|
| 1 | Group C AmbalaHRY |
| 2 | Supply of Solid State Diode Decoupling Device of approved make including required length of cable as per specifications for protecti on of MOVs and at HT line crossing locations |
| 3 | Installation of solid state decoupling device as per specifications including terminating the cables in the TLP box with cable lugs,sealing material, laying of cable, testing & commissioning of Zinc anodes etc. all complete with required material, excavation, bac kfilling etc. as per specification and directions of Site Engineer/ Engineer-in-Charge. |
| 4 | DAC (With Ingress Protection IP:55)Test Lead Point: Supply, installation, testing & commissioning of Test Lead Point (TLP) fabrica ted MS Sheet (Thickness : 3 mm top/side/rear/front & 5 mm : Bottom plates) with hinged front door, Heavy Guage MS pipe 100 mm nomina l diameter, Phenolic laminated terminal plate, brass terminal bolts, neoprene gasket for front door, vandal proof concealed lock, et c as per latest revision of Standard AFC drawing (9200-99900-404-603-03 : STD-483). The workincludes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site,including MS hard pipe for cable entry through foundation, erection of the TLP overconcrete foundation, termination of cables to the brass terminal bolts inside TLP box, jointing the cables to pipe (using cad weldi ng/ pin brazingtechnique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning thesite, applyingepoxy paint / powder coating etc. The work also includes supply, installation, laying & termination of all XLPE, Cucables of required length (as per site conditions) and size, lugs etc. The work includes supply and fixing of a non-corrosive name plate containing the details like KM location, identification, TLP No., direction of flow, connection scheme, type etc., on the sideof the TLP box, etc. The name plate shall also include the details of corrosion coupon wherever installed, all as per the directionand specification detailed in the document complete with tools, tackles & other necessary requirement. The work complete in all res pects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/E ngineer-In-Charge. |
| 5 | Supply and installation of Corrosion coupon with 1 sq. cm bare metal with 2 lead wire of 5 m each |
| 6 | Zinc Anode for Hot spot protection : Supply, Installation , testing and commisioning of Zinc anode (minimum 10 Kg each) including it s tail cable of size of 1c x 25 sq.mm. XLPE/ PVC insulated stranded copper cable of total length 10 meter including PVC cap, specialback-fill material ( filled in cotton sack) with sealing compound complete in all respect including its excavations, back filling e tc. as per specifications and drawings. The work complete in all respect shall include supply of all labour , tools etc. and shall b e carried out as per the directions of the Site Engineer / Engineer-in-Charge and as per AFC drawings. |
| 7 | Group C AmbalaPB |
| 8 | Supply of Solid State Diode Decoupling Device of approved make including required length of cable as per specifications for protecti on of MOVs and at HT line crossing locations |
| 9 | Installation of solid state decoupling device as per specifications including terminating the cables in the TLP box with cable lugs,sealing material, laying of cable, testing & commissioning of Zinc anodes etc. all complete with required material, excavation, bac kfilling etc. as per specification and directions of Site Engineer/ Engineer-in-Charge. |
| 10 | DAC (With Ingress Protection IP:55)Test Lead Point: Supply, installation, testing & commissioning of Test Lead Point (TLP) fabrica ted MS Sheet (Thickness : 3 mm top/side/rear/front & 5 mm : Bottom plates) with hinged front door, Heavy Guage MS pipe 100 mm nomina l diameter, Phenolic laminated terminal plate, brass terminal bolts, neoprene gasket for front door, vandal proof concealed lock, et c as per latest revision of Standard AFC drawing (9200-99900-404-603-03 : STD-483). The workincludes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site,including MS hard pipe for cable entry through foundation, erection of the TLP overconcrete foundation, termination of cables to the brass terminal bolts inside TLP box, jointing the cables to pipe (using cad weldi ng/ pin brazingtechnique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning thesite, applyingepoxy paint / powder coating etc. The work also includes supply, installation, laying & termination of all XLPE, Cucables of required length (as per site conditions) and size, lugs etc. The work includes supply and fixing of a non-corrosive name plate containing the details like KM location, identification, TLP No., direction of flow, connection scheme, type etc., on the sideof the TLP box, etc. The name plate shall also include the details of corrosion coupon wherever installed, all as per the directionand specification detailed in the document complete with tools, tackles & other necessary requirement. The work complete in all res pects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/E ngineer-In-Charge. |
| 11 | Supply and installation of Corrosion coupon with 1 sq. cm bare metal with 2 lead wire of 5 m each |
| 12 | Zinc Anode for Hot spot protection : Supply, Installation , testing and commisioning of Zinc anode (minimum 10 Kg each) including it s tail cable of size of 1c x 25 sq.mm. XLPE/ PVC insulated stranded copper cable of total length 10 meter including PVC cap, specialback-fill material ( filled in cotton sack) with sealing compound complete in all respect including its excavations, back filling e tc. as per specifications and drawings. The work complete in all respect shall include supply of all labour , tools etc. and shall b e carried out as per the directions of the Site Engineer / Engineer-in-Charge and as per AFC drawings. |
| 13 | Group C AmbalaKRNPL |
| 14 | Supply of Solid State Diode Decoupling Device of approved make including required length of cable as per specifications for protecti on of MOVs and at HT line crossing locations |
| 15 | Installation of solid state decoupling device as per specifications including terminating the cables in the TLP box with cable lugs,sealing material, laying of cable, testing & commissioning of Zinc anodes etc. all complete with required material, excavation, bac kfilling etc. as per specification and directions of Site Engineer/ Engineer-in-Charge. |
| 16 | DAC (With Ingress Protection IP:55)Test Lead Point: Supply, installation, testing & commissioning of Test Lead Point (TLP) fabrica ted MS Sheet (Thickness : 3 mm top/side/rear/front & 5 mm : Bottom plates) with hinged front door, Heavy Guage MS pipe 100 mm nomina l diameter, Phenolic laminated terminal plate, brass terminal bolts, neoprene gasket for front door, vandal proof concealed lock, et c as per latest revision of Standard AFC drawing (9200-99900-404-603-03 : STD-483). The workincludes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site,including MS hard pipe for cable entry through foundation, erection of the TLP overconcrete foundation, termination of cables to the brass terminal bolts inside TLP box, jointing the cables to pipe (using cad weldi ng/ pin brazingtechnique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning thesite, applyingepoxy paint / powder coating etc. The work also includes supply, installation, laying & termination of all XLPE, Cucables of required length (as per site conditions) and size, lugs etc. The work includes supply and fixing of a non-corrosive name plate containing the details like KM location, identification, TLP No., direction of flow, connection scheme, type etc., on the sideof the TLP box, etc. The name plate shall also include the details of corrosion coupon wherever installed, all as per the directionand specification detailed in the document complete with tools, tackles & other necessary requirement. The work complete in all res pects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/E ngineer-In-Charge. |
| 17 | Supply and installation of Corrosion coupon with 1 sq. cm bare metal with 2 lead wire of 5 m each |
| 18 | Zinc Anode for Hot spot protection : Supply, Installation , testing and commisioning of Zinc anode (minimum 10 Kg each) including it s tail cable of size of 1c x 25 sq.mm. XLPE/ PVC insulated stranded copper cable of total length 10 meter including PVC cap, specialback-fill material ( filled in cotton sack) with sealing compound complete in all respect including its excavations, back filling e tc. as per specifications and drawings. The work complete in all respect shall include supply of all labour , tools etc. and shall b e carried out as per the directions of the Site Engineer / Engineer-in-Charge and as per AFC drawings. |
| 19 | Group C Jalandhar MJPL |
| 20 | Supply of Solid State Diode Decoupling Device of approved make including required length of cable as per specifications for protecti on of MOVs and at HT line crossing locations |
| 21 | Installation of solid state decoupling device as per specifications including terminating the cables in the TLP box with cable lugs,sealing material, laying of cable, testing & commissioning of Zinc anodes etc. all complete with required material, excavation, bac kfilling etc. as per specification and directions of Site Engineer/ Engineer-in-Charge. |
| 22 | DAC (With Ingress Protection IP:55)Test Lead Point: Supply, installation, testing & commissioning of Test Lead Point (TLP) fabrica ted MS Sheet (Thickness : 3 mm top/side/rear/front & 5 mm : Bottom plates) with hinged front door, Heavy Guage MS pipe 100 mm nomina l diameter, Phenolic laminated terminal plate, brass terminal bolts, neoprene gasket for front door, vandal proof concealed lock, et c as per latest revision of Standard AFC drawing (9200-99900-404-603-03 : STD-483). The workincludes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site,including MS hard pipe for cable entry through foundation, erection of the TLP overconcrete foundation, termination of cables to the brass terminal bolts inside TLP box, jointing the cables to pipe (using cad weldi ng/ pin brazingtechnique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning thesite, applyingepoxy paint / powder coating etc. The work also includes supply, installation, laying & termination of all XLPE, Cucables of required length (as per site conditions) and size, lugs etc. The work includes supply and fixing of a non-corrosive name plate containing the details like KM location, identification, TLP No., direction of flow, connection scheme, type etc., on the sideof the TLP box, etc. The name plate shall also include the details of corrosion coupon wherever installed, all as per the directionand specification detailed in the document complete with tools, tackles & other necessary requirement. The work complete in all res pects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/E ngineer-In-Charge. |
| 23 | Supply and installation of Corrosion coupon with 1 sq. cm bare metal with 2 lead wire of 5 m each |
| 24 | Zinc Anode for Hot spot protection : Supply, Installation , testing and commisioning of Zinc anode (minimum 10 Kg each) including it s tail cable of size of 1c x 25 sq.mm. XLPE/ PVC insulated stranded copper cable of total length 10 meter including PVC cap, specialback-fill material ( filled in cotton sack) with sealing compound complete in all respect including its excavations, back filling e tc. as per specifications and drawings. The work complete in all respect shall include supply of all labour , tools etc. and shall b e carried out as per the directions of the Site Engineer / Engineer-in-Charge and as per AFC drawings. |
| 25 | Group C Sangrur PB |
| 26 | Supply of Solid State Diode Decoupling Device of approved make including required length of cable as per specifications for protecti on of MOVs and at HT line crossing locations |
| 27 | Installation of solid state decoupling device as per specifications including terminating the cables in the TLP box with cable lugs,sealing material, laying of cable, testing & commissioning of Zinc anodes etc. all complete with required material, excavation, bac kfilling etc. as per specification and directions of Site Engineer/ Engineer-in-Charge. |
| 28 | DAC (With Ingress Protection IP:55)Test Lead Point: Supply, installation, testing & commissioning of Test Lead Point (TLP) fabrica ted MS Sheet (Thickness : 3 mm top/side/rear/front & 5 mm : Bottom plates) with hinged front door, Heavy Guage MS pipe 100 mm nomina l diameter, Phenolic laminated terminal plate, brass terminal bolts, neoprene gasket for front door, vandal proof concealed lock, et c as per latest revision of Standard AFC drawing (9200-99900-404-603-03 : STD-483). The workincludes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site,including MS hard pipe for cable entry through foundation, erection of the TLP overconcrete foundation, termination of cables to the brass terminal bolts inside TLP box, jointing the cables to pipe (using cad weldi ng/ pin brazingtechnique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning thesite, applyingepoxy paint / powder coating etc. The work also includes supply, installation, laying & termination of all XLPE, Cucables of required length (as per site conditions) and size, lugs etc. The work includes supply and fixing of a non-corrosive name plate containing the details like KM location, identification, TLP No., direction of flow, connection scheme, type etc., on the sideof the TLP box, etc. The name plate shall also include the details of corrosion coupon wherever installed, all as per the directionand specification detailed in the document complete with tools, tackles & other necessary requirement. The work complete in all res pects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/E ngineer-In-Charge. |
| 29 | Supply and installation of Corrosion coupon with 1 sq. cm bare metal with 2 lead wire of 5 m each |
| 30 | Zinc Anode for Hot spot protection : Supply, Installation , testing and commisioning of Zinc anode (minimum 10 Kg each) including it s tail cable of size of 1c x 25 sq.mm. XLPE/ PVC insulated stranded copper cable of total length 10 meter including PVC cap, specialback-fill material ( filled in cotton sack) with sealing compound complete in all respect including its excavations, back filling e tc. as per specifications and drawings. The work complete in all respect shall include supply of all labour , tools etc. and shall b e carried out as per the directions of the Site Engineer / Engineer-in-Charge and as per AFC drawings. |
