Rate Contract For Supply, Installation, Testing And Commissioning Of Various Assaying Lab Equipments Under E-Nam Project At Various Fruit And Vegetable Krishi Upaj Mandi Samities In Rajasthan DIGITAL OUTSIDE CALIPER , FRUIT PENETROMETER / FRUIT HARDNES
Tender Value
82.24 Lakhs
Estimated cost
Bid Submission
21 Oct 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
All Rajasthan → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Rate Contract For Supply, Installation, Testing And Commissioning Of Various Assaying Lab Equipments Under E-Nam Project At Various Fruit And Vegetable Krishi Upaj Mandi Samities In Rajasthan DIGITAL OUTSIDE CALIPER , FRUIT PENETROMETER / FRUIT HARDNESS TESTER / SCLEROMETER , ELECTRONIC WEIGHING BALANCE , DIGITAL HAND HELD REFRACTOMETER FOR MEASURING SUGAR CONCENTRATION , PHOTO COLORIMETER , DIGITAL VERNIER CALLIPER , FRUIT PRESSURE TESTER , ETHYLENE ANALYZER , PC CONTROLLED TEXTURE ANALYZER , ETC
BOQ
| Sl. No. | Item Description |
| 1 | Supply of Digital outside caliper for measurement of outside diameter of fruit & vegetable as per specifications below of make as approved by Engineer-in- charge |
| 2 | Range: 0 - 200 mm |
| 3 | Display: LED disply |
| 4 | Power : batteries (included) |
| 5 | Hold mode: Required |
| 6 | Callibration: Precallibrated |
| 7 | Jaws: Stainless steel |
| 8 | Supply of fruit penetrometer/fruit hardness tester/Sclerometeras per specifications belowof make as approved by Engineer-in- charge: |
| 9 | Scale: 0.5 - 4 Kg/sq.cm or higher |
| 10 | Probe size: 3.5mm |
| 11 | Accuracy: +- 0.02 |
| 12 | Insertion Depth: 10 mm or higher |
| 13 | Type: Analog |
| 14 | Supply of Electronic weighing balanceas per specifications belowof make as approved by Engineer-in- charge |
| 15 | Capacity:Upto 3000 Grams |
| 16 | Type: Table top |
| 17 | Least Count :0.01g |
| 18 | Display Type : Front display ,Preferable RED LED /GREEN LED |
| 19 | Calibration Type :External Calibration with One Touch Key |
| 20 | Power Source: 220 Volt AC ,50 Hz along with built in rechargable battery |
| 21 | Pan Size: Minimum 210 x 260 mm |
| 22 | Interface: RS232C |
| 23 | Supply of digital Hand held Refractometer for measuring sugar concentration in fruits as per specifications belowof make as approved by Engineer-in- charge |
| 24 | Measurement Range: Brix 0.0 to 53.0% |
| 25 | Resolution: Brix 0.1% |
| 26 | Accuracy: Brix ±0.2% |
| 27 | Measurement Temperature: 50°F - 212°F (10°C - 100°C) (Automatic Temperature Compensation) (High temperature samples can be measured during heating or cooking. The measured Brix value will stabilize after taking a few repeated measurements). |
| 28 | Ambient temperature: 50°F - 104°F (10 - 40°C) |
| 29 | Power supply: 2 x AAA Batteries |
| 30 | International protection class: IP65 |
| 31 | Display: Digital LCD |
| 32 | Supply of Photo Colorimeteras per specifications belowof make as approved by Engineer-in- charge |
| 33 | Range: 400-700nm |
| 34 | Output OD: 0 to 1.99 |
| 35 | Resolution OD: 0.01 |
| 36 | Accuracy: 0.01 Abs |
| 37 | Detector: Photo cell/Photo diode |
| 38 | Light Source: LED 8 filters-400,450,490,520,540,570,620 & 680nm |
| 39 | Sample System: 10 mm pth length matched glass test tubes |
| 40 | Dust cover: Required |
| 41 | Power Supply: Battery cum mains operation |
| 42 | Supply of digital Vernier Calliperas per specifications belowof make as approved by Engineer-in- charge |
| 43 | Measuring \"Range: 0-300 mm |
| 44 | Resolution: 0.01 mm |
| 45 | Construction: Stainless steel |
| 46 | Power : Batteries |
| 47 | Display: LCD display |
| 48 | Protective Case: Required |
| 49 | Supply ofFruit pressure testeras per specifications belowof make as approved by Engineer-in- charge |
| 50 | Measuring \"Range: Minimum2 - 15 Kg/sq cm |
| 51 | Accuracy: +- 0.1% |
| 52 | Resolution: +-0.1 Kg/sqcm |
| 53 | Plunger Diameter: 3.5 mm |
| 54 | Insertion Depth; 10 mm |
| 55 | Display unit: Kg & Lb |
| 56 | Construction: Stainless steel |
| 57 | Protective Case: Required |
| 58 | Supply ofEthylene Analyzer for measurement of ethylene concentration in fruit as per specifications belowof make as approved by Engineer-in- charge |
| 59 | Air sampling rate: 80ml/min |
| 60 | Display: Sunlight visible transflective LCD |
| 61 | Battery: Rechargable li-ion of 5000mAh |
| 62 | PC interface: usb & sd card |
| 63 | Construction: Anodized alumiium |
| 64 | Sensor type : Electrochemical |
| 65 | Range: 0-10ppm |
| 66 | Resolution: 0.001 ppm |
| 67 | Accuracy: 5% +-0.025ppm |
| 68 | Temperature: 0 to 50 degree celcius |
| 69 | wi fi enabled: Required |
| 70 | Supply ofPC controlled Texture Analyzer for measurement of textural & rheological properties of fruit & vegetable as per specifications belowof make as approved by Engineer-in- charge |
| 71 | Sensors: 50 N(5 Kg) |
| 72 | Resolution: 0.001 N (0.001 gm) |
| 73 | Accuracy: +- 0.05% of full scale |
| 74 | Speed range: 0.1 to 10 10mm/s |
| 75 | Power Supply: 220 V , 50 Hz |
| 76 | Software Requirement:Compatible window based software for finding\"textural & rheological properties of Fruit & vegetables.Software should provide complete data base of different probes & attachments & include comprehensive library of application reports. |
| 77 | Safety Alarm: Indications for overload & excess elongation |
| 78 | Cables: All power cables,serial cables,LAN patch cords etc |
| 79 | The work includes compression platens(50 mm,>75mm)cylindrical probes,spherical probes,conical probes,needle type probes,3 point bend ring,heavy duty platform for sample support along with branded desktop computer with intel core i-5 processor,9 generation,8 GB RAM,original window 10 software,1TB HDD,21.5 inches LED monitor,Monitor Resolution (PIXELS) of 1920x1080,Graphics Type-Integrated,Optical Drive- DVD R/W,Wireless Connectivity ,10/100/1000 on board Integrated Gigabit Port, Optical Scroll Mouse, Standard Keyboard with Rupee Symbol, along with branded laser monochrome laser printer complete in all respect. |
AI Tender Summary
Tender Timeline
Sep 30, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 25, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
Completed