|
| 1 | Dismantling of undersize/defected cross arms of M.S. channel or angle of any sections complete all as specified and as directed. |
| 2 | Materials and labour for cross arm bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and including apllying two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and as directed. |
| 3 | Dismantling of unserviceable insulator of any size/type, complete all as specified and as directed. |
| 4 | Supply and fixing of Pin type insulator, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 11000 volts grade confirming to IS-731-1971 complete all as specified and directed. |
| 5 | Supply and fixing of disc type insulator, porcelain, vitreous 145mm high and 255mm dia ball and socket type, white, brown or green, Single disc assembly for tension with tension clamps for conductors, working pressure 11000 volts grade confirming to IS-731-1971 complete all as specified and directed. |
| 6 | Supply and fixing Loop type insulator, vitreous porcelain, white, brown or green, small size, with overall dimensions 65 x 90mm, clearance of hole 16mm complete all as specified and as directed. |
| 7 | Material and labour for galvanised stay strand of size 7/3.15mm including taking down old unserviciable stay strand complete all as specified and as directed. |
| 8 | Supplying, Laying connecting & testing XLPE insulated, PVC sheathed, armoured HT electric power UG cable (heavy duty with stranded aluminum conductor)of size 95 Sqmm, 3 core, 11000 Volts(Earthed) grade, confirming to IS-7098 (Part-II) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs including taking down existing old unserviciable cable complete all as specified and as directed.Note : Earth work, brick protection and sand cushioning and GI Pipe Shall be measured and paid separately under respective item. |
| 9 | Dismantling of old unservicable/damaged stay assembly embedded in concrete including demolition of PCC upto ground level and removing unserviceable materials from site of work complete all as specified and as directed. |
| 10 | Material and labour for Stay assembly 20mm dia complete with all accessories as shown in electrical plate No. 1 of SSR Part-I (loop type insulator, stay clamps, excavation and concrete shall be measured and paid separately under respective items) complete all as specified and as directed. |
| 11 | Supply and fixing HT 11 KV (Earthed) grade heat shrinkable end termination jointing kit outdoor type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and as directed. |
| 12 | Dismantling old unservicable steel tubular poles/struts, any size including breaking up PCC foundation and removal of rubbish complete all as specified and as directed. |
| 13 | Supply and fixing steel tubular swaged pole, type 410 SP 55 (Overall length 11.00 meter) conforming to IS-2713 (Part 1 to 3) 1980 complete with cast iron base plate, finial taper plug, bolts, nuts and washers, screws. Pole shall be painted with two coat of black bituminous throughout internally and externally upto planting depth and the remaining external portion shall be painted with two coats of aluminum paints over a coat of red oxide zinc chrome primer, painting red & yellow alternate strips of 30cm each externally from ground level upto 1.5m with synthetic enamel paint, and writing pole No with black paint on yellow backgroundcomplete all as specified and as directed.(Note: Excavation and earth work and PCC shall be measured and paid separately under respective items) |
| 14 | Materials and labour for preparation of old painted 11mtr long steel tubular electric pole exposed surface and painted with one coat of aluminium paint including painting from bottom to 1.5m height alternative with 30cm red and yellow strip and writing pole no with black paint on yellow backgroundcompleted all as specified and as directed. |
| 15 | Dismantling of existing unserviceable/undersize ACSR conductor (of any size) , jumper from overhead line, removing unserviceable materials from site of work complete all as specified and as directed. |
| 16 | Materials and labour for Aluminum conductor steel reinforced (ACSR) conductor as in overhead HT electric line and stretching the same with required span, standard sag and binding the conductor with pin/shackle insulator and jumpers with aluminum binding wire not less than 2.00mm dia, PG clamp etc complete all as specified and as directed. |
| 17 | Supply and laying of GI tubing 80mm bore light grade with fittings laid in trenches or for road crossing for protection of underground cables including taking down unserviciable existing GI pipe complete all as specified and as directed. |
| 18 | Material and labour for 4mm dia galvanised iron wire as earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required and including taking down old unserviciable earthing strip omplete all as specified and directed. |
| 19 | Excavation in trenches not exceeding 1.50 m wide and n.exc1.5 m in depth for foundation of poles, cable etc, or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed. |
| 20 | Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cmcomplete all as specified and as directed. |
| 21 | Removing excavated material to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point completeall as specified and as directed. |
| 22 | Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of under ground cableincluding spreading and punning down complete all as specified and as directed.Note:- Punned down thickness shall be measured. |
| 23 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 24 | Material and labourfor PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in coping and like including necessary formwork complete all as specified and as directed. |
| 25 | Materials and labour for brick protection cover to underground cables with sub class ‘B’ brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed. |
