Construction Of Shamudaik Shuchalay In Bus Stand Chandwa, Block-Chandwa, District-Latehar Construction Of Shamudaik Shuchalay In Bus Stand Chandwa, Block-Chandwa, District-Latehar
Tender Value
12.84 Lakhs
Estimated cost
Bid Submission
11 Oct 2021
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
CHANDWA → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Shamudaik Shuchalay In Bus Stand Chandwa, Block-Chandwa, District-Latehar Construction Of Shamudaik Shuchalay In Bus Stand Chandwa, Block-Chandwa, District-Latehar
BOQ
| Sl. No. | Item Description |
| 1 | Plinth ProtectionEarthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item A) and disposal of exacvated earth as obtained to a distance up to 50M. Including all lifts levelling, ramming the foundation trenches removing rools of tree shurbs all complete as per approved desing building specification and direction of E/I. |
| 2 | Providing coarse celan sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 thick with all lead and lifs including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I.(mode of measurement compacted volume) |
| 3 | providing designation 75A one brick flat soling joint filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 4 | Providing P.C.C M- 150 in nominal mix of (1:2:4) in foundation with aprroved quality of stone chips 20mm to 6mm size grades and clean coarse sand of F.M 2.5 to 3 including screening, shuttering mixing cament concrete in mixer and placing in postion, vibrating, striking, curing taxes and royalty all complete as per building specification and direction of Enginner in charge. |
| 5 | Providing designation 75A brick work in C.M (1:4) in foundation and plinth with approve quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortal joint, cost of screenign materials raking out joint to 15mm depth, curing, taxes and royality all complete as per building specification and direction of E/I. |
| 6 | Providing R.C.C M-150 with Nominal mix of (1:1:5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing postion vibration, striking, cutting (but excluding the cost of reniforcement, taxes and royalty all complete, as per building specification and direction of E/I. |
| 7 | providing desingation 75A brick work in C.M (1:3) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joint, costs of screening, materials, scaffolfing, raking out joint to 15mm depth curing, taxes and royality all complete as per building specification and direction of E/I. |
| 8 | Providing R.C.C M-150 with nominal mix of (1:2:4) in lintel with aprroved quality of stone chips 20mm to 6mm. Size graded and clean coars sand of F.M. 2.5 to 3 including screeing, centering, shuttering, mixing cement concrete in mixer and placing postion vibration, striking, cutting (but excluding the cost of reniforcement, taxes and royalty all complete, as per building specification and direction of E/I. |
| 9 | Providing R.C.C M-200 with nominal mix of (1:1:5:3) in roof slab with aprroved quality of stone chips 20mm to 6mm. Size graded and clean coars sand of F.M. 2.5 to 3 including screeing, centering, shuttering, mixing cement concrete in mixer and placing postion vibration, striking, cutting (but excluding the cost of reniforcement, taxes and royalty all complete, as per building specification and direction of E/I. |
| 10 | Providing av. 63mm thick R.C.C M-150 with nominal mix of (1:2:4) chajja with approved quality of stone chips 20mm to 6mm size graded and clean coars sand of F.M. 2.5 to 3 including making drip course in conrete in mixer and placing in position, vibarting, striking, 6mm, cement plaster (1:4) in ceiling and side of chajja with sand of F.M 1.5 curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. |
| 11 | Providing 25mm thick precast R.C.C M-150 with nominal mix of (1:2:4) jali with approved quality of stone chips of 6mm. Nominal size and clean coars sand F.M. 2.5 to 3 with 1.6mm thick M.S. with as per approved desing and drawing and placing the same in position true to plumb and level and properly grouted with cement mortar (1:3) including cost of curing, scaffolding and finishing, all complete, as per building specification and direction of E/I. |
| 12 | Providing 12mm thick cement plaster (1:6) with clean coars sand F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 13 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coars sand F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 14 | Filling in foundation trenches and plinth in layers not exceeding 150mm, thick well waterd, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches withing a lead of 50 m and lift of 1.5M all complete as per building specification and direction of E/I. ( mode of measurement compacted volume) |
| 15 | providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19mm thick (1:2:4) with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thick (1:2) with 6mm down stone chips, in panel including cost of curing finishing the surface smooth by rubbing with carbonandum stone, taxes and royalty with all complete as per building specification and direction of E/I. |
| 16 | providing and laying hydracully machine pressed terrazo tiles 20mm thick in skirting of approved texure with 4mm down marble chips of approved shade, size and quality over 12mm, thick cement plaster (1:3) bese with neat cement slurry mixed eith pigment to match the shade to tiles between jouint, including rubbing and polishing to granolithic finish with approved quality of carbonadum stone including cost of curing, royalty and taxes all complete as per building specification and direction of E/I. |
| 17 | providing and laying 25mm thick kotaN stone slab flooring of approved size. Texture and colour over 19mm thick base of lime morter (1:1:1) (lime putty surkhi coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved and royalty all complete as per building specification and direction of E/I. |
| 18 | providing and laying 6mm. Precast white glazed tiles in walls over 12mm.cement mortar (1:3) andjointed white cement slurry including rubbing and polishing to granolithic finish with approved and royalty all complete as per building specification and direction of E/I. |
| 19 | Supplying, fitting and fixing 32mm thick good quality, well dressed and well seasoned local wood battened shutter ledged and braced in doors and windows with oxidized iron fitting such as hinges sliding door bolts tower boilts handles or rings hooks eyes cleats sand blocks taxes and royalty all complete as per building specification and direction fo Engineer in charge. |
| 20 | Supplying, fitting and fixing 20 guage G.C.I sheet gate fitted on M.S angle frame of szie 60x60x6cm, including cost of fabrication, providing necessary locking arrnagement with haskal and dommy duly fixed in P.C.C (1:2:4) blocks of required size, applying a primary lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 21 | Providing of two coat of snowcem of approved shade and make over a cost of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/I. |
| 22 | providing two coat of synthetic enamel paint ofapproved shade and make of new wooden surface including preparing thw surface after cleaning, removing dirt including scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 23 | Providing tor steel reinforcement of 10mm. 12mm. &16mm dia bars as per approved desing and drawing excluding carriage of M.S. bars to work site cutting, bending, and binding with annealed wire with cost of wire removel of rust, placing the roads in position all complete as per building specification and direction of E/I. |
| 24 | Supplying fitting and fixing P.V.C storage tank of I.S.I mark/syntex with over flow and locking arrangment as per specification and direction of E/I. |
| 25 | Providing designation 75A brick work in C.M(1:6) below tank base with approved quality of clean coarse sand of F.M. 2T2.5 including providing 10mm thick mortar joints cost of sceening, materials, scaffolding, raking out joint to 15 mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 26 | Providing 150mm. Wide brick in cement mortar(1:6) with av. 150mm. Clear depth and 150mm. Apron including cost of earthwork involded with 75mm. Cement concrete (1:4:3) over one brick desingnation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 27 | Supplying labour and tools for fixing G.I. pipe with red lead and yarn of following nominal bore with screwed and socketted joints on wall, celling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugw, cutting pipes to sizes and threading ends if required etc. all complete as per specification and direction of Engineer in chargeA) 15mm diameter |
| 28 | B) 25mm diameter |
| 29 | C) 32mm diameter |
| 30 | Providing and fitting male ended 15mm diameter brass bib cock of approved quality Wt not less than 400 grams) with extra socket all complete as per specification and direction of Engineer in charge. |
| 31 | Providing and fixing 15mm diameter male ended C.I. plug cock (wt. not less than 300 gram) of approved quality with extra socket all complete as per specification and direction of Engineer in charge. |
| 32 | Providing and fixing gunmetal full way valve of approved quality all complete as per specification and direction of Engineer in charge.25mm diametar (not less than 500gm) |
| 33 | 32mm diameter (not less than 700gm) |
| 34 | Supplying and fixing G.I. fitting of approved make all complete as per specification and direction of Engineer in charge.Elbow(a) 15mm dia |
| 35 | (b) 25mm dia |
| 36 | (c) 32mm dia |
| 37 | TEE (Plain)(a) 15mm dia |
| 38 | (b) 25mm dia |
| 39 | (c) 32mm dia |
| 40 | Reducing socket(a) 25mm dia |
| 41 | (b) 32mm dia |
| 42 | Nipple(a) 15mm dia |
| 43 | (b) 25mm dia |
| 44 | (c) 32mm dia |
| 45 | Plugs(a) 15mm dia |
| 46 | (b) 25mm dia |
| 47 | Union socket(a) 15mm dia |
| 48 | (b) 25mm dia |
| 49 | (c) 32mm dia |
| 50 | Socket(a) 15mm dia |
| 51 | (b) 25mm dia |
| 52 | (c) 32mm dia |
| 53 | JAM NUTS(a) 15mm dia |
| 54 | (b) 32mm dia |
| 55 | Making holes in walls for laying G.I. pipes and restoring the same after pipe laying all complete as per specification and direction of Engineer in charge.(A) 125mm thick wall |
| 56 | (b) 250mm thick wall |
| 57 | Supplying fitting and fixing 40mm high vitreout white glazed earthen E.W.C with p trap of parry hindustan or any other approved I.S.S make including supplying and fixing 15liter C.I mosquito proof low down flushing cistern of apprvoed make with complete fitting qith C.I handle and R.S or racket with telescopic flush pipe with brass coupling and plumber joint spindle stop cock of approved quality weight not less than 450gram 15mm PVC alkathene pipe 45cm long with brass coupling at both ends and white /black plastic solid state seal and lead of commander cuckoo or other I.S.S make with hinges or screws etc painting pipe amd cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I.(a) 12.5 lit low level PVC cistem |
| 58 | Supplying fitting and fixing flat back or angular, lipped front vitreous white glazed earthenware uninal of Hindustan perry or any other approved I.S.S. make with 5liter capacity C.I Automatic fussing cistern of reliance for any other I.S.S approved make with all fitting with C.I or R.S bracket standard size G.I flush pipe with fitting clamps 15mm C.I body brass spindle stop cock of approved quality weight not less than 400gram 15mm PVC alkathenae pipe 450mm logn with brass coupling at both ends and doing plumber joints including painting of exposed pert with two coats of approved paint over a priming coat of red oxide , cutting wall and floor making good the same etc all complete as per specification and direction of E/I,A flat back or standing corner (600x350mm) |
| 59 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S approved make supported on pointed C.I or R.S bracket 32m C.I brass waste 15mm dia C.I body brass spindle stop cock of approved quality of weight not less than 350gram, 32mm PVC waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 60 | Supplying, fitting and fixing HCI pipes (125 mm diameter |
| 61 | Supplying and fixing HCI fitting(a) 100mm x 110 mm diameter P Trap |
| 62 | (b) 100 mm diameter floor Trap with gratings |
| 63 | (c) 100 mm diameter plain bend |
| 64 | Making holes in walls for laying U.P.V.C pipes and restoring the same after pipe laying all complete as per specification and direction of Engineer in charge.(A) 125mm diameter |
| 65 | Earth work in excavation of laying of different types and sizes of R.C.C spun pipes with disposal of excavation earth within initial lead and liftall complete as per specification and direction of E/I.(b) For Classification of Soil Item B |
| 66 | Earth work in back filling the trenchs after laying different type and sizes of R.C.C spun pipes with earth removed during excavation within initial lead and liftall complete as per specification and direction of E/I. |
| 67 | Providing laying fitting and fixing NP2 R.C.C spun pipe with rollars in lines, level and grade and providing apprvoed jointing materilas and joint properly filled to make them leak proof including providing singh rail boning rod, night guard, red light, and barrier etc. all complete as per specification and direction of E/I.100 mm diameter R.C.C spun pipe |
| 68 | Construction brick masonry chmaber for underound R.C.C inspection chamber and bends with class 75 designation brick inside demension 450x600mm and 200mm deep with 250th brick |
| 69 | Making 2 nos , soak pit 2.1 diameter 2.4m deep earth work |
| 70 | Hony combed brick work in 1:6 |
| 71 | Brick bats supplying and filling |
| 72 | sand supplying and filling |
| 73 | Providing and fixing Gum metal full way valves of approved makeall complete as per specification and direction of E/I.25mm dia G.I full way valve weight not less than 500gram |
| 74 | Providing, fixing Gun metal non return valve of approved qualityall complete as per specification and direction of E/I.50mm dia waight not less than 1kg |
| 75 | Plinth ProtectionEarthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item A) and disposal of exacvated earth as obtained to a distance up to 50M. Including all lifts levelling, ramming the foundation trenches removing rools of tree shurbs all complete as per approved desing building specification and direction of E/I. |
| 76 | Providing coarse celan sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 thick with all lead and lifs including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I.(mode of measurement compacted volume) |
| 77 | providing designation 75A one brick flat soling joint filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 78 | Providing P.C.C M- 150 in nominal mix of (1:2:4) in foundation with aprroved quality of stone chips 20mm to 6mm size grades and clean coarse sand of F.M 2.5 to 3 including screening, shuttering mixing cament concrete in mixer and placing in postion, vibrating, striking, curing taxes and royalty all complete as per building specification and direction of Enginner in charge. |
| 79 | Providing designation 75A brick work in C.M (1:4) in foundation and plinth with approve quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortal joint, cost of screenign materials raking out joint to 15mm depth, curing, taxes and royality all complete as per building specification and direction of E/I. |
| 80 | Providing R.C.C M-150 with nominal mix of (1:2:4) in bean of all types with aprroved quality of stone chips 20mm to 6mm. Size graded and clean coars sand of F.M. 2.5 to 3 including screeing, centering, shuttering, mixing cement concrete in mixer and placing postion vibration, striking, cutting (but excluding the cost of reniforcement, taxes and royalty all complete, as per building specification and direction of E/I. |
| 81 | Providing R.C.C M-150 with nominal mix of (1:2:4) in roof slab with aprroved quality of stone chips 20mm to 6mm. Size graded and clean coars sand of F.M. 2.5 to 3 including screeing, centering, shuttering, mixing cement concrete in mixer and placing postion vibration, striking, cutting (but excluding the cost of reniforcement, taxes and royalty all complete, as per building specification and direction of E/I. |
| 82 | Providing tor steel reinforcement of 8mm to 10mm. dia rods as per approved desing and drawing excluding carriage of M.S. bars to work site cutting, bending, and binding with annealed wire with cost of wire removel of rust, placing the roads in position all complete as per building specification and direction of E/I. |
| 83 | Providing 12mm thick cement plaster (1:4) with clean coars sand F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.Providing 1.5mm. Cement punning including curing, carraiage of water with all leads and lift as per building specification and direction of E/I. |
| 84 | Supplying fitting and fixing 600mmx450mm size C.I cover with frame for man hole all complete as per specification and direction of E/I. |
| 85 | Supplying fitting and fixing 100mm dia S.W tee and Y all complete as per specification and direction of E/I.100 mm dia S.W Tee |
| 86 | 100mm Dia S.W.Y |
| 87 | Carriage of Materials(a) Brick Lead 10 KM |
| 88 | B) Stone chips lead 10KM |
| 89 | C) Sand Lead 10KM |
| 90 | D)Steel Lead 15KM |
| 91 | E) Cement Lead 15KM |
| 92 | Construction of 200x150 mm dia High yield D/Tupe well in all kinds of soil and rocke with D.T.H rig machine suitable for installation of submersible pumps set including supplying all materials tools, and air compressorand equpment as well as cost of fuel, lubricents, transportation of rig machine and other supporting vecelis up to the site including cost of flushing charge and geological investingation etc. all complete.(A) 0-50 meter |
| 93 | B) From 50-125 meter onward |
| 94 | Supplying all tools tackless and lowering of 200 mm MS ERW casing pipe of 6mm wal thickness including weging charge cost of pipe etc including all taxes VAT excise duty, freight chargeswith inspection charges etc. as applicable all complete job. |
| 95 | Clearing, Flushing and developing of drilled hole for testing the discharge of water development of bore well by continuous flow of water by using heavy compressor up to satisfaction of E/I to get un interrupted flow of water free from sand and soil etc. |
| 96 | Supplying all materilas tools and eqipment for fitting and fixing 200mm dia MS cap over casing pipe etc all complete job |
| 97 | Supplying submersible pump sets confiming to IS 8034 and motor confirming to IS 9283 pump shall be suitalge for various delivery head and discharge with stainless steel pump shaft and polypropylene nory imeller, motor suitable for working on 415v+10% 1HP 50 Hz A.C supply with cable guard thrust carbon fiber bearing to withstand entire hydraulic thurs water proof winding shall be provided submersible pump set 100 mm dia (with polypropylene/Nory/Impeller) up to 20 stages. |
| 98 | Cost of supplying fitting and fixing panel board with starter main switch, kit kat, prenometer voltmeter etc, all complete job. |
| 99 | Cost of 25mm dia heavy duty GI pipe for section pipe (tata make)including fitting and fixing etc. all complete job. |
| 100 | Cost toward 25mm dia GI bend , GI socket nipple 25mm full way valve G.I. Tee, plug, G.I glange, 25mm N.R. valve and other fitting |
| 101 | Supplying all tools, equipment and labour for installation of submersible motor pump set with flat water proof cable wire in the bore well including transportaion and materials all complete job. |
| 102 | Cost toward light wiring of pump house including supplying 3/20 PVC 7/20 PVC single cone copper cable 100mm holder wooden board switch bulb and also doing earthing by SWG 8 nos copper wire including supplying 32mm dia G.I pipe 3mtr,32mm dia GI bend 2nos socket etc all J.S.E.B rules |
| 103 | Cost Toward payment to J.S.E.B for giving electric connection, KWH motor installation testing etc all complete job. |
| 104 | Providing and erecting with all accessories and fiting including copper wire earthing servo controlled 2KVA automatic Voltage stablizer suitable for out put Voltage of 415 Volt+/- 1% 1 Ph 50Hz with copper wound transfermer. |
| 105 | Carriage of Materials Sl No 01 to 23 |
| 106 | Add GST 12% Sl No 1.00 to 105.00 |
| 107 | Add Sub Tax @ 1% of total amount of Item no. 1.00 to 87.00 |
AI Tender Summary
Tender Timeline
Oct 06, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 11, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 20, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender