Construction Of Smart Park At Athmallik Nac Construction Of Smart Park At Athmallik Nac
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Oct 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ATHMALLIK → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Smart Park At Athmallik Nac Construction Of Smart Park At Athmallik Nac
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing of land including rank vegitation grass bushes shrubs sapplings and tress girth upto 300mm removal of stups of tress cut earlier and disposal of unserviceable materials and stacking of serviceable materials used or auctioned upto a lead 1000mtr including removal and disposal of top organic soil not exceeding 150mm in thickness etc all complete as per direction of the EIC |
| 2 | Supplying stacking and leveling of good earth at site including royalty and carriage complete earth measured in stacks will be reduced by 20 percent for payment |
| 3 | Labour for stacking and leveling of good earth at site including royalty and carriage complete earth measured in stacks will be reduced by 8 percent for payment |
| 4 | Labour for Grassing with selection no 1 grass including watering and maintenance of the lawn for 30days or more till the grass forms and thick lawn free from weeds and fit for mowing including supplying good earth if needed the good earth shall be paid for seperately |
| 5 | Supply of dump manure etc complete |
| 6 | Supply of selection one grass etc complete |
| 7 | Providing and displaying of Aracaria cookie plant 1.20m to 1.35m straight well developed fress and healthy with lush green leaves from bottom to top in 25cm size of earthen pot plastic pot and as per direction of the EIC |
| 8 | Providing and displaying of Aglaonema sam ht 30cm well developed three in one having 18 to 20 fresh healthy and attractive colourful leaves in 35cm size earthen pot tray and as per direction of the EIC |
| 9 | Croton Golden specimen having ht 90cm to 105 cm with 5 to 6 branches well developed fress and healthy foilage in 30 cm size of earthen pot plastic pot |
| 10 | Croton petra banglore specimen variety having height 60cm to 75cm with 4 to 6 branches well developed fresh and healthy foliage approximately 60 to 65 leaves in 30cm size of earthen pot plastic pot well developed fresh and healthy colourful leaves in 30cm size of earthen pot plastic pot |
| 11 | Drancaena song of India specien plant three one having ht 63cm and well developed fresh and healthy foliage in cm size of earthen pot plastic pot well developed fresh and healthy colourful leaves in 30cm size of earthen pot plactic pot |
| 12 | External Bamboo buddha velley variety with umbrella shape plant having 120 to 135ht plant with fresh healthy foliage well developed in 40cm cement pot multy brancha bushy plant |
| 13 | Phoenix roebeleni palm well developed having 20 to 25cm ht fresh and healthy leaveas 90 to 105cm ht in 30cm cement pot |
| 14 | Travelerspalm well developed fresh and healthy foliage 120 to 150cm ht in 35cm cement pot |
| 15 | Washingtonia filifera palm well developed having 90to 105cm ht fresh and healthy leaves having 5 to 6 staright in 35cm cement pot |
| 16 | Internal Providing and stacking of Alpina Variegated three in one having ht 30cm and above with fresh and healthy variegated foliage in 25cm size of Earthen pot plastic pot as per direction of EIC |
| 17 | Providing and stacking of Tradescantia Zebrina having ht 15cm and above with fresh and healthy variegated foliage in 25cm size of Earthen pot plastic pot as per direction of EIC |
| 18 | External Plants Providing and stacking of Bottle palm of ht 210 240cm bottom girth 30 35cm well developed in big HDPE bag |
| 19 | Providing and stacking of Cassia Siamea of ht 150 165 cmin big poly bag of size 25cm as per direction of EIC |
| 20 | Providing and stackingof dalberiga sissoo seasam of ht 120 135cm in big poly bag of size 25cm as per direction of EIC |
| 21 | Providing and stacking of ficus nuda of ht 150 165cm bottm girth 15 20 cm well developed in big HDPE bag |
| 22 | Providing and stacking of fishtail palm of ht 150 180cm in big poly bag of size 25cm as per direction of EIC |
| 23 | Providing and stacking of Michellia Champa Golden champa of ht 90 105cm in big poly of size 25cm as per direction of EIC |
| 24 | Providing and stacking of Milingtonia hortnsis of ht 150 135cm in a big poly bag of size 25cm as per direction of EIC |
| 25 | Excavation of foundation trenches in all kind of soil including cost of all shuttering and shoring in all sides dewatering the trenches if required dressing the sides and leveling the bed up to the required depth and width and depositing the excavated materials within initial lead and lift for reuse or as directed by the EIC including cost of all labour all other machineary pupms and T and P required for the work complete in all respect as per latest specificationand directionof EIC within 50m initial leas and 1.5m initial lift |
| 26 | Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost conveyance royalties, taxes of all materials and cost of all labour with T and P sundries required for the work etc. complete Measurement will be taken on finished compacted section as per specification and direction of Engineer-in-charge |
| 27 | Plain Cement concrete (1:4:8) in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete, watering, curing etc complete to required levels laid in layers not exceeding 0’-6” thick in each layer including cost, conveyances, royalties, taxes of all materials and cost of all labour with Tand P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 28 | Plain Cement concrete (1:4:8) in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete, watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick in each layer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 29 | Cement concrete (1:2:4) with 12mm size crusher brokenhard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete. |
| 30 | Rigid smooth centring and shuttering for R.C.C. works including false work and dismantlingthen after castingincluding cost of materials all complete. |
| 31 | Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royaltiesand taxes of all materials, cost all labour, I & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge. |
| 32 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.(outside) |
| 33 | Primingone coat with any approved primerincluding cost of all labour, materials T & Pwith taxes, transportation etc all complete. |
| 34 | Wall painting 2 coats with Plastic Emulsion Paint/Weather Coat of approved shade on new work to give an even shade in Ground Floor. |
| 35 | Structral Providing and fxing to existing door frames 24mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24mm and wall thiickness 2mm with inbult edging on both side.The styles and rails mitered and joint at the corners by means of MS galvanised plastic brackets of size 75 x 220 mm having wall thickness 1.0mm and having wall thickness 1.0mm and stainless steel screws |
| 36 | Excavation of foundation trenches in all kind ofsoil including cost of all shuttering and shoring in all sides, dewatering the trenches, if required, dressing the sides and leveling the bed up to the required depth and width and depositing the excavated materials within initial lead and lift for re-use or as directed by the Engineer-in-charge including cost of all labour, all other machineries, pumps and T&P required for the work complete in all respect as per latest specification and direction of Engineer-in-Charge wtihin 50m initial lead and 1.5 m initial lift |
| 37 | Supplying, & filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete (Measurement will be taken on finished compacted section) as per specification and direction of Engineer-in-charge. |
| 38 | Plain Cement concrete (1:4:8) in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete, watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick in each layer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 39 | Cement concrete (1:2:4) with 12mm size crusher brokenhard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete. |
| 40 | Providing, lifting, hoisting and laying Reinforced Cement Concrete of M-20grade inColumn base, Column Footings, Raft Foundation,StemoftheColumns, beams, chaujja, fin, lintel, stair case, jali , shelvesandslab etcas per approved designs and drawings having a minimum compressive strength ( in work test)20N. / Square mm. in 15 cm. cubes at28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleanedto be mixed in concrete mixturewith approved quality of cementincluding hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days including, centering and shuttering then after dismantling and removing thedebrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials , cost of all labours, scaffolding, sundries, T&P required for the work etc. completeinall respectbutthe excluding cost &conveyanceof M.S. rods or Tor Steel and Binding wires and labour |
| 41 | Fixing of ceramic floor tiles in floors treads or steps and landing on 25m thick bed of cement mortar1:1 jointed with neat cement slurry mixedwith pigment to match the shades of the tiles including rubbing and polishing |
| 42 | Column in Superstructure |
| 43 | Plinth band |
| 44 | Lintel |
| 45 | Roof Beam |
| 46 | Roof Slab |
| 47 | Chajja |
| 48 | Cutting,Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance,loading, unloading & taxes of M.S plain/HYSD/TMT reinforcement bars and binding wires of 18 to 20 gaugo required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S plain/HYSD/TMT reinforcement bars consumed in the work only. |
| 49 | Rigid smooth centring and shuttering for R.C.C. works including false work and dismantlingthen after castingincluding cost of materials all complete footing in foundation |
| 50 | Column in superstructure |
| 51 | Plinth Band |
| 52 | Lintel |
| 53 | Roof Beam |
| 54 | Roof Slab |
| 55 | Chajja |
| 56 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentin cement mortar (1:3) in foundation and plinth etc complete. |
| 57 | Providing FlyAsh brick masonry work in Super Structurewith fly ash bricks 25cmx12 cm x8 cm tolerance of ± 2% sizebricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour,conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. |
| 58 | Providing 6mm thick cement plaster in cement mortar (1:4) to Ceiling of Roof Slab, Stairs, Chajjas, shelves, lofts, beam soffit & sides & other R.C.C. surfaces including deep close chipping, roughening, scrapping, cleaning the exposed R.C.C. surface finishing smooth, providing masonry drip course & grooves wherever necessary including watering, curing, scaffolding etc, complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work, screening the sand etc. complete as per specification & direction of the Engineer-in-charge |
| 59 | Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royaltiesand taxes of all materials, cost all labour, I & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge |
| 60 | Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royaltiesand taxes of all materials, cost all labour, I & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge. |
| 61 | Providing 20 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:4) with cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royaltiesand taxes of all materials, cost all labour, I & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge. |
| 62 | Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines, frames of doors, windows, ventilabours and beams etc complete. |
| 63 | 32mm thick piasal wood or local teak wood fully glazed shutters complete with iron fitting and wooden hinged cleats etc., fitted and fixed in position including all labour, but excluding the cost of glass panes and iron fittings |
| 64 | Providing and fixing M.S. grills of required pattern in frames of windows, ventilators, rolling shutters etc. With M.S. flats, square or round bars etc all complete. Details of cost for a grill 90x120cm = 1.08sqm.(18.54 kg) |
| 65 | Primingone coat with any approved primerincluding cost of all labour, materials T & Pwith taxes, transportation etc all complete. For plastic surface |
| 66 | From steel work up to 4.5m from GL |
| 67 | From wood work up to 4.5m grom GL |
| 68 | Wall painting 2 coats with Plastic Emulsion Paint/Weather Coat of approved shade on new work to give an even shade in Ground Floor. Up to 4.5m from GL |
| 69 | Wall painting 2 coats with Weather Coat of approved shade on new work to give an even shade in Ground Floor. Up to 4.5m from GL |
| 70 | Enamel Paintingtwo coats with any approved paint including cost of all labour, materials T & Pwith taxes, transportation etc all complete in Ground Floor |
| 71 | 2.5cm artificial stone flooring with cement concrete (1:2:4) including punning using 12 mm size crusher broken granites chips.Ground floor. |
| 72 | Granite 20mm thick |
| 73 | Granite above 10mm thick |
| 74 | Creamic floor tile |
| 75 | Mosaic tile |
| 76 | Fixing Tiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete with & without cost of precast tiles. |
| 77 | Supplying, fitting & fixing up window, door made up aluminium section 9778 as window frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm. thick plain glass as panel fitted with rubber bending including lucking arrangement including all fittings including cost of materials all taxes, labour, T & P excluding cost of glass etc complete as per direction of Engineer in Charge. |
| 78 | Earth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders required depth and depositing the excavated materials away from the work site with all leads and lifts including shoring shuttering & dewatering (if required) with cost of labour hire & running charges of waterpumps sundries & T & P required for the work complete as directed by the Engineer in charge. |
| 79 | 2nd Depth of 1.50mtr |
| 80 | 3rd Depth of 1.50mtr |
| 81 | Providing & layingPlain Cement concrete (PCC )of proportion (1:4:8) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect. |
| 82 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentin cement mortar (1:3) in foundation and plinth |
| 83 | Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royaltiesand taxes of all materials, cost all labour, I & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge. |
| 84 | Cement punning |
| 85 | Cement flush pointing to brick masonry ( 1 : 3) including racking out joints 5mm deep, cleaning, pressing cement mortar finishing and curing including cost of materials, labour, scaffolding with initial lead and lift upto 10m etc. complete as per the direction of Engineer-in-charge. |
| 86 | R.C.C work in ground floor of M-25 gradewith 20mm & down grade crusher broken hard Granite chipsincluding hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete |
| 87 | Rigid smooth centring and shuttering for R.C.C. works including false work and dismantlingthen after castingincluding cost of materials all complete |
| 88 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge |
| 89 | Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge for 100 cum |
| 90 | Cement concrete (1:2:4) with 12mm size crusher brokenhard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete. |
| 91 | Soapkit Earth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders required depth and depositing the excavated materials away from the work site with all leads and lifts including shoring shuttering & dewatering (if required) with cost of labour hire & running charges of waterpumps sundries & T & P required for the work complete as directed by the Engineer in charge |
| 92 | 2nd Depth of 1.50mtr |
| 93 | Supplying and filling plinth with coarse sand well watered and rammed in layers not exceeding 23 cm in depth with all lead and lift including cost, conveyance,loading,unloading,royalities and taxes of all materials cost of all labour sundries T&P required for the work etc complete in all respect as directed by the engineer in charge (Measurement will be taken on finished compacted section only.) |
| 94 | C.C (1:4:8) with 4cm size HG Crusher BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C |
| 95 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentin cement mortar (1:3) in foundation and plinthcharge. |
| 96 | R.C.C work in ground floor of M-25 gradewith 20mm & down grade crusher broken hard Granite chipsincluding hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete . |
| 97 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge |
| 98 | Dry brick khoa well watered and rammed etc complete |
| 99 | Cost of SFRC RCPC cover of size 0.60mtr dia |
| 100 | Supplying, Fittings & Fixing at all heights with all labour, T&P as per specification, the GI pipes confirming to relevent IS specification of medium series (TATA / Jindal) of following sizes with necessary GI fittings such as bends,elbows,Tees,reducers, sockets,longscrews,unions,short -piece,nipples,caps,plugs with clamps,hooks to the walls/floor etc.complete in all respect as per the directionof the Engineer- in -charge |
| 101 | 65mm dia GI Pipe |
| 102 | 50mm dia GI Pipe Riser pipe |
| 103 | 25mm dia GI pipe concealed |
| 104 | Supplying, Fittings & Fixing in floors and at all heightsthe CPVC pipesof following sizeswith necessaryfittingsto thewallsincluding concealing the pipes with cutting grooves to the brick & concrete walls and making good to the grooves/damagesafter laying and fixing the pipes, with C.M. (1:4) etc. complete in all respect as pe rthe direction of the Engineer in charge.(Concealed) |
| 105 | 20mm dia CPVC pipe |
| 106 | Supplying, Fittings & Fixing with all labour, T&P as per specification, the following Brass / CP(Jaquar) /G.M. fittings at appropriate locations along the pipe lines at all floors and at all heights of approved make confirming to relevent IS specification. etc.complete in all respect as per direction of the Engineer in charge 15mm dia CP2 way bib cock short body |
| 107 | 15mm dia CP Bib cock Long body |
| 108 | 15mm dia CP Angle stop cock |
| 109 | 15mm dia Conc stop cock |
| 110 | 15mm dia CP Pillar cock |
| 111 | 15mm long Shower with arm |
| 112 | 600mm long CP Towel rail |
| 113 | CP soap holder |
| 114 | 100mm dia CP Grating |
| 115 | 15mm dia CP Towel Ring |
| 116 | 15mm dia CP hot and cold Mixture with provision of telephonic shower |
| 117 | 600mm long CP Glass shelf with CP frame |
| 118 | 32mm dia CP Waste |
| 119 | Telephonnic Shower Health Faucet |
| 120 | 80mm dia GMFW valve |
| 121 | 65mm dia GM FW valve |
| 122 | 50mm dia GM FW valve |
| 123 | 25mm diaGM FW valve |
| 124 | 6mm thick cement plaster (1:4) on brick work including all cost conveyance royalty and taxes etc complete to work site |
| 125 | Supplying, Fittings & Fixing with all labour, T&P as per specification, the following flexible PVC connection pipes and waste pipe making connection with pillar cock, cistern. Wash handbasin at all height and all floors with all jointing materials etc. complete as per direction of the Engineer -in- charge. 450-600 mm long 15mm dia PVC connection pipe |
| 126 | 32mm dia flexible PVC waste pipe each of 1 mtr pipe |
| 127 | Supplying, Fittings & Fixing of 10 Ltr. Capacity low level P.V.C cistern white colour, (Parryware-Slimline) to wall at all floors and at all height with all accessories etc. completein all respect as per direction of the Engineer -in- charge. |
| 128 | Supplying, Fittings & Fixing of following sizes of porcelain wash hand basin confirming to relevant IS specification of Nycer/ Cera/ Parryware maketo the brick / concrete wall etc. complete as per direction of the Engineer in charge. |
| 129 | Supplying , fitting and fixing the standard size ofEuropean pattern porcelain wash down water closet confirming to relevant IS specification of Nycer/ Cera / Parryware make having \"S\" or \"P\" trap etc with all required materials, labour T&P etc. complete as per direction of the Engineer in charge. |
| 130 | Supplying ,fitting and fixing with all labour and T & P 4mm thick bevelled edge sheet glass mirrorof relevant IS specification to the brick concrete wall with full sheet hard board and CP down shaped screw on wooden /PVC plug etc. complete as per direction of the Engineer in charge. |
| 131 | Supplying ,fitting and fixing of 40 mm dia PVC pipeand fittings with jointing materials to drain out waste waterfrom basin / sink etc complete as per direction of the Engineer in charge. |
| 132 | Supplying all labour T & P etc for cutting holes in brick masonry wall/ RCC work for passing of GI Pipes of 15 mm to 50 mm dia and making good to the damages with C.M. (1:4) as per direction of the Engineer in charge. |
| 133 | Supplying, fitting & fixing ofISI marked PVC,CLASS-B(SWR) pipeswith all materials, labour &T&P on concrete / Brick walls and grounds with nails, bobbins and wooden plugs as required including , scaffolding with proper plumbing fittings for exposed pipescomplete in all respect as per direction of the Engineer in charge. Ground floor |
| 134 | 75mm dia PVC pipes Anti siphon pipe |
| 135 | Supplying, fitting & fixing of following size of UPVC,CLASS-B(SWR) fittings of ISI marked to UPVCpipes (on concrete / Brick walls and grounds) with all materials labour T&Pincluding cutting of the walls, with supply of nails, bobbins and wooden plugs as required includingscaffolding etc. complete in all respect as per direction of the Engineer in charge. 110mm dia single junction with door |
| 136 | 110mm dia double junction with door |
| 137 | 110mm dia Door Bend |
| 138 | 110mm dia Heel Rest Bend |
| 139 | 110mm dia p trap |
| 140 | 110mm dia Off set |
| 141 | 110mm dia plain bend |
| 142 | 110mm dia cowl |
| 143 | 110 x 75mm dia T junction |
| 144 | 75mm dia single junction with door |
| 145 | 75mm dia single junction without door |
| 146 | 75mm dia cowl |
| 147 | Supplying all materials labour and T and P for proving sanitary sealing by cement concrete grouting of annular space around GI PVC MS housing pipe up to 5mtr below ground level to plug the bore hole including cost of cement etc all complete |
| 148 | Labour for drilling a perfectly vertical bore holes of specified diameter for a specified depth below ground level through hard and boulder formation by means for Fast Drilling Sophisticated Rigs as required to suit the site condtion as per the direction of Engineer-in charge including deployment of rig with its accessories,T&P and consumables etc. for a finished bore suitable for lowering of 125 x 100 mm nominal dia PVC or GI casing pipes fitted with sockets and with or without well screens as per necessity for the soft and hard formations drilled by combination drilling method.Drilling 200mm bore from 0 mtr |
| 149 | Drilling 150mm bore from mtr to 100mtr |
| 150 | Labour for lowering the following sizes of PVC or GI pipes with or without strainers as per necessity and fitted and fixed up in perfectly vertical position including cutting and threading the pipes as may be necessary and supplying all jointing materials, extra sockets (GI or PVC heavy quality) , tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging the tube wells to prevent entry of foreign materials from above. |
| 151 | Cleaning and developing the tube well with supply of comperssor worked till clear and adequate discharge is obtained from the tube well incuding supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge. |
| 152 | Supply of 150mm PVC pipes as per ASTM-1785/89 schedule-80. The cost of pipes will be paid as per EPM rate contract including taxes and transportation. |
| 153 | Supply testing and commissoning of 1HP, 3Phase Vertical submerssible Pump set including all taxes, conveyance etc. complete as direction of Engineer-in-charge. |
| 154 | Suoolying all labour materials T&P for fitting fixing of following MS/CI fittings as per specification and direction of EIC. |
| 155 | Supplying all materials labour and T and P for proving sanitary sealing by cement concrete grouting of annular space around GI PVC MS housing pipe up to 5mtr below ground level to plug the bore hole including cost of cement etc all complete Labour for lowering |
| 156 | 63mm HDPE pipe |
| 157 | 50mm SS nipple |
| 158 | Bore cover |
| 159 | MS clamp for 63mm pipe |
| 160 | Plastic roap |
| 161 | 4 sq mm |
| 162 | 1 HP vertical submersible single phase pump |
| 163 | Control panel |
| 164 | Supply of dustbins as per specification provided |
| 165 | Supply of Floor Mounted Hot and Normal Water Dispenser with cold water capacity of 80ltr and hot water capacity of 1ltr and as per specification provided |
| 166 | Jungle rumble playzone as per specification provided (play eq 1) |
| 167 | Jungle rumble playzone as per specification provided (play eq 4) |
| 168 | Supply of 5way climber as per specification provided (play eq 9) |
| 169 | Snake climber as per specification provided (play eq 11) |
| 170 | Wiring to Light, Exhaust Fan, Call Bell and Ceiling Fan with 1.5 mm2 PVC insulated 1100 volt grade multi-stranded Copper Conductor Wire for Phase, Neutral And Earth Continuity Conductor and loop earth to fitting and fixture run inside 2mm thick PVC Conduit Pipe recessed in Wall/ Column/ Ceiling of the Building including supply of materials such as Clip-In Modular type Switches, Sockets, Modular PVC Switch Boxes, Cover, FR PVC Wire, Ceiling Rose, Angle / Batten Holder, Junction Box etc. complete with making good the damages caused as required and as per Direction of Engineer-In-Charge. Single Light Point controlled by One 6 Amp. Switch / First Light Point of Group Control. |
| 171 | Subsequent Light Point. |
| 172 | Ceiling Fan Point with supply and fixing of Ceiling Fan Hook made of 10 mm Steel Round Bar. (Space shall be provided for installation of Electronics type Stepped Fan Regulator). |
| 173 | 6 Amp. Plug with 6 Amp. Switch on Same Board. |
| 174 | 6 Amp. Plug with 6 Amp. Switchon Separate Board. |
| 175 | 2 x 6 AMP plug on separate board |
| 176 | Exhaust fan point |
| 177 | Supply, delivery, installation & testing of following Plug Boards including inter- connections and making good the damages caused complete as required and as perDirection of Engineer-In-Charge.6 / 16 Amp. Plug Boards consisting of a 16 Amp. Clip-in type Modular Switch with Indicator and a 6/16 Amp. Clip-in type Modular shuttered Plug Socket fixed on Metallic Concealed Box |
| 178 | 6 / 16 Amp. Plug Boards consisting of a 6 / 16 Amp Clip-in type Modular shuttered Plug Socket fixed on Metallic Concealed Box. |
| 179 | Wiring for Circuits and Submain with following number & sizes of PVC insulated 1100 Volt Grade Multistranded Copper Conductor Wire run inside 2 mm thick PVC Conduit Pipe Recessed in Ceiling / Column / Walls of Building including supply of all materials such as wires, PVC Conduit, Junction Box & Pull Box etc. complete with making good the damages caused as required and as perDirection of Engineer-In-Charge 2 Nos. Single Core 2.5 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 Copper Wire for Earth Continuity Conductor as per SLD. |
| 180 | 2 Nos. Single Core 4.0 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 Copper Wire for Earth Continuity Conductor as per SLD. |
| 181 | 4 Nos. Single Core 6.0 mm2 Copper Wire for Phase and Neutral and 2 Nos. Single Core 4.0 mm2 Copper Wire for Earth Continuity Conductor as per SLD. |
| 182 | Supply, delivery, installation and testing of TV Antenna Outlet Boards containing a Modular type TV Antenna Socket fixed on Modular Concealed Box including connections and making good the damages caused complete as required and as perDirection of Engineer-In-Charge. |
| 183 | Supply, delivery, installation and testing of TV Antenna Wires RG6 in PVC Pipe and making good the damages caused complete as required and as perDirection of Engineer-In-Charge. |
| 184 | Supply, delivery and laying of following sizes of 2 mm Wall thickness rigid PVC Conduit Concealed in Wall/ Column/ Roof Slab of the Building or mounted on surface along with other accessories and 18 SWG GI Fish Wire complete for Telephone / TV / Circuit or Sub main wiring as required & as perDirection of Engineer-In-Charge. 20mm dia |
| 185 | 25mm dia |
| 186 | Supply, delivery, installation, testing & commissioning of L.T. Indoor Wall mounted Double Door type Distribution Boards of Original Factory made enclosures of the same Brand as the MCB conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per theDirection of Engineer-In-Charge. Outgoing : 12 Nos. 10 Amp SP MCB 10 KAas per Requirement. |
| 187 | Power Distribution Board: (6 Way TPN DB Mettalic double door): Company made Metal Door type with IP-43 Degree of Protection. Outgoing : 9 Nos. 32 Amp DP MCB 10 KAas per Requirement. |
| 188 | Supply, delivery, installation and testing of following types of Fluorescent Tube Fixtures Directly on Wall / Ceiling of Building with all accessories such as Electronics Ballast, Lamps, Stove Enameled Box, Perplex Sheet Cover etc. complete assembly and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge. (For Common Service Areas). 1 X 28 Watt T-5 Fluorescent Tube fixtures similar to Philips Catalogue No. - TWG 207 1 X TL5-28W HF or Equivalent. |
| 189 | Night Lamp LED |
| 190 | Angle Holder with 15 Watt LED (Angle Holders - 6 Nos. and Bed Lights - 18 Nos.) |
| 191 | Supply, delivery, installation and testing of following Sweeps of High Speed Energy Efficient A.C. Ceiling Fan complete with Fan Blades, Down Rod, Canopies & Capacitor etc.including supply of Sundry Materials, making connection from the suitable point outlet but excluding cost of Fan Regulator complete as required and as per theDirection of Engineer-In-Charge. 1200 mm Sweep Ceiling Fan. |
| 192 | Supply, delivery, installation & testing of Electronic type Stepped Fan Regulator fixed on Existing Sheet Metal Switch Board including interconnections and making good the damages caused complete as required and as perDirection of Engineer-In-Charge. |
| 193 | Supply, delivery, installation & testing of following Sweep & Speed Exhaust Fan on Existing Sheet Metal Switch Board including loop connections and making good the damages caused complete as required and as per direction of Engineer-in-charge. 300mm Sweep 900RPM |
| 194 | Wall fan |
| 195 | First Aid Box |
| 196 | ABC type fire Exinguisher of 6kg |
AI Tender Summary
Tender Timeline
Oct 05, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 25, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 28, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender