Military Engineer Services-MES has published Repair And Replacement Of Defective Spare Of Effluent Treatment Plants, Fume Suction Plant, Hot Water Generator, Car Washing Plant, Degreasing Plant And Hull Painting Plant Located In Delhi Cantt Under Ge ( U ) P And M Delhi Cantt. Repair And Repl. Submission Date for this Tender is 28-10-2021. Effluent Treatment Plant Tenders in DELHI CANTT Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Oct-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-10-2021 |
| Sl. No. | Item Description |
| 1 | Draining and cleaning of alkaline chamical tank ,Hot water tank, Cold water tank in installed basement of de-greasing palnt and 05 Nos ofETP tank complete andremovingfrozen solid sludge from alltank in each month. Solid sluge and other wastage should be disposed / thrown at a minimum distance of 100 metre away from the plant or a location decided by users with in the 505 ABW premises complete all as specified and directed by Engr-In-charge. detailsof Tank -(a)05 ETP tank ( Clean in each Month) Total -5 x 6 (month )= 30 month (b)03 Tank (Alkaline Tank-01, Hotwater Tank-01, ColdWater-01) Total = 3 x 3 (clean the tankonce in 02 month) = 9 Month G total- 30+9=39 Month |
| 2 | M&L for cleaning and repairingof all spray pipe lines of various size, laying on the floor inside the de-greasing washing chamber plantforalkaline chemicalandHot/coldwater pumping through this pipe and connceted nozzels complete, dismatling / open the oulet valve of pipeor nozzle including coupling with packing near joining the pipecomplete drain out any remainingfrozen materials inside the pipe line and nozzels, making good any leakage in pipe line withnecessary gas cutting, welding , polishing, testing as per site requirement complete all as specified and directed by Engr-In- charge. |
| 3 | M&L for overhauling of squirrel cage induction electric motor 3 phase 415 volts , 1455 RPMof capacity60 HP/45KW with pump setcomplete cleaning the impeller and dischage /suction casing of the pump including repairs to pumpcomplete with dismantling andre-assembly and testing complete all as specified and directed by Engr-In-charge. NOTE:Rewinding of motor by super enamelled copper wire with class F insulation necessary disconnecting electric connections/ taking down and shifting to local workshop and brought back to site complete reassembled as per existing location . Lubrications oils and apply greasing to all moving parts. Repair/replacement, retrofit ,of all major/ minor parts i.e rotor,stator,winding,terminal box ,bearing, shaft , Fan, impeller , gland assembly, bearning assembly , coupling,Contact Terminals and checking and replacing the burnt cable glandsand cunsumableitems complereas requirementfor smoothfunctioning ofmotor & pump set ,all materilas are deemed to beinclude in the quoted rate by the contractorall as specified and directed by Engr-in-Charge. |
| 4 | All as per srl item No 03 here-in-before but motor of capacity 12.5 HP complete all as specified and directed by Engr-In-charge. |
| 5 | All as per srl item No 03 here-in-before but motor of capacity 7.5 HPcomplete all as specified and directed by Engr-In-charge. |
| 6 | All as per srl item No 03 here-in-before but motor of capacity 5.0 HP complete all as specified and directed by Engr-In-charge. |
| 7 | All as per srl item No 03 here-in-before but motor of capacity 3.0 HP complete all as specified and directed Enginer-in-charge. |
| 8 | All as per srl item No 03 here-in-before but motor of capacity 0.5 HP complete all as specified and directed by Engr-In-charge. |
| 9 | M&L for overhauling offume exahuastblower withelectric motor 3 phase 415 volts , of capacity5HP mounted on roof of degreasing washing plantcomplete dismantling from duct andafter make a good connecting the blowerwith suction/deliveryductcomplete reassembling and reinstalling ,testing the same to its orginal position complete all as specified and directed by Engr-In-charge. NOTE:Rewinding, dismantling and reassembly, Lubrication, gressing toall moving parts and repair/replacement of all major/ minor partsare deemed to beincluded in the rates quoted by the contractor. |
| 10 | Taking down complete and supply & fixing in replacement of centrifugal air blower with motorof capacity5 HP, 3P,415 Volt including complete fitting with existing suction / deliveryduct necessary retrofit as per site requirement complete all as specified and directed by Engr-In-charge.(Make- Kirloskar/ Crompton /GEC) |
| 11 | Supply& Fixing in replacement pneumatictimerelay 0-60 sec complete all as specified & directed by Engr-in-Charge. (Make : KRTPN10-1 of BCH or equivalent in L&T) |
| 12 | Supply& Fixing in replacement foot valve heavy duty of size 50mm complete all as specified and directed by Engr-in-Charge :(Make : Zoloto/Kirloskar/ Leader/ AUDCO) |
| 13 | Supply& Fixing in replacement foot valve heavy duty of size 40 mm complete all as specified and directed by Engr-in-Charge :(Make : Zoloto/Kirloskar/ Leader/ AUDCO) |
| 14 | Supply& Fixing in replacement AC induction tubular heater 9 KW, 415 volts, 3 phase of length 1.5 mlength or as per sample with MS powder coated terminal cover as per sample complete all as specified and directed by Engr-in-Charge.(Make - Telelec/Escort/USGC/Theeta). |
| 15 | Supply and fixing industrial heating element capacity of 9 KW ,3P,415 volt, L shape , 2.6 Mtr length or as per samplewith MS powder coated terminal cover as per samplecomplete all as specified and directed by Engr-in-Charge.(Make Escort/Theeta/Spotheat) |
| 16 | Supply& Fixing in replacement 3 pole power contactor 32 Amps type ML2with 2NO+2NC complete all as specified and directed by Engr-in-Charge. (Make :L&T /Siemens/Legrand/ABB) |
| 17 | Supply& Fixing in replacement contactor MNX 18 415V AC3 complete all as specified & directed by Engr-in-Charge. Make : L&T/Siemens / Legrand/ABB) |
| 18 | Supply& Fixing in replacement contactor MNX 25 415V AC3 complete all as specified & directed by Engr-in-Charge. Make : L&T/Siemens / Legrand/ABB) |
| 19 | Supply& Fixing in replacement 3 pole power contactors type MNX 70with 2NO+2NC complete all as specified and directed by Engr-in-Charge. (Make :L&TSiemens/Legrand/ABB/BCH ) |
| 20 | Supply& Fixing in replacement 3 pole power contactor 140 Amps type MNX 140with 2NO+2NC complete all as specified and directed by Engr-in-Charge. (Make :L&TSiemens/Legrand/ABB/BCH ) |
| 21 | Supply and fixing in replacementdigital temperature indicator 6100 as per samplecomplete fitting and necessary wiring as per existing panel complete all as specified and directed by Engr-In-charge.(Make. Audiotronics or equivalent ) |
| 22 | Supply and fixing in replacement of thermostat 72" long including elecrical connection completefor suitable to hot water tank as per sample complete all as specified and directed |
| 23 | Supply and fixing in replacement of stainless steel water Spray Nozzels 16LPM; 1/2 BSPwithnecessary gas cutting, welding , polishing, testing as per site requirement completeall as specified and directed by Engr-in-Charge. (Make : as per sample) |
| 24 | Supply , installation, commissioning, testingin replacement of centrifugal monoblock Pump set of capacity 7.5 HP,3000 RPM, 3 Phase 415 Volt with IP-44 protection including mounting ,foundation and making good complete all as specified and directed by Engr-in-Charge. (Make : Model No KDS852 of Kirloskar or equivalent in Crompton /Beacon/ KSS) |
| 25 | Supply , installation, commissioning, testingin replacement of centrifugal monoblock Pump set of capacity 3.0 HP,3000 RPM, 3 Phase 415 Volt with IP-44 protection including mounting ,foundation and making good complete all as specified and directed by Engr-in-Charge. (Make : Model No KDS325 of Kirloskar or equivalent in Crompton / Beacon/ KSS) |
| 26 | Supply and fixing in replacement of Exhaust fan heavy duty of size 600mm sweep of 900RPM, 3 Phase, 415 Volt, 50 Hz AC with metal body including all accessories, connections, testing, assembling and making good to disturbed surfaces of wall including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge.(Make: Model Turbo Force SP of Havells or equivalent in Bajaj/Philips/ Crompton Greaves) |
| 27 | Supply and fixing in replacement of Drain Pump(ss304) with Motor 1 HP, complete all as specified and directed by Engineer-in-Charge.( Make: KSB/Kirloskar/Grundfos ) |
| 28 | M&L for replacement of electro Hydraulic thrustor brake18kg type MDT150-18 complete all as specified and directed by Engr-in-Charge.(Make- USGC or equivalent to Speedage/ Speed-O-Controls) |
| 29 | M&L for replacement of elctro Hydraulic thrustor 18kg 3 phase 415V ACtype ST-520 complete all as specified and directed by Engr-in-Charge. (MakeUSGC or equivalent to Speedage/Speed-O-Controls ) |
| 30 | Supply & Fixing in replacementMCB 3 pole, 415V AC, 25 Amp rating 16 KA rupturing capacity thermal magnetic release along with any retrofit work complete all as specified & directed by Engr-in-charge(Make : L&T /Siemens/Legrand/ABB) |
| 31 | Supply & Fixing in replacementMCB 3 pole, 415V AC, 32 Amp rating 16 KA rupturing capacity, thermal magnetic release alongwith any retrofit work ,thimbles, gland as per requirement inexisting panel complete all as specified and directed by Engr-In-charge. (Make : L&T /Siemens/Legrand/ABB) |
| 32 | Supply & Fixing in replacementMCB 4 pole, 415V AC, 32 Amp rating 16 KA rupturing capacity,thermal magnetic release along with any retrofit work thimbles, gland as per requirement inexisting panel complete all as specified and directed by Engr-In-charge.(Make : Legrand/Schneider/L&T/ABB) |
| 33 | Supply & fixingin replacement3 core2.5 Sqmm PVC insulated & round sheathedbright annealed copper conductor flexible cable for voltage grade 1100 V as per IS: 694 complete all as specified & directed by Engr-in-charge(Make : Finolex/ Polycab/Kalinga/ Havells) |
| 34 | Supply & fixingin replacement3 core6 Sqmm PVC insulated & round sheathedbright annealed copper conductor flexible cable for voltage grade 1100 V as per IS: 694 complete all as specified & directed by Engr-in-charge(Make : Finolex/ Polycab/Kalinga/ Havells) |
| 35 | M&Lfor Servicingof Hull pullinggear box of ratio 70:1 type 400 with taking out gears , rope drum with rope & replacement of gear shaft , locks , gasket set,nuts & boltstop up gear oil of standard grade , greasing, replacing defective control panel and accessories and also Rates to include replacement of minor spares (control copper wiring, aluminium lugs, nut bolts and cosumable items)complete all as specified and directed by Engr-In-charge. Note:- The rates for fixing of items as mentioned in BoQ Srl item Nos 36 to 38 here-in-after is deemed to be included in the quoted rates. |
| 36 | Supply onlyof gear bearing with coupling suitableforwinch pulling gear box as per sample of existing size complete all as specified and directed by Engr-In-charge.(Make:- SKF/TATA/NBC ) |
| 37 | supply onlysteel wire rope size of 16 mm FMC construction 6 x 36 ungalvanised as per IS 2266/02 complete all as specified and directed by Engr-In-charge.(Make:- Usha Martin/fort william) |
| 38 | Supply only rotary typelimit switchRG/LS/4C , suitable for gear ratio 70:1 with 2 NO + 2 NC complete all as specified and directed by Engr-In-charge. (Make USGC/Speedage/ Speed-o-control ) |
| 39 | Supply and fixing in replacement of Switchdisconnector fuse TPN with HRC fuse and handle open execution type of size 250 Amp complete all as specified and directed by Engr-In-charge.(Make- L&T/BCH/GE/Siemens) |
| 40 | Supply and fixing in replacement of Switchdisconnector fuse TPN with HRC fuse and handle open execution type of size 160 Amp complete all as specified and directed by Engr-In-charge.(Make- L&T/BCH/GE/Siemens) |
| 41 | Supply and fixing in replacement of Switchdisconnector fuse TPN with HRC fuse and handle open execution type of size 100 Amp complete all as specified and directed by Engr-In-charge. (Make- L&T/BCH/GE/Siemens) |
| 42 | Supply and fixing in replacement in over load relay rating 30-50A suitable for MNX contactormounting , including necessary wiring as per site requirementcomplete all as specified and directed by Engr-in-Charge.(Make :- Schneider/L&T/Siemens/ Legrand/ABB) |
| 43 | Supply and fixing in replacement thermalover load relay rating 14-23 A suitable for MNX contactormountingincluding necessary wiring as per site requirementcomplete all as specified and directed by Engr-in-Charge. (Make :- L&T/Siemens/speedage/GE/BCH) |
| 44 | Supply and fixing in replacement t thermalover load relay rating 9-15 A suitable for MNX contactormounting including necessary wiring as per site requirementcomplete all as specified and directed by Engr-in-Charge. (Make :- L&T/Siemens/speedage/GE/BCH) |
| 45 | Supply and fixingin replacement over load relay of 5.5-8 Amp type LRE-12 complete all as specified and directed by Engr-in-Charge. (Make :- L&T/Siemens/speedage/GE/BCH) |
| 46 | M&L for replacement of Floating shaft made out of M.S. EN8 material medium carbon steel of Cylindrical shape of size100mm diaand 1.80mtr length and shaft end both side machining with keyway slot as per sample weight approx. 110.98kg complete all as specified and directed by Engr-In-charge. (Make –Speedage/USGC/ Speed-O-Controls) |
| 47 | Supply and fixing in replacement of Bib cock 15mm in filter press madeout of Gun metal/Brass with necessary connections as per sample complete all specified and directed by Engr-in-Charge.(Make- Sant/Zoloto/Rotex) |
| 48 | M &L foroverhauling of helical rotor pump /chemical pump series RN with replacement of oil seal and ball bearingminor / major parts complete all as specified & directed by Engr-in-charge. (Make : Roto) |
| 49 | M&L for Servicing of Pneumatic Solenoiddrain Valves of size 100/150 NB i.e Cleaning checking for wear and tear, checking electrical termination, testing and breakdown maintenance and replacement of unserviceable parts if any required for smooth functioning of the valve complete all as specified and directed by Engr-In-charge.Note:- (i) The scope of work includes all repair / replacement of unserviceablepartsincluded in the quoted rate by the contractor all as specified and directed. (Make :- Rotex/trident/Aira) |
| 50 | Supply and fixing in replacement of Pneumatic Solenoid valve 50NB with Air Pipe & Pipe connected accessories complete all as specified and directed by Engr-in-Charge. (Make-Rotex/Trident/Aira (Model ECF50)) |
| 51 | Taking down and supply & fixing in replacement of CIbutterfly ball valve 50 MM dia withhand operated fiiting in existing location complete all as specified and directed by Engr-In-charge. |
| 52 | Supply and fixing in replacement of defective push button in Green/Red colour for suitableON/OFFtomotor complete connection in existing panel complete all as specified and directed by Engr-In-charge. |
| 53 | Taking down and Supply &fixing in replacement of defective rotary selector switch for Amp meter /volt meter includingwiring as per requirement in existing panel complete all as specified and directed by Engr-In-charge. |
| 54 | Taking down and supply & fixing in replacement of defectivephase indication lamp RYB with wiring complete as per requirement of existing panel complete all as specified and directed by Engr-In-charge. |
| 55 | Dismantling / taking down defective & rusted pH controller withaccessories and supply & fix pH controller with new SS enclosure outdoor type and wiring with copper cable not less than 1.5 sqmm ,complete all as specified & directed by Engr-in-charge (Make: Nutronix/Omega/SB enternational) |
| 56 | M&L for Sevicing of centrifugal floor mountedID (Induced Draft) Fan of capacity 36000 CFM , V belt driven for ventilation system make of IEPL including their connected accessories completefor smooth functiononing with re-assembly and testing complete all as specified and directed by Engr-In-charge. NOTE: (a) Servicingto by done by auth service team. (b) Cleaning and inspect all component part of ID fan i.e vibration checking, fan housing, fan balancing & vabration analysis, Nut & Bolt proper tighting,suction pressure,abnormal noise, V belt correctly aligned and properly streched, clean disassembled partcomplete. (c) Lubrication and greasing all movable parts i,e bearing shaft, (d) Repair/replacementofV belt, rollerbearing block, shaft ,V belt , in/out duct ,MS 20mm round bar studs of length 60cm 4 Nos to hold the blades firmly with welding, brazing parts required for smooth functioning of ID fan completeto included in the quoted rate by the contractor all as specified and directed by Engr-in-Charge |
| 57 | M&L for Servicingof centrifugal floor mountedFD (Forced Draft) Fan of capacity 40000 CFM , V belt driven for ventilation system make of IEPL including their connected accessories completefor smooth functiononing with re-assembly and testing complete all as specified and directed by Engr-in-Charge. NOTE: (a) Maintnance to be done by auth service team . (b) Cleaning and inspect all component part of ID fan i.e vibration checking, fan housing, fan balancing & vibration analysis, Nut & Bolt proper tighting,suction pressure,abnormal noise, V belt correctly aligned and properly streched, clean disassembled partcomplete. (c) Lubrication and greasing all movable parts i,e bearing shaft, (d) Repair/replacement,retrofit of Fan blade , fan V belt, rollerbearing block ,Shaft, V belt , in/out duct ,MS 20mm round bar studs of length 60cm 4 Nos to hold the blades firmly with welding, brazing parts required for smooth functioning of ID fan complete. The rates quoted by the contractor shall include all the above points. |
| 58 | M&L for overhauling of squirrel cage induction electric motor 3 phase 415 volts , 1475 RPMof capacity30 HP/22KW make of CG complete with re-assembly and testing complete all as specified and directed by Engr-In-charge. NOTE:Rewinding by super enamelled copper wire with class F insulation necessary disconnecting electric connections/ taking down and shifting to local workshop and brought back to site, dismantling and assembly, Lubrications oils and apply greesing to all moving parts and repair/replacementof all major/ minor parts i.e rotor,stator,winding,terminal box ,bearing, shaft , Fanitems as required to make motor smoothfunctional shall deemed tobe included in the rates quoted by the contrator. |
| 59 | Supply and fixing in replacement of paint spray guns HPLV Type - 59 or as per sample suitable for mannual paintingand flexible PVC pipe heavy duty ISI mark not less than 15mm bore ,6 Mtrlong complete all as specified and directed by Engr-In-charge. (Make : Bullows /Giraco/Ransburg/AP&T or equivalent to ISI mark) |
| 60 | Material & Labour for replacement floor paint filtersize 630 x 650 x 50mmMat Type – Class ‘A’ Glass Fiber Grade : G3 (EN779) Color : Green + White Thickness : 50 mm Weight : >250g/m2 Paint Hold Capacity : 2450 g/sqm Avg. Paint Arrest : 92% Rated Air Flow : 0.65 cum/sec Media Velocity : 2.5 m/sec InitialTemp Resistant : Up to 177 Degree ‘C’ Flame Resistant : Non Flammable complete with removal of old filter from floor after carefully taking out MS grating,removal of old filter and cleaning filter frame, replace filter media,refixinggrating complete all as specified & directed by Engr-in-charge. (Make : Automative solution/Environmental Engineering Co/Athlete) |
| 61 | Material & Labour for replacementof ceiling Air Filter Type : Progressively Structured ,PolyesterThermally Bonded Impregnated, Grade : F5 (EN779) Thickness : 22 mm ,Weight : 600g/sqm Dust Hold Capacity : 437g/sqm Avg. Dust Arrest : 94% Rated Air Flow : 900cum/hr Media Velocity : 0.25m/sec ,Temp Resistanto 100 Degreecomplete with removal of old filter from ceiling after carefully taking down ceiling support and refixing after replacement of filters complete all as specified and directed by Engr-in-Charge. (Make : Automative solution/Environmental Engineering Co/Athlete) |
| 62 | Material & Labour for replacementPre Filter of size 600mmx600mmx50mm, 10 micron filtration level , velocity 2.6m/sec, min dust levelling 500g/m2 , constructed with several layer of HDPE mesh stiched together synthetic micro fibre with support of aluminium expended metal layer complete all as specified and directed by Engr-In-charge.(Make. Automative solution/Envirnmental Engineering Co) |
| 63 | Material & Labour for replacementfine filterof size 600mmx600mmx150mm woven synthetic media housed in GI wire mesh capacity of dust filtration up to 99% efficiency, the complete housing shall be fabricated out of 16 gz GI sheet,and double skinned insulation complete all as specified and directed by Engr-In-charge. ( Make : Automative sulution/Envirnmental Engineering Co/Athlete) |
| 64 | M&L for overhauling compressor unit 9 KG/ Sqcmwith repalcement of compressor oil , air oil separator, oil filter primary and secondary, safety valve assembly, non return valve assembly,gasket set, fan belts, nuts & bolts, air pressure valves, complete itmes for smooth functioning of compressorincluded in quoted rate by the contractor complete all as specified and directed by Engr-In-charge.(Make:-ELGI ) |
| 65 | Supply & fixing in replacement of defectiveAC heating elements6 KW, 415 volts, 3 phase of length 610mmcomplete fitting as per existing loaction complete all as specified and directed by Engr-In-charge.(Make Telelec/Escorts/Theeta) |
| 66 | Supply and fixing in replacement ofMCCB 4 pole, 415V AC, 250 Amp rating 36 KA rupturing capacity, thermal magnectic release, complete with any retrofit work, terminal links withthimbles, gland as per requirement inexisting panel complete all as specified and directed by Engr-In-charge.(Make : Legrand/Schneider/L&T/ABB) |
| 67 | Supply and fixing in replacement ofMCCB 3 pole, 415V AC, 100 Amp rating 25 KA rupturing capacity, thermal magnectic release, complete with any retrofit work, terminal links terminal links withthimbles, gland as per requirement inexisting panel complete all as specified and directed by Engr-In-charge. (Make : Legrand/Schneider/L&T/ABB) |
| 68 | Supply and fixing in replacement ofMCCB 3 pole, 415V AC, 125 Amp rating 36 KA rupturing capacity, thermal magnectic release, complete with any retrofit work, terminal links terminal links withthimbles, gland as per requirement inexisting panel complete all as specified and directed by Engr-In-charge. (Make : Legrand/Schneider/L&T/ABB) |
| 69 | Supply and fixing in replacementof 04 x LED panel light of 36 watt Weather and Water proof (600mm x 600 mm Square PL Armstrong quadra series) with cabling to be done through SS Capping Argon Welded with SS walls of the washing chamber suitable to the existing site with all fixing accessories complete all as specified and directed by Engr-in-Charge. (Make: Syska SSK-PL-36WSQ 5.7K or equivalent in Bajaj/ Phillips/ Havells) |
| 70 | M&L for defective Rail track on floor mounted of hull painting trolly make good orjoining ,align the defective Rail track with the help ofmetalfishplates/joint bar piecesincluding necessary holes ,welding and tighteningwith nut, bolt, washer as per requirementat site for smooth fucntioning of trolly on track complete all as specified and directed by Engr-In-charge. Note: Earth work and PCC for necessary requirement of resurfacing around the defective area of track the cost of all materails are deemed to be includecomplete materails rate include in the rate quoted bt the contractor. |
| 71 | Taking down and M&L for Earthling complete with galvanised steel earth plate electrode 60cm x60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, including provision of galvanized earth strip 32x6mm connected by means of bolts nuts, checknuts and washers of galvanized iron or steel, provision of 40mm dia GI pipe medium grade for earth strip protection connected from earth plate electrode to main switch board, provision of 20mmdia GI pipe perforated medium grade for entering arrangement and PCC 1:3:6 type CI chamber, MS funnel, wire mesh, 50mm thick RCC 1:2:4 type B1 for earth pit cover with 6 Nos 8mm dia high strength deformed steel TMT bars on both ways, including necessary excavation in any type pf soil returning filling in, removal of surplus soilto a distance n.exc.50m, provision of charcoal and salt complete all as shown in electrical plate No3 of Schedule Part-I 2009 all as specified and directed and testing on completion complete all as specified and directed by Engr-In-charge. |
| 72 | M&L for taking out motor from 15HP ,1400 RPM blower set andrewinding of electric motor squirrel cage induction 15 HP, 1400 RPM, 415 Volts 3 Phase, 50 Hz with super enamelled copper wire of superior quality as per existing guage including varnishing, insulating materialincluding reassembling fixing with suction & dischage duct in position making connection testing and commissioning & complete all as specified & directed by Engr-in-charge |
| 73 | All as per srl item No 72 here-in-before but blower motor of capacity 10 HP complete all as specified and directed Enginer-in-charge. |
| 74 | Supply and fixing in replacement of defective SS round grade 304 of size 25x 5300mm by grouting in earth by holding clamp including cutting and welding complete all as specified and directed by Engr-In-charge. |
| 75 | Supply and fixing in replacement of defectivehull resting trolly wheel OD 410mmx95mm and wheel collar thickness 15mm and depth of collar 25mm and wheel centre bored 60mm with key slot with six no supporting rives made out of M.S forging /M.S casting E.N.8 materrial as per directed by Engr-in-charge (Make: ISI Marked). |
| 76 | Repair/replacement Sliding gate motors kitfor the automation of sliding gates up to 400 kg , 24V DC, incorporated control unit with following accessories (a) RB 400,irreversible electromechanical gear motor-01 Nos (b)OXI, Reciver -01 Nos (c ) ON2E, Transmitter-01 Nos (d) MOFB, pair of photocell-01 Nos (e) MOSE, key selector -01 Nos (f) MLBT, Flashing Light-01 Nos.And along with repairofautomatic industrial sliding door of size4.9mx3.25m with alignment bottom & top track, replacement of gesketto ensure complete air tightenness along bottom, top and side wall, complete all as specified and directed by Engr-In-charge. (Make:- Nice) |
| 77 | Supply & Fixing in replacementMCB 3 pole, 415V AC, 63 Amp rating 16 KA rupturing capacity,with any retrofit workcomplete all as specified & directed by Engr-in-charge . (Make :L&T /Siemens/Legrand/ABB) |
| 78 | Taking down complete and Supply & fix in replacementgun metal vertical NRV 40mm heavy dutycomplete fitting all as specified & directed by Engr-in-charge. (Make : Prince/sant/Kirloskar) |
| 79 | Servicing of servo voltage stablizer of capacity 100 KVA 415 Volt ,50Hz of make VOLINA disconnecting of all electrical connections of stabilizer and check the auto/manual function of stabilizer, to be check the oil level, oil seals leakage if any, check all volt meters and amp meter working condition or not, Taking out top cover of stabilizer for replacing defective parts/items clean the dust by air blower, check the neutral and earthing connections properly or not, to be done properly, to be check the all nut bolts tightining. and refixing, the same in existing location, and re connect all the incoming/outgoing cables properly including testing and commissioning complete all as specified and as directed by Engr- in- Charge. Note: (i) Spares parts if required shall be measured & paid separately as ‘supply only’ under relevant items. (ii) Labour charge for ‘supply only’ materials are deemed to be included in the quoted rate by the contractor. |
| 80 | Supply onlyservo card as per sample |
| 81 | Supply onlyAmpere meter with C.T (Digital/analog) including necessary connection controlling switches complete (suitable size of shape) complete all as specified and directed by Engr-In-charge. |
| 82 | Supply onlyvoltmeter 0 to 440 volts flush type including necessary connection controlling switches complete (suitable size of shape) complete all as specified and directed by Engr-In-charge. |
| 83 | Supply onlyServo motor 3 K.G. torque single phase complete all as specified and directed by Engr-In-charge. |
| 84 | Supply onlyRotary switch 5 Amp for R. Y. B phase complete all as specified and directed by Engr-In-charge. |
| 85 | Supply onlytrigger transformer complete all as specified and directed by Engr-In-charge. |
| 86 | Supply only Port meter complete all as specified and directed by Engr-In-charge. |
| 87 | Supply onlyAuto manual switch complete all as specified and directed by Engr-In-charge |
| 88 | Supply onlyP.C.B Holder complete all as specified and directed by Engr-In-charge. |
| 89 | Supply onlyContactor strip complete all as specified and directed by Engr-In-charge. |
| 90 | Supply onlyIndicator light complete all as specified and directed by Engr-In-charge. |
| 91 | Supply onlyof dimmer coil 60 amp complete all as specified and directed by Engr-In-charge. |
| 92 | Supply only of Main Transformer 100 KVA complete all as specified and directed by Engr-In-charge. |
| 93 | M&L for replacement ofdamage chemical filter jacketmade out of 3mm SS sheet of size 800mm x490mmor as per existing sample / model . Jacket holding flange s.s round on the upper side of size 40mm x 3mm along with suitable size mounting holes /liftinghook. Wiremess of nominal dia 0.56mm and apperture 1.18mm bend into shape for fixing in side in jacket complete fitting all as specified and directed by Engr-In-charge.(Make:- HS engineering works/USGC/Premerue) |
| 94 | Material and labour for Dismantling carefully of squirrel cage induction electric motor three phase 415 volts ,1410 RPMof capacity1 HP/0.75 KWtaking out the burnt/worn coils from the slots of stator and other accessories such as ball bearing and rotor and cleaning the stator slots and rewinding the same with new super enamelled copper winding with existinggauge, and , varnishing with doctor beck"s insulating varnish and re-assembling the same and testing comissioning complete all as specified anddirected by Egr - in - Charge. |
| 95 | Supply and fixing in replacement of power contactor 3 phase MNX series type or as per existing sample / model of rated capacity 6 Amp to 9 Amp 415volts along with suitable rating of NC/NO type Auxiliary contactor block complete all as specified and directed by Engineer -in-Charge. (Make : MEC/BCH/ ABB/ L&T /Siemen/Schnieder/C&S) |
| 96 | Supply & Fixing in replacementMCB SP 32 Amp , 16 KA,230 Volts completewith any retrofit work complete all as specified & directed by Engr-in-charge. . (Make : L&T /Siemens/Legrand/ABB) |
| 97 | Supply and fixing in replacement of rubber gasket of size 60mmx5mm mounted on hull painting sliding gate by adhesive with flap on both sides along the length of size 3370mm gate complete all as specified & directed by Engr-in-charge. |
| 98 | Supply and fixing in replacement ofMCCB 3 pole, 415V AC, 200 Amp rating 35/36 KA rupturing capacity, thermal magnectic release, complete with any retrofit work, terminal links withthimbles, gland as per requirement inexisting panel complete all as specified and directed. (Make : Legrand/Schneider/L&T/ABB) |
| 99 | M & L of Earth continuity conductor or main earthinglead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc using 32 x 6mm galvanised iron strip complete all as & specified & directed by Engr-in-charge. |
| 100 | Supply and fixing in replacement of defective Car wash Brush suitable for existing automatic car washing plant or as per sample complete all as specified and directed. (Make - as per ISI mark ) |
| 101 | Supply and fixing in replacement ofBrush Rivite forsuitable for automatic car washingbrushor as per sample complete all as specified and directed. (Make - as per ISI mark ) |
| 102 | Supply and fixing in replacement of DOL starter 3 Phase 415 voltsuitable for 3.0 HP pump set complete all as specified and directed. (Make:- L&T/schneider/seimens) |
| 103 | Supply and fixing in replacement ofMCCB 4 pole, 415V AC, 200 Amp rating 35/36 KA rupturing capacity, thermal magnectic release, with SS enclosure box any retrofit work, terminal links withthimbles, gland complete all as specified and directed. (Make : Legrand/Schneider/L&T/ABB) |
| 104 | Supply and fixing in replacement of defective detergent pump capacity as per sample for car washing plant all as specified and directed by Engr-in charge (Make:- KRE or equivalent as per ISI mark ) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
