Construction Of Road And Drain In Prabhag No 03 For M C Pathri Tal Pathri Dist Parbhani. Under Fund Vishesh Vaishishtyapoorn Yojana C C Road And Drain
Tender Value
59.49 Lakhs
Estimated cost
Bid Submission
16 Oct 2021
0 days left
EMD
59495
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathri → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Road And Drain In Prabhag No 03 For M C Pathri Tal Pathri Dist Parbhani. Under Fund Vishesh Vaishishtyapoorn Yojana C C Road And Drain
BOQ
| Sl. No. | Item Description |
| 1 | Item no.:-01 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means. (with prior permission of S.E.) Item no.2.10 |
| 2 | Item no.:-02 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. Item no.2.09 |
| 3 | Item No :03Supplying hard murum/ kankar at the road site, including conveying and stacking complete. Item No. 2.29a |
| 4 | Item No : 04Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)80 mm Metal, By breaking Boulders (Hand broken). Item no. 50.56 |
| 5 | Item No : 05 Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking Boulders (Hand broken). Item No. 50.57 |
| 6 | Item No : 06Spreading80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . Item No. 50.58 |
| 7 | Item No :07 Compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. Item no. 50.59 |
| 8 | Item No :08 Supplying soft murum at the road site, including conveying and stacking complete. Item no. 2.29b |
| 9 | Item No :09 Spreading hard / soft murum for side width etc. complete. Item No. 2.30 Page No. 15 |
| 10 | Item No :10Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete.Item No. 2.31 Page No. 15 |
| 11 | Item No : 11 Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge Item No. 6.36 |
| 12 | Add Royalty metal murum |
| 13 | Sieve Analysis |
| 14 | Crushing Value, Compressive strength, water absorption, Specific Gravity |
| 15 | All Test |
| 16 | Item No : 1 - Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.Item No. 2.18 |
| 17 | Item No : 2 - Providing rubble filling of trap/ granite/ quartzite gneiss stones for foundations including hand packing filling gravel / sand in the voids etc. complete. Item No. 11.01 |
| 18 | Item No : 3 - Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) Item No.11.02 |
| 19 | Item No : 4 - Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand . Item No. 25.11 |
| 20 | Item No : 5 - Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Item No. 26.33 |
| 21 | Item No :6- Conveying excavated material upto a lead of 2 km away from site including, conveying,stacking,spreading as directed by Engineer in charge.As per SSR17-18Statement C1 |
| 22 | Add Royalty sand |
| 23 | Add Royalty metal |
| 24 | C.C Cube Test (M-10, M-20) |
| 25 | All test |
| 26 | Labour Insurance |
AI Tender Summary
Tender Timeline
Oct 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 18, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender