|
| 1 | Clearing shrub jungles uprooting stumps and small bushes and trees below 1 m girth on pre-measurement including all cost of labour, T&P, cess etc complete as per direction of the Engineer in charge. |
| 2 | Removing and Clearing of deposited earth and silt with all leads and lifts to proper slope and profile as per the requirement including rough dressing and breaking clods to a maximum 5 to 7 cm and laying in layers not exceeding 0.23 m in depth in proper slope and profile along with supply of all labour and tools & plants, all materials including all taxes & supervision charges to complete the item of work as per design, drawing and specification and as per the direction of the Engineer-in-charge. (Measurement will be taken in the finished approved level section) |
| 3 | Dismantling brick or stone masonry in lime or cement mortar under3 m height including stacking the useful materials for reuse and removing the debris within 5 m lead per 1 Cum complete as directed by the Engineer-in-charge. |
| 4 | Excavation of foundation to proper profilein hard & gravellysoil including moorum, stoney earth, gravel etc. except all kinds of rock & boulders exceeding 0.014 cum in volumewith all leads, lifts and delifts, includingdressing and leveling the bed to proper slope and level making it fit for laying concrete and depositing the excavated materials clear of work site with all leads and lifts etc. including dewatering from foundation if necessary etc. with supply of all labour and T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge. (Measurement will be taken on finished approved level section). |
| 5 | Earth work in excavation by mechanical means in all kinds of soil not required blasting of all kinds including soft laterite, sand stone, hard conglomerate or any other soft rock which may be quarried of split with crow bars including dressing and leveling of bed and disposal of excavated material clear of work site by mechanical means and unloading the same on specified approved area with all leads, lifts and delifts including cost of dewatering, cost component of construction and maintenance of coffer dam, diversion arrangement for excess flow and dismantling of the same after completion of work including cost of mobilisation, de-mobilisation, tools & Plants, all material, all taxes, cess labour and supervision charges, supplying all machineries and equipments with operation and maintenance charges with all incidental charges to complete the item of work as per design, drawing & specification and as per the direction of the Engineer -in-charge. (Measurement will be taken on finished approved level section). |
| 6 | Filling of foundation with sand with all leads and lifts, delfts including watering and ramming in layersincluding cost conveyance royalty and other taxes of all materials with supply of all labour and T&P required for the work etc. complete in all respect etc. completed as directed by the Engineer in charge. |
| 7 | Filling foundation and plinth with excavated earth including watering and ramming etc. complete including cost conveyance royalty and other taxes of all materials with supply of all labour and T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge. |
| 8 | Providing rigid, smooth centering & shuttering for RCC works including false work and including cost, conveyance, royalty & other taxes of all materials required for the work complete in all respect and dismantling the same after casting and curing with water for specified period including depositing the debris clear of work site with all leads & lifts, delfts including supply of all labour and T & P required for the items etc. complete in all respect as directed by Engineer-in-charge. (for foundation & plinth) |
| 9 | Providing rigid, smooth centering & shuttering for RCC works including false work and including cost, conveyance, royalty & other taxes of all materials required for the work complete in all respect and dismantling the same after casting and curing with water for specified period including depositing the debris clear of work site with all leads & lifts, delifts including supply of all labour and T & P required for the items etc. complete in all respect as directed by Engineer-in-charge. (Walls and Fins) |
| 10 | Providing Cement Concrete M15 grade with nominal reinforcement (excluding cost of M.S. rod, carriage and labour for cutting, bending, binding and fixing of M.S. rod) using 20mm and down, graded, crusher broken hard granite stone aggregates of approved quality quarried, free from weathered skin, quarry debris and foreign materials, using clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves wherever necessary including cost, conveyance, royalty and other taxes of all materials, with all cost of tools and plant, cost and carriage of water etc, with supply of all labour and supervision Charges including mobilisation & de-mobilisation of men & machineries, T&P with all incidental Charges required for the work complete in all respect as directed by the Engineer-in-Charge. |
| 11 | Providing Cement Concrete M20 grade for RCC works on approved surface or shape and size using 20mm and downgraded crusher broken hard granite stone aggregates of approved quality quarried, free from weathered skin, quarry debris and foreign materials, clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves including cost, conveyance, royalty and other taxes of all materials, (excluding cost, carriage of M.S. rod and labour for cutting, bending, binding and fixing of M.S. rod, GST) with all cost of tools and plant, cost and carriage of water etc, with supply of all labour and supervision Charges including mobilisation & de-mobilisation of machineries, T&P with all incidental Charges required for the work complete in all respect as directed by the Engineer-in-Charge. |
| 12 | Straightening, cutting, bending, binding of steel reinforcement and tying the grills as per approved design & drawing and placing in position including cost, conveyance, royalty and other taxes of M.S. Rods, binding wires of 18 to 20 gauge with supply of all labour and T&P required for the work etc, complete in all respect as directed by the Engineer-in-Charge. (Weight of the binding wire will not be included in the measurement for payment) |
| 13 | Providing 20 mm thick cement plaster in cement mortar (1:4) over stone work after racking out the joints 12 mm deep including watering, curing, finishing, rounding the corner wherever necessary and including cost, conveyance & royality and all taxes of materials, supply of all Labour and T&P to complete in all respect as directedbythe Engineer-in-Charge. |
| 14 | Rough stone dry packing with departmental stone in aprons & revetments to all heights & thickness profile using hard granite broken stones of 30cm& above size of approved quality free from weathered skin including filling the interstices with small stones bond stones by wedging & hammering to proper slope and level with cost conveyance, royalty & other taxes excluding GST of all materials including labour cess, all labour, T & P materials required for this items etc. complete in all respect as directed by the Engineer-in-charge. |
| 15 | Supplying and laying RCC Hume pipes (NP3) with collar, jointing with Cement mortar, twisted and coal tarred hemp yarn including caulking and filling with cement mortar (1:3) including cost, conveyance, royalties and all taxes of RCC Hume Pipe and including supply of all labour and T&P etc. to complete the work or as directed by the Engineer-in- charge. (600 mm dia RCC Pipe) |
