Tender For Service Order For Dhds Ta Jobs 1 Lumpsum Jobs for DHDS TA 46518- Lump Sum 1 DESCRIPTION => : Lumpsum Jobs for DHDS TA Long Description: Lumpsum Jobs for DHDS TA As per Annexure-1 Srl. No. Line Description Ship To Location UOM Schedule Rate HSN Code Location GSTIN Unit rate jobs Manadatory: 1 1.a. Blinding and Deblinding - 46518- Inch - Dia 205.08 DESCRIPTION => : 1.a. Blinding and Deblinding - Long Description: 1.a. Blinding and Deblinding - Rate per inch dia As per Annexure-2 2 1.b. Blinding and De-blinding 46518- Inch - Dia 343.82 DESCRIPTION => : 1.b. Blinding and De-blinding Long Description: 1.b. Blinding and De-blinding with using Torque wrench / Bolt Tensioner - Rate per inch dia Annexure-2 3 2.a. Piping - CS Fillet joint 46518- Inch - Dia 258.5 DESCRIPTION => : 2.a. Piping - CS Fillet joint Long Description: 2.a. Piping - CS Fillet joint per inch dia (SMAW) As per Annexure-2 4 2.b. Piping - CS Fillet joint 46518- Inch - Dia 517 DESCRIPTION => : 2.b. Piping - CS Fillet joint Long Description: 2.b. Piping - CS Fillet joint per inch dia using IBR approved welder (SMAW) As per Annexure- 5 2.c. Piping - AS/SS Fillet joi 46518- Inch - Dia 761.98 DESCRIPTION => : 2.c. Piping - AS/SS Fillet joi Long Description: 2.c. Piping - AS/SS Fillet joint (SMAW) As per Annexure-2 6 2.d. Piping - Fillet joint Mon 46518- Inch - Dia 1330 DESCRIPTION => : 2.d. Piping - Fillet joint Mon Long Description: 2.d. Piping - Fillet joint Monel/inconel (SMAW) As per Annexure-2 7 2.e. Piping - CS Fillet joint 46518- Inch - Dia 592.96 DESCRIPTION => : 2.e. Piping - CS Fillet joint Long Description: 2.e. Piping - CS Fillet joint per inch dia (TiG) As per Annexure-2 8 2.f. Piping - AS/SS Fillet joi 46518- Inch - Dia 914.37 DESCRIPTION => : 2.f. Piping - AS/SS Fillet joi Long Description: 2.f. Piping - AS/SS Fillet joint (TiG) As per Annexure-2 9 2.g. Piping - Fillet joint Mon 46518- Inch - Dia 1757.5 DESCRIPTION => : 2.g. Piping - Fillet joint Mon Long Description: 2.g. Piping - Fillet joint Monel/inconel (TIG) As per Annexure-2 10 2.h. Piping - CS Butt joint no 46518- Inch - Dia 661.13 DESCRIPTION => : 2.h. Piping - CS Butt joint no Long Description: 2.h. Piping - CS Butt joint non X Ray quality for Utility Piping (SMAW) As per annexure-2 11 2.i. Piping - CS Butt joint X 46518- Inch - Dia 802.8 DESCRIPTION => : 2.i. Piping - CS Butt joint X Long Description: 2.i. Piping - CS Butt joint X Ray quality (Root Tig with SMAW Filler) As per annexure-2 12 2.j. Piping - CS Butt joint X 46518- Inch - Dia 944.47 DESCRIPTION => : 2.j. Piping - CS Butt joint X Long Description: 2.j. Piping - CS Butt joint X Ray quality (TiG) As per Annexure-2 13 2.k. Piping - CS Butt joint X 46518- Inch - Dia 1003 DESCRIPTION => : 2.k. Piping - CS Butt joint X Long Description: 2.k. Piping - CS Butt joint X Ray quality- using IBR approved welder (TiG) As per Annexure- 14 2.l. Piping - AS/SS Butt joint 46518- Inch - Dia 1287.75 DESCRIPTION => : 2.l. Piping - AS/SS Butt joint Long Description: 2.l. Piping - AS/SS Butt joint (TiG root and filler by SMAW) As per Annexure-2 15 2.m. Piping - AS/SS Butt joint 46518- Inch - Dia 1515 DESCRIPTION => : 2.m. Piping - AS/SS Butt joint Long Description: 2.m. Piping - AS/SS Butt joint (TiG) As per Annexure-2 16 2.n. Piping - Butt joint Monel 46518- Inch - Dia 1346.64 DESCRIPTION => : 2.n. Piping - Butt joint Monel Long Description: 2.n. Piping - Butt joint Monel/inconel-X ray quality (TIG root and filler by SMAW) As per Annexure- 17 2.o. Piping - Butt joint Monel 46518- Inch - Dia 1584.28 DESCRIPTION => : 2.o. Piping - Butt joint Monel Long Description: 2.o. Piping - Butt joint Monel/inconel- X ray quality (TiG) As per Annexure-2 18 2.p. Piping - CS Corrosion pad 46518- Inch - Dia 259.83 DESCRIPTION => : 2.p. Piping - CS Corrosion pad Long Description: 2.p. Piping - CS Corrosion pad per inch dia As per Annexure-2 19 2.q Piping - CS Corrosion pad 46518- Inch - Dia 337.12 DESCRIPTION => : 2.q Piping - CS Corrosion pad Long Description: 2.q Piping - CS Corrosion pad with shoe per inch dia As per Annexure-2 20 2.r. Piping - AS/SS Corrosion 46518- Inch - Dia 765 DESCRIPTION => : 2.r. Piping - AS/SS Corrosion Long Description: 2.r. Piping - AS/SS Corrosion pad per inch dia As per Annexure-2 21 2.s. Piping - AS/SS Corrosion 46518- Inch - Dia 996 DESCRIPTION => : 2.s. Piping - AS/SS Corrosion Long Description: 2.s. Piping - AS/SS Corrosion pad with shoe. Rate payable per Inch dia As per Annexure-2 22 2.t. Wrap coating using Pykot 46518- Square Meters 809.29 DESCRIPTION => : 2.t. Wrap coating using Pykot Long Description: 2.t. Wrap coating using Pykote of 4 mm thickness in two layer of 2 mm- including supply/apply Pypkote, sparktesting, grit blasting, painting of Inorganic Zinc Silicate of 65 micron DFT As per Annexure-2 23 2.u. Nozzle replacement/provis 46518- Inch - Dia 1902 DESCRIPTION => : 2.u. Nozzle replacement/provis Long Description: 2.u. Nozzle replacement/provision, Rate per inch dia. of nozzle pipe welded As per Annexure- 24 2.v. CS Gusset fabrication n w 46518- Each 114 DESCRIPTION => : 2.v. CS Gusset fabrication n w Long Description: 2.v. CS Gusset fabrication n welding per drain or vent line of piping or equipment. Rate per gusset per Annexure-2 25 2.w. AS/SS Gusset fabrication 46518- Each 171 DESCRIPTION => : 2.w. AS/SS Gusset fabrication Long Description: 2.w. AS/SS Gusset fabrication n welding per drain or vent line of piping or equipment. Rate per As per Annexure-2 26 2.x. Piping - CS RF pad per in 46518- Inch - Dia 696.89 DESCRIPTION => : 2.x. Piping - CS RF pad per in Long Description: 2.x. Piping - CS RF pad per inch dia using electrical operated machine. Rate is per inch dia of Per Annexure-2 27 2.y. Piping - AS/SS RF pad per 46518- Inch - Dia 1816 DESCRIPTION => : 2.y. Piping - AS/SS RF pad per Long Description: 2.y. Piping - AS/SS RF pad per inch dia using electrical operated machine. Rate is per inch dia pipe. As per Annexure-2 28 2.z. Non-pressurized piping we 46518- Inch - Dia 181.74 Yes DESCRIPTION => : 2.z. Non-pressurized piping we Long Description: 2.z. Non-pressurized piping welding joint As per Annexure-2 29 2.aa. Grit Blasting 46518- Square Meters 620.99 Yes DESCRIPTION => : 2.aa. Grit Blasting Long Description: 2.aa. Grit Blasting As per Annexure-2 30 2.bb. Primer Painting - Inorga 46518- Square Meters 286.72 Yes DESCRIPTION => : 2.bb. Primer Painting - Inorga Long Description: 2.bb. Primer Painting - Inorganic Zinc Silicate As per Annexure-2 31 2.cc. Primer Painting - Zinc P 46518- Square Meters 132.27 Yes DESCRIPTION => : 2.cc. Primer Painting - Zinc P Long Description: 2.cc. Primer Painting - Zinc Phosphate As per Annexure-2 32 2.dd. Primer Painting - Epoxy 46518- Square Meters 954.2 Yes DESCRIPTION => : 2.dd. Primer Painting - Epoxy Long Description: 2.dd. Primer Painting - Epoxy coal tar for heater floor and casing plate As per Annexure-2 33 3.a. Dye penetrant Test , Rate 46518- Inch - Dia 156 Yes DESCRIPTION => : 3.a. Dye penetrant Test , Rate Long Description: 3.a. Dye penetrant Test , Rate per Inch dia of DP test done As per Annexure-2 34 3.b. Dye penetrant Test , Rate 46518- Running Feet 588 Yes DESCRIPTION => : 3.b. Dye penetrant Test , Rate Long Description: 3.b. Dye penetrant Test , Rate per Running Feet for of DP test done on piping and other areas As per Annexure- 2 35 3.c. Dye penetrant Test , Rate 46518- Square Meters 7303.5 Yes DESCRIPTION => : 3.c. Dye penetrant Test , Rate Long Description: 3.c. Dye penetrant Test , Rate per Sq Meter of DP test done for Exchnager Tube sheets and other areas As per Annexure-2 36 3.d. WFMPT, Rate per Inch dia 46518- Inch - Dia 234 Yes DESCRIPTION => : 3.d. WFMPT, Rate per Inch dia Long Description: 3.d. WFMPT, Rate per Inch dia of WFMPT done As per Annexure-2 37 4.a. Radiography on piping wit 46518- Inch - Dia 253 Yes DESCRIPTION => : 4.a. Radiography on piping wit Long Description: 4.a. Radiography on piping with Iridium Source, Rate per Inch Dia of weld joint As per Anneuxre-2 38 4.b. Radiography on piping or 46518- Running Feet 1358 Yes DESCRIPTION => : 4.b. Radiography on piping or Long Description: 4.b. Radiography on piping or any other weld with Iridium Source, Rate per R Feet of weld joint As per Annexure-2 39 4.d. Radiography on piping wit 46518- Inch - Dia 379.5 Yes DESCRIPTION => : 4.d. Radiography on piping wit Long Description: 4.d. Radiography on piping with Selenium Source (Closed Proximity Radiography), Rate per Inch Dia of weld joint As per Annexure-2 40 4.e. Radiography on piping or 46518- Running Feet 2037 Yes DESCRIPTION => : 4.e. Radiography on piping or Long Description: 4.e. Radiography on piping or any other weld with Selenium Source (Closed Proximity Radiography), Rate per R Feet of weld joint As per Annexure-2 41 4.g. Mobilization Charges for 46518- Per Shift 6000 Yes DESCRIPTION => : 4.g. Mobilization Charges for Long Description: 4.g. Mobilization Charges for Digital Radiography Film Processing Equipment, Rate is per 12 hours shift. As per Annexure-2 42 4.h. Radiography film devolopm 46518- Each 150 Yes DESCRIPTION => : 4.h. Radiography film devolopm Long Description: 4.h. Radiography film devolopment with Digital Radiography Processing Equipment, Rate per Each Image Devoloped As per Annexure-2 43 5.a. Stress relieving done usi 46518- Inch - Dia 518.18 Yes DESCRIPTION => : 5.a. Stress relieving done usi Long Description: 5.a. Stress relieving done using electrical power source. Rate is per Inch dia of weld joint As Per Annexure-2 44 5.b. Stress relieving done usi 46518- Running Feet 1431 Yes DESCRIPTION => : 5.b. Stress relieving done usi Long Description: 5.b. Stress relieving done using electrical power source. Rate is per R Feet of weld joint As per Annexure-2 45 5.c. Stress relieving done usi 46518- Square Meters 10082 Yes DESCRIPTION => : 5.c. Stress relieving done usi Long Description: 5.c. Stress relieving done using electrical power source. Rate is per Sq Meter of Tube sheet/Surface Area As per Annexure-2 46 6. Ultrasonic flaw detection t 46518- Shift 5491.5 Yes DESCRIPTION => : 6. Ultrasonic flaw detection t Long Description: 6. Ultrasonic flaw detection test. Rate per 12 hrs of UFDT done at site As per Annexure-2 47 7.a. Overlay patch work (Rate 46518- Square Feet 1378 Yes DESCRIPTION => : 7.a. Overlay patch work (Rate Long Description: 7.a. Overlay patch work (Rate per Sq.Foot) - CS overlay patch per Square foot of 6 mm thick As per Annexure-2 48 7.b. Overlay patch work (Rate 46518- Square Feet 2771 Yes DESCRIPTION => : 7.b. Overlay patch work (Rate Long Description: 7.b. Overlay patch work (Rate per Sq.Foot) -SS overlay patch per Square foot of 6 mm thick As per Annexure- 2 49 8.a. Inlay patch work - CS Inl 46518- Square Feet 3069 Yes DESCRIPTION => : 8.a. Inlay patch work - CS Inl Long Description: 8.a. Inlay patch work - CS Inlay patch per Square foot of 6 mm thick As per Annexure-2 50 8.b. Inlay patch work - SS Inl 46518- Square Feet 7611 Yes DESCRIPTION => : 8.b. Inlay patch work - SS Inl Long Description: 8.b. Inlay patch work - SS Inlay patch per Square foot of 6 mm thick As per Annexure-2 51 9. Replacement of casing plate 46518- Square Feet 2104 Yes DESCRIPTION => : 9. Replacement of casing plate Long Description: 9. Replacement of casing plates 8 mm thk. Rate per Square feet of replacement done As Per Annexure-2 52 10.a. Weld build up CS – upto 46518- Square Inches 160.5 Yes DESCRIPTION => : 10.a. Weld build up CS – upto Long Description: 10.a. Weld build up CS – upto 1000 sq inches As per Annexure-2 53 10.b. Weld build up CS – from 46518- Square Inches 117.7 Yes DESCRIPTION => : 10.b. Weld build up CS – from Long Description: 10.b. Weld build up CS – from 1001 sq inches to 3000 sq inches As per Annexure-2 54 10.c. Weld build up CS – from 46518- Square Inches 85.6 Yes DESCRIPTION => : 10.c. Weld build up CS – from Long Description: 10.c. Weld build up CS – from 3001 sq inches to 5000 sq inches As per Annexure-2 55 10.d. Weld build up CS – from 46518- Square Inches 53.5 Yes DESCRIPTION => : 10.d. Weld build up CS – from Long Description: 10.d. Weld build up CS – from 5001 sq inches to 10000 sq inches As per Annexure-2 56 10.e. Weld build up CS – above 46518- Square Inches 42.8 Yes DESCRIPTION => : 10.e. Weld build up CS – above Long Description: 10.e. Weld build up CS – above 10000 sq inches As per Annexure-2 57 10.f. Weld build up AS / SS (A 46518- Square Inches 385.2 Yes DESCRIPTION => : 10.f. Weld build up AS / SS (A Long Description: 10.f. Weld build up AS / SS (All Varieties included) – upto 1000 sq inches As per Annexure-2 58 10.g. Weld build up AS / SS (A 46518- Square Inches 267.5 Yes DESCRIPTION => : 10.g. Weld build up AS / SS (A Long Description: 10.g. Weld build up AS / SS (All Varieties included) – from 1001 sq inches to 3000 sq inches As per Annexure-2 59 10.h. Weld build up AS / SS (A 46518- Square Inches 192.6 Yes DESCRIPTION => : 10.h. Weld build up AS / SS (A Long Description: 10.h. Weld build up AS / SS (All Varieties included) – from 3001 sq inches to 5000 sq inches As per Annexure-2 60 10.i. Weld build up AS / SS (A 46518- Square Inches 117.7 Yes DESCRIPTION => : 10.i. Weld build up AS / SS (A Long Description: 10.i. Weld build up AS / SS (All Varieties included) – from 5001 sq inches to 10000 sq inches As per Annexure-2 61 10.j. Weld build up AS / SS (A 46518- Square Inches 94.16 Yes DESCRIPTION => : 10.j. Weld build up AS / SS (A Long Description: 10.j. Weld build up AS / SS (All Varieties included) – above 10000 sq inches As per Annexure-2 62 10.k. Weld build up DSS/SDSS – 46518- Square Inches 310.3 Yes DESCRIPTION => : 10.k. Weld build up DSS/SDSS – Long Description: 10.k. Weld build up DSS/SDSS – upto 1000 sq inches As per Annexure-2 63 10.l. Weld build up DSS/SDSS – 46518- Square Inches 224.7 Yes DESCRIPTION => : 10.l. Weld build up DSS/SDSS – Long Description: 10.l. Weld build up DSS/SDSS – from 1001 sq inches to 3000 sq inches As per Annexure-2 64 10.m. Weld build up DSS/SDSS – 46518- Square Inches 160.5 Yes DESCRIPTION => : 10.m. Weld build up DSS/SDSS – Long Description: 10.m. Weld build up DSS/SDSS – from 3001 sq inches to 5000 sq inches As per Annexure-2 65 10.n. Weld build up DSS/SDSS – 46518- Square Inches 96.3 Yes DESCRIPTION => : 10.n. Weld build up DSS/SDSS – Long Description: 10.n. Weld build up DSS/SDSS – from 5001 sq inches to 10000 sq inches As per Annexure-2 66 10.o. Weld build up DSS/SDSS – 46518- Square Inches 77.04 Yes DESCRIPTION => : 10.o. Weld build up DSS/SDSS – Long Description: 10.o. Weld build up DSS/SDSS – above 10000 sq inches As per Annexure-2 67 10.p. Weld build up Monel/Inco 46518- Square Inches 406.6 Yes DESCRIPTION => : 10.p. Weld build up Monel/Inco Long Description: 10.p. Weld build up Monel/Inconel – upto 1000 sq inches As per Annexure-2 68 10.q. Weld build up Monel/Inco 46518- Square Inches 288.9 Yes DESCRIPTION => : 10.q. Weld build up Monel/Inco Long Description: 10.q. Weld build up Monel/Inconel – from 1001 sq inches to 3000 sq inches As per annexure-2 69 10.r. Weld build up Monel/Inco 46518- Square Inches 203.3 Yes DESCRIPTION => : 10.r. Weld build up Monel/Inco Long Description: 10.r. Weld build up Monel/Inconel – from 3001 sq inches to 5000 sq inches As per Annexure-2 70 10.s. Weld build up Monel/Inco 46518- Square Inches 128.4 Yes DESCRIPTION => : 10.s. Weld build up Monel/Inco Long Description: 10.s. Weld build up Monel/Inconel – from 5001 sq inches to 10000 sq inches As per Annexure-2 71 10.t. Weld build up Monel/Inco 46518- Square Inches 102.72 Yes DESCRIPTION => : 10.t. Weld build up Monel/Inco Long Description: 10.t. Weld build up Monel/Inconel – above 10000 sq inches As per Annexure-2 72 10.u. Weld build up with HPCL 46518- Square Inches 248.24 Yes DESCRIPTION => : 10.u. Weld build up with HPCL Long Description: 10.u. Weld build up with HPCL Supplied Electrode – upto 1000 sq inches As per Annexure-2 73 10.v. Weld build up with HPCL 46518- Square Inches 179.76 Yes DESCRIPTION => : 10.v. Weld build up with HPCL Long Description: 10.v. Weld build up with HPCL Supplied Electrode – from 1001 sq inches to 3000 sq inches As per annexure-2 74 10.w. Weld build up with HPCL 46518- Square Inches 128.4 Yes DESCRIPTION => : 10.w. Weld build up with HPCL Long Description: 10.w. Weld build up with HPCL Supplied Electrode – from 3001 sq inches to 5000 sq inches As per annexure-2 75 10.x. Weld build up with HPCL 46518- Square Inches 77.04 Yes DESCRIPTION => : 10.x. Weld build up with HPCL Long Description: 10.x. Weld build up with HPCL Supplied Electrode – from 5001 sq inches to 10000 sq inches As per Annexure-2 76 10.y. Weld build up with HPCL 46518- Square Inches 61.63 Yes DESCRIPTION => : 10.y. Weld build up with HPCL Long Description: 10.y. Weld build up with HPCL Supplied Electrode – above 10000 sq inches As per Annexure-2 77 10.z. Weld build up with Alloy 46518- Square Inches 1270 Yes DESCRIPTION => : 10.z. Weld build up with Alloy Long Description: 10.z. Weld build up with Alloy 59 ( ENiCrMo-3) electrodes per Sq.Inch of 3mm thick As per Annexure-2 78 10.aa. Weld run job. CS Weld r 46518- Running Feet 235.09 Yes DESCRIPTION => : 10.aa. Weld run job. CS Weld r Long Description: 10.aa. Weld run job. CS Weld run with E-7018 electrode per running foot of 5mm wide and 3 mm thk. As per Annexure-2 79 10.bb.Weld run job. SS Weld ru 46518- Running Feet 436.15 Yes DESCRIPTION => : 10.bb.Weld run job. SS Weld ru Long Description: 10.bb.Weld run job. SS Weld run with E-304/308/309/310 electrode per running foot of 5mm wide and 3 mm thk As per Annexure-2 80 10.cc.Weld run job. SS Weld ru 46518- Running Feet 528.19 Yes DESCRIPTION => : 10.cc.Weld run job. SS Weld ru Long Description: 10.cc.Weld run job. SS Weld run with E-309Mo/385/316/316L electrode per running foot of 5mm wide and 3 mm thk. As per annexure-2 81 10.dd.Weld run job. Monel Weld 46518- Running Feet 781.1 Yes DESCRIPTION => : 10.dd.Weld run job. Monel Weld Long Description: 10.dd.Weld run job. Monel Weld run with Monel/Copper Nickel electrode per running foot of 5mm wide and 3 mm thk. As per Annexure-2 82 11.a. Weld build up jobs (stru 46518- Square Inches 142.05 Yes DESCRIPTION => : 11.a. Weld build up jobs (stru Long Description: 11.a. Weld build up jobs (structural) - Weld build up with E-7018 electrodes per Sq. inch of 3mm thick As per annexure-2 83 12.a.System Scaffolding - Upto 46518- Block 1178.42 Yes DESCRIPTION => : 12.a.System Scaffolding - Upto Long Description: 12.a.System Scaffolding - Upto 6 mtr. from Ground Level - Per block of size 2.5m (Width) x 2.5m (Breadth) x 3m (Height) erected and dismantled for the heights up to 6 mtr. from the ground level. As per Annexure-2 84 12.b.System Scaffolding -above 46518- Block 1473.53 Yes DESCRIPTION => : 12.b.System Scaffolding -above Long Description: 12.b.System Scaffolding -above 6 mtr. N upto 12 mtr. From Ground Level - Per block of size 2.5m (Width) x 2.5m (Breadth) x 3m (Height) erected and dismantled for the heights up to 6 mtr. From the ground level. As per annexure-2 85 12.c. System Scaffolding -12.c 46518- Block 1765.62 Yes DESCRIPTION => : 12.c. System Scaffolding -12.c Long Description: 12.c. System Scaffolding -12.c. System Scaffolding - above 12 mtr. From Ground Level - Per block of size 2.5m (Width) x 2.5m (Breadth) x 3m (Height) erected and dismantled for the heights up to 6 mtr. from the ground level. As per annexure-2 86 12.d. System Scaffolding - Ins 46518- Block 1290.45 Yes DESCRIPTION => : 12.d. System Scaffolding - Ins Long Description: 12.d. System Scaffolding - Inside the Furnaces/Columns/Vessels etc. - Upto 6 mtr. From Floor Level - Rate Per Block of size upto 2.5m x 2.5m x 3m As per annexure-2 87 12.e. System Scaffolding - Ins 46518- Block 1612.56 Yes DESCRIPTION => : 12.e. System Scaffolding - Ins Long Description: 12.e. System Scaffolding - Inside the Furnaces/Columns/Vessels etc - above 6 mtr. N upto 12 mtr. from Ground Level - Rate Per Block of size upto 2.5m x 2.5m x 3m As per annexure-2 88 12.f. System Scaffolding - Ins 46518- Block 1935.68 Yes DESCRIPTION => : 12.f. System Scaffolding - Ins Long Description: 12.f. System Scaffolding - Inside the Furnaces/Columns/Vessels etc - above 12 mtr. from Floor Level - Rate Per Block of size upto 2.5m x 2.5m x 3m As per annexure-2 89 12.g. Stack Scaffolding - Appl 46518- Block 2579.9 Yes DESCRIPTION => : 12.g. Stack Scaffolding - Appl Long Description: 12.g. Stack Scaffolding - Applicable for no. of blocks erected n dismantled beyond the 30 meters height from the ground level. As per annexure-2 90 13. Cement lining repairs of v 46518- Square Feet 543.19 Yes DESCRIPTION => : 13. Cement lining repairs of v Long Description: 13. Cement lining repairs of vessels. Rate per sft of cement lining replaced. As per annexure-2 91 14. Repair & Replacement of SS 46518- Square Feet 699.57 Yes DESCRIPTION => : 14. Repair & Replacement of SS Long Description: 14. Repair & Replacement of SS Perforated sheets of burners plenum boxes, Rate payable is per sq.ft of perforated plate replaced As per annexure-2 92 15.a. Cement lined pipe replac 46518- Inch - Dia 604.84 Yes DESCRIPTION => : 15.a. Cement lined pipe replac Long Description: 15.a. Cement lined pipe replacement, Rate per inch Dia of Collar joint using Nito Bond As per Annexure-2 93 16.a Fabrication of pipie fabr 46518- Inch - Dia 180.06 Yes DESCRIPTION => : 16.a Fabrication of pipie fabr Long Description: 16.a Fabrication of pipie fabricated reducer for salt water piping -Rate is per inch dia of reducer fabricated - Full SMAW As per Annexure-2 94 17.a Cement lining of Straight 46518- Inch Meter 70.02 Yes DESCRIPTION => : 17.a Cement lining of Straight Long Description: 17.a Cement lining of Straight Pipes , Rate payable is per Inch meter (Water Curing) As per annexure-2 95 17.b Cement lining of Straight 46518- Inch Meter 60.02 Yes DESCRIPTION => : 17.b Cement lining of Straight Long Description: 17.b Cement lining of Straight Pipes , Rate payable is per Inch meter (Steam Curing) As per annexure-2 96 17.c Cement lining of Elbows / 46518- Inch Meter 104.03 Yes DESCRIPTION => : 17.c Cement lining of Elbows / Long Description: 17.c Cement lining of Elbows / Mitres, Tees, Reducers , Rate payable is per Inch meter (water curing) As per annexure-2 97 17.d Cement lining of Elbows / 46518- Inch Meter 95.67 Yes DESCRIPTION => : 17.d Cement lining of Elbows / Long Description: 17.d Cement lining of Elbows / Mitres, Tees, Reducers, Rate payable is per Inch meter (Steam Curing) As per annexure-2 98 17.e. Cement Lining touch ups 46518- Square Meters 1008.73 Yes DESCRIPTION => : 17.e. Cement Lining touch ups Long Description: 17.e. Cement Lining touch ups As per annexure-2 99 18.a. Replacement of structura 46518- Metric Ton 27414.72 Yes DESCRIPTION => : 18.a. Replacement of structura Long Description: 18.a. Replacement of structural steel using electrical operated machine. Rate per ton structural steel installed. Structural material supplied by HPCL. Rate per Ton Steel Dismantled and installed with new items As per Annexure-2 100 18.b. Replacement of structura 46518- Metric Ton 127942.37 Yes DESCRIPTION => : 18.b. Replacement of structura Long Description: 18.b. Replacement of structural steel using electrical operated machine. Rate per ton structural steel installed. Structural material supplied by agency. Rate per Ton Steel Supplied, Dismantled and installed with new items As per Annexure-2 101 18.c. Dismantling of structure 46518- Metric Ton 6015.13 Yes DESCRIPTION => : 18.c. Dismantling of structure Long Description: 18.c. Dismantling of structures. Rate per metric ton of structural dismantled As per Annexure-2 102 19. Rolling of plates. Rate pa 46518- Metric Ton 8530.02 Yes DESCRIPTION => : 19. Rolling of plates. Rate pa Long Description: 19. Rolling of plates. Rate payable per ton of plate rolled As per Annexure-2 103 20. Replacement of foundation 46518- Each 4510.6 Yes DESCRIPTION => : 20. Replacement of foundation Long Description: 20. Replacement of foundation bolts. Rate per foundation bolt replaced As per Annexure-2 104 21. SS strucutral fabrication. 46518- Kilograms 142.05 Yes DESCRIPTION => : 21. SS strucutral fabrication. Long Description: 21. SS structural fabrication. Rate payable per kg of SS structural fabricated n installed. As per annexure-2 105 22.a. Dropping and re-installa 46518- Inch - Dia 289.1 Yes DESCRIPTION => : 22.a. Dropping and re-installa Long Description: 22.a. Dropping and re-installation of relief valves. Rate payable is per inch dia of inlet size of relief valves removed and re-installed. As per annexure-2 106 22.b.Servicing n testing of PS 46518- Inch - Dia 2536.9 Yes DESCRIPTION => : 22.b.Servicing n testing of PS Long Description: 22.b.Servicing n testing of PSVs, Rate payable per inch dia of Inlet size As per annexure-2 107 23.a. Level Gauge Servicing. R 46518- Each 1261.45 Yes DESCRIPTION => : 23.a. Level Gauge Servicing. R Long Description: 23.a. Level Gauge Servicing. Rate payable is for each Level gauge (size < or = 2 segment LG) As per annexure-2 108 23.b Level Gauge Servicing. Ra 46518- Each 1803.64 Yes DESCRIPTION => : 23.b Level Gauge Servicing. Ra Long Description: 23.b Level Gauge Servicing. Rate payable is for each Level gauge (size >2 or <4 or = 4 segment LG) As per annexure-2 109 23.c. Level Gauge Servicing. R 46518- Each 2293.81 Yes DESCRIPTION => : 23.c. Level Gauge Servicing. R Long Description: 23.c. Level Gauge Servicing. Rate payable is for each Level gauge (size >4 or < 6 or = 6 segment LG) As per Annexure-2 110 24.a. Excavation. Rate per Cu 46518- Cubic Meters 260.09 Yes DESCRIPTION => : 24.a. Excavation. Rate per Cu Long Description: 24.a. Excavation. Rate per Cu meter of excavation done As per Annexure-2 111 24.b. Backfilling. Rate per Cu 46518- Cubic Meters 112.04 Yes DESCRIPTION => : 24.b. Backfilling. Rate per Cu Long Description: 24.b. Backfilling. Rate per Cu meter of back filling carried out As per annexure-2 112 24.c. Transportation of surplu 46518- Cubic Meters 360.13 Yes DESCRIPTION => : 24.c. Transportation of surplu Long Description: 24.c. Transportation of surplus earth. Rate per Cu meter of surplus earth transported As per Annexure-2 113 24.d. Dismantling of RCC.Rate 46518- Cubic Meters 3775.34 Yes DESCRIPTION => : 24.d. Dismantling of RCC.Rate Long Description: 24.d. Dismantling of RCC.Rate per Cu meter of RCC dismantled As per Annexure-2 114 24.e. Supply and filling of sa 46518- Cubic Meters 1211.43 Yes DESCRIPTION => : 24.e. Supply and filling of sa Long Description: 24.e. Supply and filling of sand. Rate per Cu meter of sand supplied and filled As per Annexure-2 115 24.f. RCC works 1: 1-1/2:3 Rat 46518- Cubic Meters 7769.76 Yes DESCRIPTION => : 24.f. RCC works 1: 1-1/2:3 Rat Long Description: 24.f. RCC works 1: 1-1/2:3 Rate per Cu meter of RCC works done As per Annexure -2 116 24.g. Reinforcement steel.Rate 46518- Metric Ton 75997.95 Yes DESCRIPTION => : 24.g. Reinforcement steel.Rate Long Description: 24.g. Reinforcement steel.Rate per metric ton of structural steel supplier and installed in position As per Annexure-2 117 24.h. Centering and shuttering 46518- Square Meters 457.16 Yes DESCRIPTION => : 24.h. Centering and shuttering Long Description: 24.h. Centering and shuttering. Rate per Sq meter of centering and shuttering done As per Annexure-2 118 24.i. Grouting. Rate per Cu me 46518- Cubic Meters 86542.69 Yes DESCRIPTION => : 24.i. Grouting. Rate per Cu me Long Description: 24.i. Grouting. Rate per Cu meter of grouting done As per Annexure-2 119 24.j. Shoring. Rate per Cu met 46518- Cubic Meters 564.2 Yes DESCRIPTION => : 24.j. Shoring. Rate per Cu met Long Description: 24.j. Shoring. Rate per Cu meter of Grouting done As per Annexure -2 120 24.k.Fireproofing of structure 46518- Cubic Meters 136982.58 Yes DESCRIPTION => : 24.k.Fireproofing of structure Long Description: 24.k.Fireproofing of structures. Rate per Cu meter of Fireproofing carried out As per Annexure-2 121 25.a. Replacement of Channel s 46518- Running Feet 1542.54 Yes DESCRIPTION => : 25.a. Replacement of Channel s Long Description: 25.a. Replacement of Channel section CS partition plate (10 mm thk). Rate per running feet of finished weld joint As per Annexure-2 122 25.b. Replacement of Channel s 46518- Running Feet 8407.98 Yes DESCRIPTION => : 25.b. Replacement of Channel s Long Description: 25.b. Replacement of Channel section NI-Al-Bronze / Monel partition plate. Rate per running feet of finished weld joint As per Annexure-2 123 25.c. Replacement of Channel s 46518- Running Feet 3085.08 Yes DESCRIPTION => : 25.c. Replacement of Channel s Long Description: 25.c. Replacement of Channel section AS/SS partition plate. Rate per running feet of finished weld joint As per Annexure-2 124 25.d. Replacement of Channel s 46518- Running Feet 2313.81 Yes DESCRIPTION => : 25.d. Replacement of Channel s Long Description: 25.d. Replacement of Channel section DSS/SDSS partition plate. Rate per running feet of finished weld joint As per Annexure-2 125 26. Replacement of liner plate 46518- Square Meters 192179.15 Yes DESCRIPTION => : 26. Replacement of liner plate Long Description: 26. Replacement of liner plates(3 mm thk) of Nickel Al Bronze /monel. Rate per Sq meter of liner plate replaced As per Annexure-2 126 27.a. Cold compound applicatio 46518- Square Meters 40941.52 Yes DESCRIPTION => : 27.a. Cold compound applicatio Long Description: 27.a. Cold compound application ; Supply and application for exchanger components n tubesheets after surface preparation.( Titanium Putty Base coat 1 mm n brushable ceramic top coat 1 mm) Rate payable is per sq mtr of coating done As per Annexure-2 127 27.b. Cold compound applicatio 46518- Square Meters 36847.07 Yes DESCRIPTION => : 27.b. Cold compound applicatio Long Description: 27.b. Cold compound application ; Supply and application for exchanger components n tubesheets after surface preparation.( Steel Putty Base coat 1 mm n brushable ceramic top coat 1 mm) Rate payable is per sq mtr of coating done As per Annexure-2 128 27.c. Cold compound applicatio 46518- Square Meters 21835.74 Yes DESCRIPTION => : 27.c. Cold compound applicatio Long Description: 27.c. Cold compound application ; Supply and application for exchanger components n tubesheets after surface preparation- brushable ceramic top coat 1 mm. Rate payable is per sq mtr of coating done As per Annexure-2 129 27.d: Cold compound applicatio 46518- Square Meters 19231.78 Yes DESCRIPTION => : 27.d: Cold compound applicatio Long Description: 27.d: Cold compound application ; Supply and application for exchanger components n tubesheets after surface preparation- Titanium Putty coat 1 mm . Rate payable is per sq mtr of coating done As per Annexure-2 130 27.e: Cold compound applicatio 46518- Square Meters 15110.11 Yes DESCRIPTION => : 27.e: Cold compound applicatio Long Description: 27.e: Cold compound application ; Supply and application for exchanger components n tubesheets after surface preparation- Steel Putty coat 1 mm . Rate payable is per sq mtr of coating done As per Annexure- 2 131 28.a. Re-tubing of exchangers 46518- Tube 466.64 Yes DESCRIPTION => : 28.a. Re-tubing of exchangers Long Description: 28.a. Re-tubing of exchangers and coolers; Ferrous Tubes. Rate per tube replaced by re-tubing for rolled tubes As per Annexure-2 132 28.b. Re-tubing of exchangers 46518- Tube 409.73 Yes DESCRIPTION => : 28.b. Re-tubing of exchangers Long Description: 28.b. Re-tubing of exchangers and coolers; Non-Ferrous Tubes. Rate per tube replaced by re-tubing for rolled tubes As per Annexure-2 133 28.c. Cage Assembling during R 46518- Cage 9240.61 Yes DESCRIPTION => : 28.c. Cage Assembling during R Long Description: 28.c. Cage Assembling during Re-tubing of exchangers and coolers. Rate per exchanger cage assembled As per Annexure-2 134 28.d. Rerolling of Exchanger t 46518- Joints 41.89 Yes DESCRIPTION => : 28.d. Rerolling of Exchanger t Long Description: 28.d. Rerolling of Exchanger tubes; Ferrous Tubes. Rate per Tube joint re-rolled As per Annexure-2 135 28.e. Rerolling of Exchanger t 46518- Joints 36.43 Yes DESCRIPTION => : 28.e. Rerolling of Exchanger t Long Description: 28.e. Rerolling of Exchanger tubes; Non-Ferrous Tubes. Rate per Tube joint re-rolled As per Annexure-2 136 29.a. Exchanger Machining: Mac 46518- Each 26394.94 Yes DESCRIPTION => : 29.a. Exchanger Machining: Mac Long Description: 29.a. Exchanger Machining: Machining of Exchanger Gasket Faces - Channel cover - up-to 500 mm Gasket OD As per Annexure-2 137 29.b. Exchanger Machining: Mac 46518- Each 39003.14 Yes DESCRIPTION => : 29.b. Exchanger Machining: Mac Long Description: 29.b. Exchanger Machining: Machining of Exchanger Gasket Faces - Channel cover - 501 mm to 1000 mm Gasket OD As per Annexure-2 138 29.c. Exchanger Machining: Mac 46518- Each 66180.95 Yes DESCRIPTION => : 29.c. Exchanger Machining: Mac Long Description: 29.c. Exchanger Machining: Machining of Exchanger Gasket Faces - Channel cover - 1001 mm to 1500mm Gasket OD As per Annexure-2 139 29.d. Exchanger Machining: Mac 46518- Each 33498.85 Yes DESCRIPTION => : 29.d. Exchanger Machining: Mac Long Description: 29.d. Exchanger Machining: Machining of Exchanger Gasket Faces - Channel section/Shell cover/Floating Head Cover up-to 500 mm Gasket OD As per Annexure-2 140 29.e. Exchanger Machining: Mac 46518- Each 50205.32 Yes DESCRIPTION => : 29.e. Exchanger Machining: Mac Long Description: 29.e. Exchanger Machining: Machining of Exchanger Gasket Faces - Channel section/Shell cover/Floating Head Cover - 501 mm to 1000 mm Gasket OD As per Annexure-2 141 29.f. Exchanger Machining: Mac 46518- Each 80583.58 Yes DESCRIPTION => : 29.f. Exchanger Machining: Mac Long Description: 29.f. Exchanger Machining: Machining of Exchanger Gasket Faces - Channel section / Shell cover/Floating Head Cover - 1001 mm to 1500 mm Gasket OD As per Annexure-2 142 29.g. Exchanger Machining: Mac 46518- Each 53405.77 Yes DESCRIPTION => : 29.g. Exchanger Machining: Mac Long Description: 29.g. Exchanger Machining: Machining of Exchanger Gasket Faces - Tube sheet along with bundle - up-to 500 mm Gasket OD As per Annexure-2 143 29.h. Exchanger Machining: Mac 46518- Each 66207.57 Yes DESCRIPTION => : 29.h. Exchanger Machining: Mac Long Description: 29.h. Exchanger Machining: Machining of Exchanger Gasket Faces - Tube sheet along with bundle - 501 mm to 1000 mm Gasket OD As per Annexure -2 144 29.i. Exchanger Machining: Mac 46518- Each 110009.57 Yes DESCRIPTION => : 29.i. Exchanger Machining: Mac Long Description: 29.i. Exchanger Machining: Machining of Exchanger Gasket Faces - Tube sheet along with bundle - 1001 mm to 1500 mm Gasket OD As per Annexure-2 145 29.j. Exchanger Machining: Mac 46518- Running Feet 1679.48 Yes DESCRIPTION => : 29.j. Exchanger Machining: Mac Long Description: 29.j. Exchanger Machining: Machining of Gasket Seating Slots (upto 20 mm wide) on Tube Sheets / Channel Covers of All Sizes n Thickness As per Annexure-2 146 30. In Situ Machining of flang 46518- Inch - Dia 28436 Yes DESCRIPTION => : 30. In Situ Machining of flang Long Description: 30. In Situ Machining of flanges. Rate payable is per inch dia of flange face machined. As per Annexure-2 147 31.a. Exchanger / Vessel Pneum 46518- Lump Sum 2014.51 Yes DESCRIPTION => : 31.a. Exchanger / Vessel Pneum Long Description: 31.a. Exchanger / Vessel Pneumatic test - all sizes As per Annexure-2 148 31.b. Repeat shell test- up-to 46518- Lump Sum 6271.19 Yes DESCRIPTION => : 31.b. Repeat shell test- up-to Long Description: 31.b. Repeat shell test- up-to 45 shell ID (without dropping components) As per Annexure-2 149 31.c. Repeat shell test- above 46518- Lump Sum 7838.98 Yes DESCRIPTION => : 31.c. Repeat shell test- above Long Description: 31.c. Repeat shell test- above 45 shell ID (without dropping components) As per Annexure-2 150 31.d. Tube test of exchanger – 46518- Lump Sum 6271.19 Yes DESCRIPTION => : 31.d. Tube test of exchanger – Long Description: 31.d. Tube test of exchanger – up to 45 shell ID (without dropping components) As per Annexure-2 151 31.e. Tube test of exchanger - 46518- Lump Sum 7838.98 Yes DESCRIPTION => : 31.e. Tube test of exchanger - Long Description: 31.e. Tube test of exchanger - above 45 shell ID (without dropping components) As per Annexure-2 152 31.f. Repeat shell test and tu 46518- Lump Sum 16070 Yes DESCRIPTION => : 31.f. Repeat shell test and tu Long Description: 31.f. Repeat shell test and tube test – upto 45 shell ID (with dropping components) As per Annexure-2 153 31.g. Repeat shell test and tu 46518- Lump Sum 23742.5 Yes DESCRIPTION => : 31.g. Repeat shell test and tu Long Description: 31.g. Repeat shell test and tube test - Above 45 shell ID (With dropping components) As per Annexure-2 154 31.h. Dropping, Gasket Replace 46518- Lump Sum 6270 Yes DESCRIPTION => : 31.h. Dropping, Gasket Replace Long Description: 31.h. Dropping, Gasket Replacement and Refixing of Floating Head cover or Channel cover- Upto 45 shell ID As per Annexure-2 155 31.i. Dropping, Gasket Replace 46518- Lump Sum 7165 Yes DESCRIPTION => : 31.i. Dropping, Gasket Replace Long Description: 31.i. Dropping, Gasket Replacement and Refixing of Floating Head cover or Channel cover - above 45 shell ID As per Annexure-2 156 31.j. Floating head gasket rep 46518- Lump Sum 17742.5 Yes DESCRIPTION => : 31.j. Floating head gasket rep Long Description: 31.j. Floating head gasket replacement (with tube test)- upto 45 shell ID As per Annexure-2 157 31.k. Floating head gasket rep 46518- Lump Sum 26417.5 Yes DESCRIPTION => : 31.k. Floating head gasket rep Long Description: 31.k. Floating head gasket replacement (with tube test) - Above 45 shell ID As per Annexure-2 158 31.l. Channel Section/Shell Co 46518- Lump Sum 5512.5 Yes DESCRIPTION => : 31.l. Channel Section/Shell Co Long Description: 31.l. Channel Section/Shell Cover dropping for repair and fixing back upto 35 dia As per Annexure-2 159 31.m. Channel Section/Shell Co 46518- Lump Sum 8086.25 Yes DESCRIPTION => : 31.m. Channel Section/Shell Co Long Description: 31.m. Channel Section/Shell Cover dropping for repair and fixing back abover 35 dia As per Annexure-2 160 31.n. Back shell test - Upto 4 46518- Lump Sum 4702.5 Yes DESCRIPTION => : 31.n. Back shell test - Upto 4 Long Description: 31.n. Back shell test - Upto 45 shell ID (without component dropping) As per Annexure-2 161 31.o. Back shell test - Above 46518- Lump Sum 7838.75 Yes DESCRIPTION => : 31.o. Back shell test - Above Long Description: 31.o. Back shell test - Above 45 shell ID (without component dropping) As per Annexure-2 162 31.p. Back Shell test - above 46518- Lump Sum 17742.5 Yes DESCRIPTION => : 31.p. Back Shell test - above Long Description: 31.p. Back Shell test - above 45 shell ID (with Bell/Shell cover dropping) As per Annexure-2 163 31.q. Back Shell test - upto 4 46518- Lump Sum 11455 Yes DESCRIPTION => : 31.q. Back Shell test - upto 4 Long Description: 31.q. Back Shell test - upto 45 shell ID (with Bell/Shell cover dropping) As per Annexure-2 164 31.r. Arresting exchanger gask 46518- Lump Sum 2216.25 Yes DESCRIPTION => : 31.r. Arresting exchanger gask Long Description: 31.r. Arresting exchanger gasket leak - Upto 45 shell ID As per Annexure-2 165 31.s. Arresting exchanger gask 46518- Lump Sum 4030 Yes DESCRIPTION => : 31.s. Arresting exchanger gask Long Description: 31.s. Arresting exchanger gasket leak - Above 45 shell ID As per Annexure-2 166 31.t. Arresting exchanger gask 46518- Lump Sum 36406 Yes DESCRIPTION => : 31.t. Arresting exchanger gask Long Description: 31.t. Arresting exchanger gasket leak - for all sizes using Torque wrench / Bolt Tensioner As per Annexure-2 167 31.u. Repeat Bundle removal an 46518- Lump Sum 23548 Yes DESCRIPTION => : 31.u. Repeat Bundle removal an Long Description: 31.u. Repeat Bundle removal and insertion As per Annexure-2 168 31.v. Repeat Differential tesi 46518- Lump Sum 11493 Yes DESCRIPTION => : 31.v. Repeat Differential tesi Long Description: 31.v. Repeat Differential tesitng of High pressure exchangers without dropping components As per Annexure-2 169 32. Hydrotest of loops.Rate pe 46518- Inch Meter 9.01 Yes DESCRIPTION => : 32. Hydrotest of loops.Rate pe Long Description: 32. Hydrotest of loops.Rate per inch dia.metre ( inch dia x meter length) As per Annexure-2 170 33. Replacement of gaskets. Ra 46518- Inch - Dia 81.03 Yes DESCRIPTION => : 33. Replacement of gaskets. Ra Long Description: 33. Replacement of gaskets. Rate per inch dia of piping As per Annexure-2 171 34. Suction Strainer Cleaning. 46518- Inch - Dia 98.03 Yes DESCRIPTION => : 34. Suction Strainer Cleaning. Long Description: 34. Suction Strainer Cleaning. Rate payable is for per Inch Dia (Pipe NB Dia) As per Annexure-2 172 35. Dropping n Re-installation 46518- Inch - Dia 322.12 Yes DESCRIPTION => : 35. Dropping n Re-installation Long Description: 35. Dropping n Re-installation of Control Valves. Rate per Inch Dia of valve. As per Annexure-2 173 36.a. Tray /down comer/seal pa 46518- Square Meters 1961.69 Yes DESCRIPTION => : 36.a. Tray /down comer/seal pa Long Description: 36.a. Tray /down comer/seal pan replacement. Rate per Sq.mtr As per Annexure-2 174 36.b.Tray/down comer/seal pan 46518- Kilograms 1253.45 Yes DESCRIPTION => : 36.b.Tray/down comer/seal pan Long Description: 36.b.Tray/down comer/seal pan fabrication. Rate per Kg of items fabricated n installed As per Annexure-2 175 36.c. Replacement of column we 46518- Square Feet 5191.85 Yes DESCRIPTION => : 36.c. Replacement of column we Long Description: 36.c. Replacement of column wear plate /chute plate. Rate per Sq feet of SS 410 S plate replaced including rolling As per Annexure-2 176 37. Dropping n Reinstallation 46518- Inch - Dia 281.1 Yes DESCRIPTION => : 37. Dropping n Reinstallation Long Description: 37. Dropping n Reinstallation of valves - Rate per inch diameter of valve size As per Annexure-2 177 38. Hydrojet cleaning of excha 46518- Tube 78.02 Yes DESCRIPTION => : 38. Hydrojet cleaning of excha Long Description: 38. Hydrojet cleaning of exchanger bundle, Rate per tube cleaned As per Annexure-2 178 39.a. Insulation Jobs - Remova 46518- Square Meters 85.03 Yes DESCRIPTION => : 39.a. Insulation Jobs - Remova Long Description: 39.a. Insulation Jobs - Removal of old insulation including cleaning for inspection, Rate Payable is per Sq Meter of insulation removed As per Annexure-2 179 39.b. Insulation Jobs - Provid 46518- Each 355.13 Yes DESCRIPTION => : 39.b. Insulation Jobs - Provid Long Description: 39.b. Insulation Jobs - Provide 3 inspection pocket and 3 window cap, Rate Payable is per insulation pockets removed As per Annexure-2 180 39.c. Insulation Jobs - Provid 46518- Each 532.19 Yes DESCRIPTION => : 39.c. Insulation Jobs - Provid Long Description: 39.c. Insulation Jobs - Provide 6 inspection pocket and 6 window cap, Rate Payable is per insulation pockets removed As per Annexure-2 181 39.d. Insulation Jobs - Thorou 46518- Square Meters 160.06 Yes DESCRIPTION => : 39.d. Insulation Jobs - Thorou Long Description: 39.d. Insulation Jobs - Thorough cleaning and supply n painting of 2 coats of heat resistant aluminum paint, Rate Payable is per Sq Meter of paint applied As per Annexure-2 182 39.e. Insulation Jobs - Supply 46518- Square Meters 203.07 Yes DESCRIPTION => : 39.e. Insulation Jobs - Supply Long Description: 39.e. Insulation Jobs - Supply and painting of Wrapping of 0.18mm aluminium foil, Rate Payable is per Sq Meter of wrapping done As per Annexure-2 183 39.f. Insulation Jobs - Supply 46518- Square Meters 239.09 Yes DESCRIPTION => : 39.f. Insulation Jobs - Supply Long Description: 39.f. Insulation Jobs - Supply and fixing of new LRB mineral wool - 50mm thick, Rate Payable is per Sq Meter of wool fixed As per Annexure-2 184 39.g. Insulation Jobs - Supply 46518- Square Meters 383.14 Yes DESCRIPTION => : 39.g. Insulation Jobs - Supply Long Description: 39.g. Insulation Jobs - Supply and fixing of new LRB mineral wool - 75.mm thick, Rate Payable is per Sq Meter of wool fixed As per Annexure-2 185 39.h. Insulation Jobs - Supply 46518- Square Meters 437.15 Yes DESCRIPTION => : 39.h. Insulation Jobs - Supply Long Description: 39.h. Insulation Jobs - Supply and fixing of new LRB mineral wool - 100mm thick, Rate Payable is per Sq Meter of wool fixed As per Annexure-2 186 39.i. Insulation Jobs - Supply 46518- Square Meters 525.19 Yes DESCRIPTION => : 39.i. Insulation Jobs - Supply Long Description: 39.i. Insulation Jobs - Supply and fixing of new LRB mineral wool - 125mm thick, Rate Payable is per Sq Meter of wool fixed As per Annexure-2 187 39.j. Insulation Jobs - Supply 46518- Square Meters 793.28 Yes DESCRIPTION => : 39.j. Insulation Jobs - Supply Long Description: 39.j. Insulation Jobs - Supply and fixing of new LRB mineral wool - 150mm thick, Rate Payable is per Sq Meter of wool fixed As per Annexure-2 188 39.k. Insulation Jobs - Supply 46518- Square Meters 641.23 Yes DESCRIPTION => : 39.k. Insulation Jobs - Supply Long Description: 39.k. Insulation Jobs - Supply n fix new Al plain sheet 22 SWG , Rate Payable is per Sq Meter of Al sheet fixed As per Annexure-2 189 39.l. Insulation Jobs - Supply 46518- Square Meters 738.26 Yes DESCRIPTION => : 39.l. Insulation Jobs - Supply Long Description: 39.l. Insulation Jobs - Supply n fix new Al corrugated sheet 22 SWG, Rate Payable is per Sq Meter of Al sheet fixed As per Annexure-2 190 39.m.Remove, Supply n fixing o 46518- Running Meter 309.11 Yes DESCRIPTION => : 39.m.Remove, Supply n fixing o Long Description: 39.m.Remove, Supply n fixing of rope insulation on 1/2 pipe Rate per running meter of pipeline As per Annexure-2 191 39.n.Remove , Supply n fixing 46518- Running Meter 454.16 Yes DESCRIPTION => : 39.n.Remove , Supply n fixing Long Description: 39.n.Remove , Supply n fixing of rope insulation on 0.75 pipe . Rate per running meter of pipeline As per Annexure-2 192 39.o.Remove , Supply n fixing 46518- Running Meter 600.21 Yes DESCRIPTION => : 39.o.Remove , Supply n fixing Long Description: 39.o.Remove , Supply n fixing of rope insulation on 1.0 pipe . Rate per running meter of pipeline As per Annexure-2 193 39.p.Remove, Supply n fixing o 46518- Running Meter 876.31 Yes DESCRIPTION => : 39.p.Remove, Supply n fixing o Long Description: 39.p.Remove, Supply n fixing of rope insulation on 1.5 pipe.Rate per running meter of pipeline As per Annexure-2 194 39.q. Insulation Jobs -Provide 46518- Square Meters 203.07 Yes DESCRIPTION => : 39.q. Insulation Jobs -Provide Long Description: 39.q. Insulation Jobs -Provide moisture/vapor barrier, Rate Payable is per Sq Meter of coating done As per Annexure-2 195 39.r. Insulation Jobs - Cold I 46518- Square Meters 660.22 Yes DESCRIPTION => : 39.r. Insulation Jobs - Cold I Long Description: 39.r. Insulation Jobs - Cold Insulation - Supply and fixing of 25 mm thick PUF sections As per Annexure-2 196 39.s. Insulaiton Jobs - Cold I 46518- Square Meters 1101.8 Yes DESCRIPTION => : 39.s. Insulaiton Jobs - Cold I Long Description: 39.s. Insulaiton Jobs - Cold Insulation - Supply and fixing of 50 mm thick PUF sections As per Annexure-2 197 40.a. Casting of refractory - 46518- Square Meters 4659.66 Yes DESCRIPTION => : 40.a. Casting of refractory - Long Description: 40.a. Casting of refractory - Thickness of upto 75 mm, Rate per sq.mtr of casting done As per Annexure-2 198 40.b. Casting of refractory - 46518- Square Meters 7069.51 Yes DESCRIPTION => : 40.b. Casting of refractory - Long Description: 40.b. Casting of refractory - Thickness from 75 to 150 mm, Rate per sq.mtr of casting done As per Annexure-2 199 40.c. Casting of refractory - 46518- Square Meters 8418.99 Yes DESCRIPTION => : 40.c. Casting of refractory - Long Description: 40.c. Casting of refractory - Thickness >150 mm, Rate per sq.mtr of casting done As per Annexure-2 200 40.d Replacement of Ceramic Bl 46518- Square Meters 385.68 Yes DESCRIPTION => : 40.d Replacement of Ceramic Bl Long Description: 40.d Replacement of Ceramic Blanket Replacement Rate payable is per square meter of job done for thickness up to 50 mm As per Annexure-2 201 40.e. Refractory Touch up rep 46518- Square Meters 1039.76 Yes DESCRIPTION => : 40.e. Refractory Touch up rep Long Description: 40.e. Refractory Touch up repair jobs using Topcrete or As per Annexure-2 202 41.a. Chipping n Removal and G 46518- Square Meters 9359.96 Yes DESCRIPTION => : 41.a. Chipping n Removal and G Long Description: 41.a. Chipping n Removal and Gunning of Refractory (Thickness - Up to 3) As per Annexure-2 203 41.b. Chipping n Removal and G 46518- Square Meters 11231.95 Yes DESCRIPTION => : 41.b. Chipping n Removal and G Long Description: 41.b. Chipping n Removal and Gunning of Refractory (Thickness - Above 3) As per Annexure-2 204 42.a. Fabrication of SS anchor 46518- Each 77.03 Yes DESCRIPTION => : 42.a. Fabrication of SS anchor Long Description: 42.a. Fabrication of SS anchors, rate is per anchor fabricated. As per Annexure-2 205 42.b. Welding of SS anchors, r 46518- Each 219.08 Yes DESCRIPTION => : 42.b. Welding of SS anchors, r Long Description: 42.b. Welding of SS anchors, rate is per anchor welded. As per Annexure-2 206 42.c. Fabrication and solution 46518- Batch 20261.18 Yes DESCRIPTION => : 42.c. Fabrication and solution Long Description: 42.c. Fabrication and solution annealing of anchors, Rate per batch (500nos or part thereof) of anchors annealed. As per Annexure-2 207 43. Brick lining, rate per cu. 46518- Cubic Meters 16256.76 Yes DESCRIPTION => : 43. Brick lining, rate per cu. Long Description: 43. Brick lining, rate per cu.mtr of lining done As per Annexure-2 208 44.a. In Position replacement 46518- Inch - Dia 1416.71 Yes DESCRIPTION => : 44.a. In Position replacement Long Description: 44.a. In Position replacement of CS Heater Tubes - Both Radiant and Convection Section Tubes - Full Tig As per Annexure-2 209 44.b. In Position replacement 46518- Inch - Dia 2272.5 Yes DESCRIPTION => : 44.b. In Position replacement Long Description: 44.b. In Position replacement of AS / SS Heater Tubes - Both Radiant and Convection Section Tubes. PWHT extra - Full Tig As per Annexure-2 210 44.c. In Position repair of CS 46518- Inch - Dia 1062.53 Yes DESCRIPTION => : 44.c. In Position repair of CS Long Description: 44.c. In Position repair of CS Heater Tubes - Both Radiant and Convection Section Tubes - Full Tig As per Annexure-2 211 44.d. In Position repair of AS 46518- Inch - Dia 1704.38 Yes DESCRIPTION => : 44.d. In Position repair of AS Long Description: 44.d. In Position repair of AS / SS Heater Tubes - Both Radiant and Convection Section Tubes. PWHT extra - Full Tig As per Annexure-2 212 44.e. Replacement of Furnace t 46518- Tube 13501.79 Yes DESCRIPTION => : 44.e. Replacement of Furnace t Long Description: 44.e. Replacement of Furnace tube n return bend with weldolets. Per tube replaced (removal n reinstallation, excluding welding) As per Annexure-2 213 45. Replacement of Thermocoupl 46518- Each 7207.56 Yes DESCRIPTION => : 45. Replacement of Thermocoupl Long Description: 45. Replacement of Thermocouple with Inconel electrodes. Rate per thermocouple replaced As per Annexure-2 214 46.a. Supply of DG Welding set 46518- Shift 3575.27 Yes DESCRIPTION => : 46.a. Supply of DG Welding set Long Description: 46.a. Supply of DG Welding set, Rate payable per 12hrs shift As per Annexure-2 215 46.b. Supply of 110KV DG Set, 46518- Shift 19153 Yes DESCRIPTION => : 46.b. Supply of 110KV DG Set, Long Description: 46.b. Supply of 110KV DG Set, Rate payable per 12hrs shift As per Annexure-2 216 46.c. Supply of diesel air com 46518- Shift 16089 Yes DESCRIPTION => : 46.c. Supply of diesel air com Long Description: 46.c. Supply of diesel air compressor, rate per 12hrs shift of Air compressor operated As per Annexure-2 217 46.d Usage of gully sucker for 46518- Shift 17572 Yes DESCRIPTION => : 46.d Usage of gully sucker for Long Description: 46.d Usage of gully sucker for draining out oil/water/sludge/slurry from the unit, Rate per 12 hour shift of usage of gully sucker As per Annexure-2 218 46.e. Supply of necessary intr 46518- Hour 203.07 Yes DESCRIPTION => : 46.e. Supply of necessary intr Long Description: 46.e. Supply of necessary intrinsically safe De-Watering pumps of capacity 5 HP As per Annexure-2 219 47. Fabrication n Installation 46518- Square Feet 1072.46 Yes DESCRIPTION => : 47. Fabrication n Installation Long Description: 47. Fabrication n Installation of Burner Components,Rate payable is per sq.ft of plate replaced of the component As per Annexure-2 220 48.a Jobs on manpower basis (R 46518- Person 1854 Yes DESCRIPTION => : 48.a Jobs on manpower basis (R Long Description: 48.a Jobs on manpower basis (Rate per 12 Hrs shift) - a. CS welder As per Annexure-2 221 48.b. Jobs on manpower basis ( 46518- Person 2038 Yes DESCRIPTION => : 48.b. Jobs on manpower basis ( Long Description: 48.b. Jobs on manpower basis (Rate per 12 Hrs shift) - b. SS / Alloy steel welder As per Annexure-2 222 48.c Jobs on manpowerbasis (Ra 46518- Person 2038 Yes DESCRIPTION => : 48.c Jobs on manpowerbasis (Ra Long Description: 48.c Jobs on manpowerbasis (Rate per 12 Hrs shift) - c.Fabricator As per Annexure-2 223 48.d. Jobs on manpower basis ( 46518- Person 1854 Yes DESCRIPTION => : 48.d. Jobs on manpower basis ( Long Description: 48.d. Jobs on manpower basis (Rate per 12 Hrs shift) - d. Grinder As per Annexure-2 224 48.e. Jobs on manpower basis ( 46518- Person 1854 Yes DESCRIPTION => : 48.e. Jobs on manpower basis ( Long Description: 48.e. Jobs on manpower basis (Rate per 12 Hrs shift) - e. Gascutter As per Annexure-2 225 48.f. .Jobs on manpowerbasis ( 46518- Person 1854 Yes DESCRIPTION => : 48.f. .Jobs on manpowerbasis ( Long Description: 48.f. .Jobs on manpowerbasis (Rate per 12 Hrs shift) - g.Mason/Carpenter As per Annexure-2 226 48.g.Jobs on manpower basis (R 46518- Person 1854 Yes DESCRIPTION => : 48.g.Jobs on manpower basis (R Long Description: 48.g.Jobs on manpower basis (Rate per 12 Hrs shift) - h.Fitter As per Annexure-2 227 48.h. Jobs on manpowerbasis (R 46518- Person 1854 Yes DESCRIPTION => : 48.h. Jobs on manpowerbasis (R Long Description: 48.h. Jobs on manpowerbasis (Rate per 12 Hrs shift) - i.Rigger (Skilled) As per Annexure-2 228 48.i. Jobs on manpowerbasis (R 46518- Person 1582 Yes DESCRIPTION => : 48.i. Jobs on manpowerbasis (R Long Description: 48.i. Jobs on manpowerbasis (Rate per 12 Hrs shift) - i.khalasi (Semiskilled) As per Annexure-2 229 48.j. Jobs on manpowerbasis (R 46518- Person 1400 Yes DESCRIPTION => : 48.j. Jobs on manpowerbasis (R Long Description: 48.j. Jobs on manpowerbasis (Rate per 12 Hrs shift) - j.Helper As per Annexure-2 230 49.a. Valve servicing, Per Inc 46518- Inch - Dia 163.06 Yes DESCRIPTION => : 49.a. Valve servicing, Per Inc Long Description: 49.a. Valve servicing, Per Inch Dia of valve (all ratings) serviced without bonnet opening As per Annexure-2 231 49.b. Valve servicing,Per Inch 46518- Inch - Dia 1430.51 Yes DESCRIPTION => : 49.b. Valve servicing,Per Inch Long Description: 49.b. Valve servicing,Per Inch Dia of valve (all ratings) serviced with bonnet opening n gasket replacement As per Annexure-2 232 50.a. Seal welding of AS/SS Ex 46518- Tube 682.24 Yes DESCRIPTION => : 50.a. Seal welding of AS/SS Ex Long Description: 50.a. Seal welding of AS/SS Exchanger tube. Rate payable per tube welded at both ends As per Annexure-2 233 50.b. Seal welding of CS Excha 46518- Tube 665 Yes DESCRIPTION => : 50.b. Seal welding of CS Excha Long Description: 50.b. Seal welding of CS Exchanger tube. Rate payable per tube welded at both ends As per Annexure-2 234 50.c. Seal welding of DSS/SDSS 46518- Tube 764.75 Yes DESCRIPTION => : 50.c. Seal welding of DSS/SDSS Long Description: 50.c. Seal welding of DSS/SDSS Exchanger tube. Rate payable per tube welded at both ends As per Annexure-2 235 51.a. Hydrojet cleaning of AFC 46518- Tube 98.24 Yes DESCRIPTION => : 51.a. Hydrojet cleaning of AFC Long Description: 51.a. Hydrojet cleaning of AFC bundle, Rate per tube cleaned As per Annexure-2 236 51.b. Additional AFC Plug remo 46518- Each 113.07 Yes DESCRIPTION => : 51.b. Additional AFC Plug remo Long Description: 51.b. Additional AFC Plug removal n fixing As per Annexure-2 237 52.a. Seal welding of AFC Plug 46518- Each 424.61 Yes DESCRIPTION => : 52.a. Seal welding of AFC Plug Long Description: 52.a. Seal welding of AFC Plugs (TiG) - Carbon Steel (All varieties including LTCS). Rate payable shall be per AFC Plug welded As per Annexure-2 238 52.b. Seal welding of AFC Plug 46518- Each 607.02 Yes DESCRIPTION => : 52.b. Seal welding of AFC Plug Long Description: 52.b. Seal welding of AFC Plugs (TiG) - Alloy Steel (All varieties included). Rate payable shall be per AFC Plug welded As per Annexure-2 239 52.c. Seal welding of AFC Plug 46518- Each 607.02 Yes DESCRIPTION => : 52.c. Seal welding of AFC Plug Long Description: 52.c. Seal welding of AFC Plugs (TiG) - Austenitic Stainless Steel (All varieties included). Rate payable shall be per AFC Plug welded As per Annexure-2 240 52.d. Seal welding of AFC Plug 46518- Each 701.86 Yes DESCRIPTION => : 52.d. Seal welding of AFC Plug Long Description: 52.d. Seal welding of AFC Plugs (TiG) - Duplex Steel (All varieties including Super Duplex). Rate payable shall be per AFC Plug welded As per Annexure-2 241 52.e. Seal welding of AFC Plug 46518- Each 645.01 Yes DESCRIPTION => : 52.e. Seal welding of AFC Plug Long Description: 52.e. Seal welding of AFC Plugs (TiG) - Monel/Inconel. Rate payable shall be per AFC Plug welded As per Annexure-2 242 53.a. Constant Load / Variable 46518- Each 498.02 Yes DESCRIPTION => : 53.a. Constant Load / Variable Long Description: 53.a. Constant Load / Variable Load Spring Supports Servicing - Upto 8 Main pipe line size As per Annexure-2 243 53.b. Constant Load / Variable 46518- Each 996.04 Yes DESCRIPTION => : 53.b. Constant Load / Variable Long Description: 53.b. Constant Load / Variable Load Spring Supports Servicing - From 10 to 16 Main pipe line size As per Annexure-2 244 53.c. Constant Load / Variable 46518- Each 1494.06 Yes DESCRIPTION => : 53.c. Constant Load / Variable Long Description: 53.c. Constant Load / Variable Load Spring Supports Servicing - From 18 to 24 Main pipe line size As per Annexure -2 245 53.d. Constant Load / Variable 46518- Each 1992.08 Yes DESCRIPTION => : 53.d. Constant Load / Variable Long Description: 53.d. Constant Load / Variable Load Spring Supports Replacement - Upto 8 Main pipe line size As per Annexure-2 246 53.e. Constant Load / Variable 46518- Each 2988.12 Yes DESCRIPTION => : 53.e. Constant Load / Variable Long Description: 53.e. Constant Load / Variable Load Spring Supports Replacement - From 10 to 16 Main pipe line size As per Annexure-2 247 53.f. Constant Load / Variable 46518- Each 5976.24 Yes DESCRIPTION => : 53.f. Constant Load / Variable Long Description: 53.f. Constant Load / Variable Load Spring Supports Replacement - From 18 to 24 Main pipe line size As per Annexure-2 248 54. Flushing of Lines with any 46518- Inch Meter 6.53 Yes DESCRIPTION => : 54. Flushing of Lines with any Long Description: 54. Flushing of Lines with any Liquid Media As per Annexure-2 249 55. Carboard blasting of lines 46518- Inch - Dia 131.17 Yes DESCRIPTION => : 55. Carboard blasting of lines Long Description: 55. Carboard blasting of lines - per Blast with 6 mm thick carboard used. Blinding extra As per Annexure-2 250 56.a. Additional Hydrotest of 46518- Coils 34551.25 Yes DESCRIPTION => : 56.a. Additional Hydrotest of Long Description: 56.a. Additional Hydrotest of Tube Passes, Rate payable is for hydro testing of,One pass of Hydrocarbon coil of any heater As per Annexure-2 251 56.b..Additional Hydrotest of 46518- Coils 15360.45 Yes DESCRIPTION => : 56.b..Additional Hydrotest of Long Description: 56.b..Additional Hydrotest of Tube of one Passe Steam Coil,, Rate payable is for hydro testing of,One pass of steam coil As per Annexure-2 252 57.a. NDT, DCSECT of exchange r 46518- Per Shift 35000 Yes DESCRIPTION => : 57.a. NDT, DCSECT of exchanger Long Description: 57.a. NDT, DCSECT of exchanger tubes, the rate payable is per 12 Hrs. shift As per Annexure-2 253 57.b. ECT of exchanger tubes, 46518- Per Shift 25000 Yes DESCRIPTION => : 57.b. ECT of exchanger tubes, Long Description: 57.b. ECT of exchanger tubes, the rate payable is for ECT carried out, rate payable is per 12 hours shift As per Annexure-2 254 57.c. RVI of equipments, the r 46518- Per Shift 27250 Yes DESCRIPTION => : 57.c. RVI of equipments, the r Long Description: 57.c. RVI of equipments, the rate payable is for RVI carried out per 12 hr shift As per Annexure-2
