Bids Are invited for Cement - Ordinary Portland cement, 43 grade as per is: 269 (equivalent Ultratech, Ambuja, ACC, etc) Packing Material : HDPE/PP woven sacks conforming to IS 11652.Net quantity of cement per bag (in kg) : 50 Kg. , Prelaminated particle -Uttar Pradesh

Bids Are invited for Cement - Ordinary Portland cement, 43 grade as per is: 269 (equivalent Ultratech, Ambuja, ACC, etc) Packing Material : HDPE/PP woven sacks conforming to IS 11652.Net quantity of cement per bag (in kg) : 50 Kg. , Prelaminated particle board 12 mm - Prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade) 12 mm thick , CP shower Rose - Shower rose C.P. brass 15 mm Thickness of Ni-Cr coating- Not less than Service Condition Number 2 of Table 3 of IS 1068/1993 Types of Shower -Exposed Rain Showers Material- Cast Brass Grade LCB-2 of IS:292/1983;Inlet Length of Shower Pipe (mm) -150 millimeter;Shower Diameter / Length (mm) 100 mm. ; Weight of Water Shower in grams (+/- 50 GM) -300gram. ISI mark heavy duty like L&K; Parco; Jaquar ; or equivalent , CP brass pillar cock 15mm - CP brass pillar cock 15mm; Material of Body , Body Components, Capstan Head and Washer Plate :Cast Brass; Material of Spindle, Gland,Washer Plate and Nut :Brass; Minimum Finish Mass : 650 gm for 15 mm Nominal Size Pillar Tape; Nominal Size (mm)15 mm; Thickness of Ni-Cr Coating: Not less than Service Condition Number 2 of table 3 of IS 1068/1993 , CP brass bib cock 15 mm - CP brass bib cock 15 mm Material of body and Bonnet : Cast Brass;Finish : Polished Bright; Material of Gland, Crutch (handle), Washer Plate : Brass (Extruded, Rolled, Cast, die cast)Minimum Weight of Item (gram) : 400 gramNominal Size (mm)15 mm; Thickness of Ni-Cr Coating: Not less than Service Condition Number 2 of table 3 of IS 1068/1993 , CP angle cock 15mm - CP angle cock 15mm -tem and Shape : Angle Stop Valve; Material of Body , Body Components, Inlet tube,Nozzle, bonnet and back nut :Brass; Knob, Knob components. Divertor and Divertor Components :Brass; Nominal Size (mm)-15mm; Tap shall be Nickel Chrome Plated Thickness of Ni-Cr Coating :Not less than Service Condition Number 2 of Table 3 of I

Refer document

Refer document

Refer document