Construction Of Ornamental Shelter Shed At Anjol Sharda Mata Temple Construction Of Ornamental Shelter Shed At Anjol Sharda Mata Temple
Tender Value
4 Lakhs
Estimated cost
Bid Submission
07 Oct 2021
0 days left
EMD
12000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kishtwar → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Ornamental Shelter Shed At Anjol Sharda Mata Temple Construction Of Ornamental Shelter Shed At Anjol Sharda Mata Temple
BOQ
| Sl. No. | Item Description |
| 1 | dismentling old plaster or skirting, raking out points and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtrs including all lead and lift. |
| 2 | 12 mm thick cement plaster of mix 1:6 (1: cement :6 coarse sand) includin all lead and lift. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work up to plinth level 1:4:8 (1: cement :4 coarse sand :8 graded stoneaggregate 40 mm nominal size)crushed including all lead and lift. |
| 4 | cement concrete flooring 1:2:4 (1: one cement :2 coarse sand :4 graded stone aggregate ninished with a flooring coat of neat cement including centring shuttering but excluding the cost of nosing of steps etc compelete job (50 mm thick with 20 mm nominal size)including all lead and lift. |
| 5 | Providing wood work in farms of doors windows clerstory windows and other farms, wrought framed and fixed in position with hold fast lugs or with dash fasterers of required dia and length (hold fast lugs or with dash fasters shall be paid for seperatey) |
| 6 | Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows including ISI marked MS pressed butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for seperately. All compelte as per directions of engineer incharge |
| 7 | Demolishing cement concrete manually by mechinical means including dispoal of material within 50 meter lead and lift. 1:3:6 or richer mix . |
| 8 | Providing and laying in positon cement concrete of specified grade excluding the cost of centring and shuttering. All work up to plinth level 1:2:4(1: cement :2 coarse sand :4graded stone aggragate 20 mm nominal size)crushed including all lead and lift. |
| 9 | Centring and shuttering including strutting propping etc. proping etc and removal of form work for foundation, footings and bases of columns. |
| 10 | Providing and fixing water closet squatting pan (Indian style w.C pan ) with 100 mm sand coast iron P or S stop 10 liter low level PVC flushing cistern including flesh pipe (of approved make) manually controlled device (handle lever) conformingtoIS 7231 with all fittings and fixtures complete including cutting and making good the walls and floors whever required. |
| 11 | Providing /fixing 100 mm dia PVC pipe of 4 kg pressure of approved brand and manufacturer complete job |
| 12 | Demolishing stone rubble masonary manually by mechanical means including stacking of servicable material with 50 meter lead in cement mortor |
| 13 | Ramdon rubble masonary with hard stone from quarry in foundation and plinth including levelling up with cement concrete 1:6:12 (1: cement :6 coarse sand :12 graded stone aggregate 20 mm nominal size ) up to plenth level with cement mortor 1:6 (1: cement :6 coarse sand ) |
| 14 | Providing and fixing 1st quality ceremic glazed tiles conforming to IS 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA OR Equivalent make in all colours shades except begunday, bottle green, black of any size as approved by engineer-in-charge in skirting risesof steps anddados over 12 mm thick bed of cement motors 1:3 (1: cement :3 coarse sand ) and jointing with grey cement shutters @3.3 kg /meter square including pointing in white cement mixed with pigment of matching shade complete job. |
| 15 | White washing with line to give an even shade (three or more coat) |
| 16 | Dismentling with 1st quality acrylic washable distemper (ready made) of approvedmanufacture and of required shade /colour complete as per manufactures specifications as two or more coats on new work |
| 17 | Applying priming coat with ready mixed pinki or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 18 | Painting with synthetic enemal paint of approved brand and manufaucture to given an even shade tow or more coats |
| 19 | Earth work in excavation by manual means over (exceeding 30 cm and up to 1.50 meter in depth 1.5 meter in width as well as 10 sqm on plan) including disposal of excavated earth up to 1 meter from cutting edge, dispaosed earth to be levelled and neatly dressed in all kind of soil. |
| 20 | Providing and placing onterrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked including the B/S licence etc. with cover and suitable working arrangemnts and making necessary holes for inlet outlet and over flow pipes but with flitrings and base support for tank (Sintex, electroplastic, star, Lotus, or equivalent hanving value ISI lience. |
| 21 | Providing and fixing G.I. pipes compelte with G.I. fittings and clamps including cutting and making good the walls etc 15mm dia nominal bore (medium) for incompelt toilet block |
| 22 | Providing and fixing G.I. union in G.I. pipe including cutting, and threading the pipe and making log screw etc complete (new work) |
| 23 | Providing and fixing G.I. sockets including cuting and threading of pipe complete 15 mm more |
| 24 | Providing and fixng G.I.Tees including cutting and threading of pipe complete 15 mm nominal bore. |
| 25 | Providing and fixing PTM bib cock of approved quality and colour15 mm nominal bore |
| 26 | Supply and fixing of ball valve (bross) of approved quality |
| 27 | Providing and fixing 100 mm sand cost iron grating forgrillfloor nahani trap circular type100mm nominal dia |
| 28 | Providing and fixing PVC cowel fev W.C vent gas pipe |
| 29 | Providing and fixing PVC bend 100 mm dia |
| 30 | Providng and fixing towel rail of stair steel |
| 31 | Supply and fixing of soap holder of stainless steel of approved brand old wash rooms |
| 32 | Supply and fixing of Aluminum tower bolts 20 mm with 8 mm bore |
| 33 | Supply and fixing of sliding bolt |
| 34 | Supply and fixing of door handles aluminum 125 mm |
AI Tender Summary
Tender Timeline
Oct 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 08, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender