Annual Repair And Maintenance Of Bop Buildings 109 Bn Bsf Under Shq Bsf Gandhinagar Annual Repair And Maintenance Of Bop Buildings 109 Bn Bsf Under Shq Bsf Gandhinagar (Rkb, 19 R, Sunil, Mangoor, Maru, Rann, Wav, Limboni, Ambaji, Dharnidhar, Bashir)
Tender Value
6.99 Lakhs
Estimated cost
Bid Submission
12 Oct 2021
0 days left
EMD
13985
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
SHQ BSF Gandhinagar → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Repair And Maintenance Of Bop Buildings 109 Bn Bsf Under Shq Bsf Gandhinagar Annual Repair And Maintenance Of Bop Buildings 109 Bn Bsf Under Shq Bsf Gandhinagar (Rkb, 19 R, Sunil, Mangoor, Maru, Rann, Wav, Limboni, Ambaji, Dharnidhar, Bashir)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 30 mm thick |
| 2 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 3 | Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. |
| 4 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250X16 mm |
| 5 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 6 | Providing and fixing fly proof stainless steel grade 304 wire gauge, towindows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62X19 mm |
| 7 | 20 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 8 | Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade : One or more coats on old work |
| 9 | Distempering with 1st quality acrylic distemper (ready made) havingVOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer’s specification. One or more coats on old work |
| 10 | Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
AI Tender Summary
Tender Timeline
Oct 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 14, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender