Support Activity In Jal Shakti Division Nahan In Tehsil Nahan Distt. Sirmour Hp C / O Sub Division Office Building 2Nd Floor
Tender Value
14.29 Lakhs
Estimated cost
Bid Submission
11 Oct 2021
0 days left
EMD
28600
Bank guarantee accepted
Document Fee
400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nahan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Support Activity In Jal Shakti Division Nahan In Tehsil Nahan Distt. Sirmour Hp C / O Sub Division Office Building 2Nd Floor
BOQ
| Sl. No. | Item Description |
| 1 | Brick work using common burnt clay building bricks in Super structure 2nd class in cm 1:6 (1 cement:6 sand) including of all leads, lifts and carriage of material at site and as directed by the Engineer -Incharge. |
| 2 | Providingwood work in frames of doors, windows and other frames wrought framed and fixed in position with second class deodar wood in all leads and lifts. |
| 3 | Providing and fixingwood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads and lifts. |
| 4 | Prov. & fixing wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85 G. with wire of dia. 0.56 mm for doors,windows & clerestrey windows including bright finished black enameled iron hinges with necessary screws.2nd class Deodar wood |
| 5 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the samefor insitu reinforced concrete and plain. |
| 6 | (i) Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness. |
| 7 | (ii) Vertical surfaces such as Horizontal Beam etc. upto 200mm kin thickness. |
| 8 | Providing Tor steel reinforcement for RCC work including bending,binding & placing in position complete upto floor two level. |
| 9 | Providing and laying cement concrete work 1:2:4(1cement:2sand: 4 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 10 | Suspended floors, roofs, landings and shelves and their supports, balconies, beams ,griders bressumers and cantilevers upto all floor level. |
| 11 | Providing and laying cement concrete work 1:1.5:3(1cement:1.50 sand: 3 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 12 | (a) Lintels, beams ,griders bressumers and cantilevers upto all floor level. |
| 13 | 6 mm cement plaster to ceiling in CM 1:4 (1Cement :4 Sand) including of all leads, lifts and carriage of material at site and as directed by the Engineer -Incharge. |
| 14 | 20mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar4 1:6(1cement:6sand) kin all leads and lifts. |
| 15 | Applying two coat of woodpreservative on new wood based surfaceafter and including preparing the surface by thoroughly cleaning dirt dust and other foreign matter. |
| 16 | Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughlycleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink in all leads and lifts. |
| 17 | Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and evenshade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts. |
| 18 | White washing with lime on undecorated walls surface (two coats) to give an even shade including thoroughly brooming the surface dirt dust mortar dirt and other foreign matter in all leads and lifts. |
| 19 | Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces (two coats) to give an even shade after thotoughly brushing the surface to remove all dirt & remains of loose powdered materials. |
| 20 | Providing and fixing M.S.fan clamp(Type-Iof 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete. |
| 21 | Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm (1:3:6(1cement:3sand:6 graded stone aggregate 20mm nominal size. |
| 22 | Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete |
| 23 | i) Sliding door bolts 300x16mm. |
| 24 | ii) Sliding door bolts 250x16mm. |
| 25 | (iii) M.S. tower bolts (Barrel type) leads and lifts. 200x10mm. |
| 26 | (iv) M.S. tower bolts (Barrel type) leads and lifts. 150x10mm. |
| 27 | (v) M.S. handles 150mm dia |
| 28 | (vi) M.S. handles 125mm dia |
| 29 | (vii) M.S. handles 100 mm dia |
| 30 | ( viii) Eye Hook |
| 31 | (ix) Hinges 100 mm |
| 32 | (x) Door Closer |
| 33 | (xi) Door Stopper |
| 34 | (xii) Chain with hook |
| 35 | Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm.thick cement mortar 1:3(1cement:3 sand) finished with flush pointing in white cement. |
| 36 | Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with with round headed bolts and nuts or by screws. |
| 37 | PROVIDING INTERNAL ELECTRICAL FITTING IN OFFICE BUILDING |
| 38 | wiring for light point/fan point/exaust fan point/call bell point with 1.5 sq.mm PVC insulated,PVC sheathed copper conductor cable in casing capping as required :Group-C complete in all respect and as directed by the Engr.incharge. |
| 39 | Ligth plug point on board with copper wiring in PVC conduit Wiring for 3 pin 5/6 amps.Plug point with 1.5 sq.mm PVC insulated copper conductor cable i/c P/F 3pin 5/6 amps.socket outlet on switch board(in surface/recessed PVC switch, earthing the 3rd pin,painting etc. as required,complete in all respect and as directed by the Engr.incharge. |
| 40 | Supplying & fixing Metal box of 180mm X 100 mmX 60mm deep(nominal size) on surface or recess with suitable size phenolic laminated sheet cover in the front including P/F 3 pin 15/16 amps. Socket outlet & 15/16 amps. Tumber/piano type switch, earthing the 3rd pin,painting etc.complete in all respect and as directed by the Engr.incharge. |
| 41 | Supplying & fixing bakelite batten/angle holder i/c connection complete in all respect and as directed by the Engr.incharge. |
| 42 | Providing, Installation,testing and commissioning of prewinded flourescent tube fitting complete with ballast starter and capacitor but excluding tube rod suitable to operate on 230 volts,single phase AC supply directly on surface with copper wiring as required.complete in all respect and as directed by the Engr.incharge.flourescent tube fixture,1X40 watt, box type.Catagory A |
| 43 | Supplying & fixing 5 amps.to 32 amps. Rating,240 volts,\"L\" series,miniature circuit breaker of following poles in existing MCB-DB complete with connection, testing & commissioning etc. as required (Category-B) complete in all respect and as directed by the Engr.incharge.Single Pole. |
| 44 | Supplying & fixing 40 amps to 63 amps Rating 240 volts \"L\" series,miniature circuit breaker of following poles in existing MCB-DB complete with connection, testing &commissioning etc. as required (Category-B) complete in all respect and as directed by the Engr.incharge. 63 Amps. Double Pole. |
| 45 | Supplying & fixing of following way, single pole & neutral sheet steel, MCB distribution board, 240 volts. On surface recess,complete with tinned copper,busher,neutral link,earth bar, din bar,detachable gland plate,inter connections,i/c painting,earthing etc.complete in all respect and as directed by the Engr.incharge.Bus-Bar :- 8 way. |
| 46 | Providing, Installation,testing and commissioning of ceilingfan & regulator, i/c wiring, the down rod of standard length(upto 30 cm.) with 1.5 sq.mm. PVC insulated copper conductor single core cable etc. as required,complete in all respect and as directed by the Engr.incharge.Ceiling fan 1200 mm sweep, Category-A |
| 47 | Circuit wiring in casing caping(2X1.5 sq.mm.) wiring for circuit wiringwith 2X1.5 sq.mm. PVC insulated,PVC sheathed copper conductor single core cable in PVC casing & capping as required. complete in all respect and as directed by the Engr.incharge. |
| 48 | wiring for light/power plug with 2X4 sq.mm.PVC insulated PVC sheathed, copper conductor,single core cable in PVC.casing & capping alongwith 1 no 2.24 mm. dia bare copper wire for loop earthing as required.complete in all respect and as directed by the Engr.incharge. |
| 49 | Wiring for sub main with following size of PVC sheathed,PVC insulated copper conductor single core cable in PVC casing capping as required and as directed by the Engr,inch. |
| 50 | Providing, Installation,testing and commissioning of Pre- winded street light fitting, complete with rod & other accessories, suitable to operate on 230 volts,single phase AC supply directly on surface with copper wiring as required.complete in all respect and as directed by the Engr.incharge. |
| 51 | Fixing to wall ceiling and floor glavanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor. i) 15mm nominal bore. |
| 52 | Providing and fixingsand cast / cast iron spun spigot and socket soil waste and ventilating pipes (lead chaulked joints to be measured and paid for separately). 80 mm nominal size. |
| 53 | Providing and fixingsand cast iron / cast iron spun fittings and sccessories. |
| 54 | Plain Bends (of required degree) 80mm dia |
| 55 | C.I bends ( required degree) with oval access door insertion rubber washer 2mm thick, bolts and nuts complete 80 mm dia |
| 56 | C.I Collar80 mm dia |
| 57 | Cast iron cowl 80 mm dia |
| 58 | Cast iron Door/Tee80 mm dia |
| 59 | P/F M.S. holder bats including steel bolts to sand cast iron/cast (spun) iron pipes embeded in and includind cement concrete blocks 100mmx100mmx100mm of 1:2:4 (1cement:2sand:4graded stone agg. 20mm nominal size) including cost of cutting holes and making good the walls for:- 80mm nominal diameter size pipe |
| 60 | Providing and fixing cast iron floor trap of self cleaning desin with sand castiron screwed down or hinged grating with out vent arm complete including cost of cutting and making good the wall and floor. 80mm nominal dia |
| 61 | Providing lead caulked joints to sand cast iron/ cast iron(spun) iron pipes and fittings including testing of joints.80 mm dia |
| 62 | Providing and fixing vitreous china water closet squatting pan (Indian type WC pan) size 580 mm ( earth work bed concrete, foot rest and trap to be measured and paid for separately)Orrissa Pattern |
| 63 | Providing and fixing PVC flushing cistern with complete fittings includings syphonic apparatus, mosquito proof lid, flusing pipe, CP brass unions and couplings for connections with inlet, outlet and over flow pipes including cutting holes and making good the same.PVC cistern 5liters capacity |
| 64 | Providing and fixing 100mm size \"P\" or \"S\" trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1(1 cement: 1 Sand).Sand cast iron |
| 65 | P/F viterous chaina wash basin with a single forpillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings :I) Flat back 630mmx450mm |
| 66 | Providing and fixing C.P. Brass chain 50 cm long and rubber plug of following sizes for sink or wash basin:- 32mm dia |
| 67 | Providing and fixing C.P. Brass waste for for sink or wash basin:- 32mm dia |
| 68 | Providing and fixing 80mm steel grating for gully, floor or Nahni trap |
| 69 | Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. |
| 70 | Providing and fixing Towell rail complete with C.P. brass brackets fixed to wooden plugs with C.P. Brass. 750x20mm |
| 71 | Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with with C.P. brass screws. |
| 72 | Providing and fixing C.P. Brass bib tap with capstan head15mm dia |
| 73 | Providing and fixing C.P. Brass Pillar bib tap with capstan head15mm dia |
| 74 | Providing and fixing C.P. brass stop cocks 15 mm dia |
| 75 | Construction main hole with RCC top in 1:2:4 (1cement:2sand:4graded stone agg. 20mm nominal size) foundation concrete 1:4:8 (1cement:4sand:8 graded stone agg. 40mm nominal size) in side plaster15mm thick with cement mortor 1:3 (1cement:3sand) plaster with floating coat of neat cement and making channel in cement concrete 1:2:4 (1cemeny:2sand:4graded stone 20mm nominal size and finished smooth complete including curing testing :Inside size 800mmx800mm amd 500mm deep including C.I. Cover with frame.( Light duty single sealpattern a) With 200mm thick walls of brick masonry I using common burnt cl;ay building bricks in cement mortor 1:3 (1cement: 3sand). |
| 76 | Providing and fixing PVC storage tankCof ISI 12701 marked G.I inlet connection 15 mm nominal bore ball valve and mosquitoproof locking arrangement including hosting upto all length above ground level 1000 Liters net capacity PVC stores tank |
| 77 | P/F vitrous China bowl pattren urinal including connection the urinal with waste pipe Flatback type of size 430x260x350mm |
| 78 | P/F CP brass flush pipe/spreading for urinal with fittings such as union clamps etc.32 mm nominal bore |
AI Tender Summary
Tender Timeline
Oct 04, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 11, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 11, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender