 300mm, Range :0.09mm. |
| 27 | Feeler gauge, Size : 300mm, Range :0.10mm. |
| 28 | Feeler gauge, Size : 300mm, Range :0.15mm. |
| 29 | Feeler gauge, Size : 300mm, Range :0.20mm. |
| 30 | Nomex Paper, Size: 0.25x900x1000 |
| 31 | Rain Coat, Single (Large size), Duckback |
| 32 | Rain Coat, two piece (Large size) Duckback |
| 33 | Grease Moly Kote (G-n Plus Paste) |
| 34 | Gas Cutting Nozzle, Size : A1/16 |
| 35 | Steel Funnel, Smallsize. |
| 36 | Steel Funnel, Big Size |
| 37 | Plastic Tray, Size : 2ft x 3ft. (Good Quality) |
| 38 | Painting Brush, Size : 25mm |
| 39 | Painting Brush, Size : 50mm |
| 40 | Painting Brush, Size : 75mm |
| 41 | Painting Brush, Size : 100mm |
| 42 | M. Seal (100grm. Pkt) |
| 43 | Totem Thread Tap set, Size : 10mm |
| 44 | Totem Thread Tap set, Size : 16mm |
| 45 | Totem Thread Tap set, Size : 56mm |
| 46 | Straight Shank Twist drill bit, Size : 3mm |
| 47 | Straight Shank Twist drill bit, Size : 4 mm |
| 48 | Straight Shank Twist drill bit, Size : 5 mm |
| 49 | Straight Shank Twist drill bit, Size : 6 mm |
| 50 | Straight Shank Twist drill bit, Size : 6.50 mm |
| 51 | Straight Shank Twist drill bit, Size : 8.50 mm |
| 52 | Straight Shank Twist drill bit, Size : 10.50 mm |
| 53 | Locktite 495 instant adhesive |
| 54 | Needle file set (set of 12 nos) |
| 55 | Rustolene (Rust remover) |
| 56 | Taflon Tape, Size : ½\" |
| 57 | Taflon Tape, Size : 1\" |
| 58 | Taflon Washer, size : ¾\" |
| 59 | Taflon Washer, size :½\" |
| 60 | Taflon Washer, size1\" |
| 61 | Tube cleaning brush, size : small (As per sample) |
| 62 | Tube cleaning brush, size : big (As per sample) |
| 63 | Colgate Powder (100 gm) |
| 64 | S.S. Shim, size : 0.03 thick x 550mm width |
| 65 | S.S. Shim, size : 0.06 thick x 550mm width |
| 66 | S.S. Shim, size : 0.20 thick x 550mm width |
| 67 | S.S. Shim, size : 0.25 thick x 550mm width |
| 68 | S.S. Shim, size : 0.30 thick x 550mm width |
| 69 | Pin type anchor bolt with nut and washer, size: 8mm |
| 70 | Pin type anchor bolt with nut and washer, size: 10mm |
| 71 | Pin type anchor bolt with nut and washer, size: 12mm |
| 72 | Laying of 4C X10 mm Al Armoured cable including glanding & Termination |
