}

C / O 352 Multistoried Two Bedroom Apartments Adjoining Pocket-3, Sector-19B, Dwarka, Ph-Ii. P / F Ms Tube Frame Structure With Reinforced Plastic Sheet For Covering Of Ramp In 352 Housing, Sector-19B, Dwarka Ph-Ii., EE/ DPD-4-Delhi

Delhi Development Authority-DDA has published C / O 352 Multistoried Two Bedroom Apartments Adjoining Pocket-3, Sector-19B, Dwarka, Ph-Ii. P / F Ms Tube Frame Structure With Reinforced Plastic Sheet For Covering Of Ramp In 352 Housing, Sector-19B, Dwarka Ph-Ii.. Submission Date for this Tender is 12-10-2021. MS Pipe Tenders in EE/ DPD-4 Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

29464696
C / O 352 Multistoried Two Bedroom Apartments Adjoining Pocket-3, Sector-19B, Dwarka, Ph-Ii. P / F Ms Tube Frame Structure With Reinforced Plastic Sheet For Covering Of Ramp In 352 Housing, Sector-19B, Dwarka Ph-Ii.
Open Tender
Indian
Delhi
EE/ DPD-4
12-10-2021

Tender Details

C / O 352 Multistoried Two Bedroom Apartments Adjoining Pocket-3, Sector-19B, Dwarka, Ph-Ii. P / F Ms Tube Frame Structure With Reinforced Plastic Sheet For Covering Of Ramp In 352 Housing, Sector-19B, Dwarka Ph-Ii.

Key Value

Document Fees
Refer document
EMD
INR 105914.0 /-
Tender Value
INR 52.95 Lakhs /-

BOQ Items

Name of Work: C/o 352 Multistoried Two Bedroom Apartments adjoining Pocket-3, Sector-19B, Dwarka, Ph-II. SH: P/F MS tube frame structure with reinforced plastic sheet for covering of ramp in 352 Housing, Sector-19B, Dwarka Ph-II. Estimated cost: Rs. 52,95,713.00.
Sl. No. Item Description
1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
2Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
3Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated "J" or "L" hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick flat
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail