Indian Army-IA has published Bids Are Invited For Item No. 01 - Outsourcingfor Operation Ofinstallation In Three Shifts Of 8 Hours Per Dayfor Seven Days In A Week With One Pumphouse Operator In Each Shiftat Ph No 2A Consisting Of Following Machineries For Water Supply Including Opera. Submission Date for this Tender is 08-10-2021. Coats and Jackets Tenders in Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Title | Item Description |
| 1 | Item No. 01 | Outsourcingfor operation ofinstallation in three shifts of 8 hours per dayfor seven days in a week with one pumphouse operator in each shiftat PH No 2A consisting of following machineries for water supply including operation of all outgoing valves & Non clog sewage pump electrically driven with motor of capacity 10HP, 415 Volt, 50Hz Make: Kirloskar - 02 forSewage Pump 3. (Only One pump runningat a time other remain standby)all as directed by Engr-in-Charge. all as directed by the Engr-in-charge.(a) Bore well with submersible of pumping set capacity 15 HP, 415 Volts 50 Hz, Make : KSB-01 No. (b) Booster pump of mono block/centrifugal type with electric motor of cap-10HP415 Volts.50HZ - 01 Nos. (c) Booster pump of mono block/centrifugal type with electric motor of cap-15HP415 Volts.50HZ - 01 Nos (d) Liquid Chlorine dozing machine - 1 No (e) Catalytic iron removal plant including air blower fitted with5 HP motor and air compressor fitted with 1 HP motor. (f) Sedimentation tank capacity 10000 GHP cap - 01 No. (g) DG set with electric control panel - 01 No. (h) In addition to above the operator shall be responsible for switching on/off of the street lights/ High Mast Lightswithin the 500mtr distance of the installations.The switching on/Off timing will be provided by the Engr-In-Charge. (j) Non clog sewage pump electrically driven with motor of capacity 10HP, 415 Volt, 50Hz Make: Kirloskar - 02 Nos, installation in sewage Pump House No 3 |
| 2 | Item No. 02 | Outsourcingfor operation of installationin three shifts of 8 hours per dayfor seven days in a weekwith one pumphouse operator in each shift at PH No 2 consisting of following machineries for water supply including operation of all outgoing valves & pipe lines all as directed by the Engr-in-charge.(a) Bore well with submersible pumping set of capacity 30HP, 415 Volts 50 Hz Make - KSB - 01 No. (b) Centrifugal pumping set with electric motor 415 Volt 50 Hz of cap - 10 HP-01 and 15 HP - 01 No(c)Liquid chlorine dozing machine- 01 No(d) Water purification plant (set of - 03) consisting of (i) Oxidation chamber (ii) Pre filter (iii) Iron removal including Air compressor fitted with 2 HP motor - 02 Nos and Air blower fitted with 5HP motor - 02 Nos (e) Sedimentation tankcapacity 10000 GPH cap - 01 No.(f) DG set with electric control panel - 01 N0. (g) In addition to above the operator shall be responsible for switching on/off of the street lights/ High Mast Lightswithin the 500mtr distance of the installations.The switching on/Off timing will be provided by the Engr-In-Charge. |
| 3 | Item No. 03 | Outsourcingfor operation ofinstallation in three shifts of 8 hours per dayfor seven days in a weekwith one pumphouse operator in each shift at PH No 4 consisting of following machineries for water supply including operation of all outgoing valves & pipe lines all as directed by the Engr-in-charge. (a) Bore well with submersible pumping set of capacity 20HP, 415 Volts 50 Hz - 01 No. (b) Booster pump of mono block/centrifugal type with electric motor of capacity 10HP,415 Volts.50HZ - 01 Nos (c) Booster pump of mono block/centrifugal type with electric motor of capacity 15HP, 415 Volts.50HZ - 01 Nos. (d)Liquid chlorine dozing machine (chloro power) - 01 No (e) Sedimentation tank (open type gravity filter) capacity 10000 GPH- 01 No. (f) DG set with electric control panel - 01 N0. (g) Pressure filter of capacity 10000 GHP - 01 No (h) In addition to above the operator shall be responsible for switching on/off of the street lights/ High Mast Lightswithin the 500mtr distance of the installations.The switching on/Off timing will be provided by the Engr-In-Charge. |
| 4 | Item No. 04 | Outsourcingfor operation of installationin three shifts of 8 hours per dayfor seven days in a week at PH No 1A consisting of following machineries for water supply including operation of all outgoing valves & pipe lines all as directed by the Engr-in-charge.(a) Bore well with submersible of pumping set capacity 15 HP, 415 Volts 50 Hz, Make : KSB-01 No.(b) Booster pump of mono block/centrifugal type with electric motor of cap-10 HP 415 Volts.50HZ - 02 Nos(c) Liquid Chlorine dozing machine - 1 No. (d) Water purification plant (Set of -03) consisting of (i) Oxidation chamber (ii) Pre Filter (iii) Iron removal incl AIr-Compressor fitted with 2HP Motor - 02 Nos and Air Blower fitted with 5 HP Motor -02 Nos(e) Sedimentation tank capacity 10000 GHP cap - 01 No (g) DG set with electric control panel - 01 No. (h) In addition to above the operator shall be responsible for switching on/off of the street lights/ High Mast Lightswithin the 500mtr distance of the installations.The switching on/Off timing will be provided by the Engr-In-Charge. |
| 5 | Item No. 05 | EPF( As applicable Employer contribution as per EPF act 1952, as ammended from time to time) current contribution is 13 % |
| 6 | Item No. 06 | ESI (Employer contribution as per ESI act 1948, as ammended from time to time) current contribution is 3.25 % |
| 7 | Item No. 07 | Contribution towadrs Bonus (as per Bonus act 1965, as ammended from time to time) current contribution is 8.33 % of gross salary |
| 8 | Item No. 08 | Overhead and profit |
| 9 | Item No. 09 | Labour welfare cess (min 1%) on sum of Basic, EPF, ESI ,Bonus and profit. |
| 10 | Item No. 10 | Chemical analysis of water collected of one bottle of treated water (filtered water) and One bottle of untreated water (ground water) collected from different pump houses of GE (AF) Tezpur are forwarded herewith as sample for iron contents with standards of quality for drinking water at Defence Research Laboratory (DRL) Tezpur (Assam) and putup the certificate sepreatly for each semple to Engineer-in-chargeonesin a conterect periode complete all as specified and as directed |
| 11 | Item No. 11 | Supply only poly aluminium chloride powder (raw water flocculant powder) Make : As per Sample. |
| 12 | Item No. 12 | Calcium hypochlorite (Calcium based granular disinfectant) Make : Aquafit. |
| 13 | Item No. 13 | Supply and fix in repairsvitreous china squatting pan,”Orissa” pattern, size 580mmX440mm, white, with integral foot rests, ‘S’ trap (excluding flushing cistern and flush pipe) and provision of lime concrete bedding including demolition fo existing WC and removal of debris from the site complete all as directed. |
| 14 | Item No. 14 | Supply and fix in repair 10 litres capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. |
| 15 | Item No. 15 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) notexceeding 1.5 sqm eachcomplete all as directed. |
| 16 | Item No. 16 | Supply and fix for PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed. |
| 17 | Item No. 17 | Supply and fix for factory made PVC door shutter 30mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and as directed. |
| 18 | Item No. 18 | Supply and fixbutt hinges 75mm long cold rolled medium weight complete all as specified and as directed. |
| 19 | Item No. 19 | Supply and fix for 150mm long aluminium handles, cast type, anodised complete all as specified and as directed. |
| 20 | Item No. 20 | Supply and fix infor 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 21 | Item No. 21 | Supply and fix infor anodized aluminium frame for window with one or more rebates, anodized aluminium window, sliding type shutters, sliding on two way aluminium channel, without sash bars, sliding on separate track, made out of aluminium section weighing 0.55 Kg/RM and necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, fittings such as suitable anodized aluminium locking type handle etc. and of 4mm thick sheet glass, tinted including taking down the exsting windows complete all as specified and as directed. |
| 22 | Item No. 22 | Material & Labour for 75mm thick cement concrete type C2 1:3:6 (40 mm graded aggregate) as in plinth protection including finishing surfaces even and smooth without using extra cement including demoliton of cement concrete (unreinforced) complete all as directed by Engr in charge. |
| 23 | Item No. 23 | Material and labour for prepration of old plastered or unplastered surfaces and applying one coat ofoil bound distemper complete all as specified and directed. |
| 24 | Item No. 24 | Supply and fixbutt hinges 100mm long cold rolled medium weight complete all as specified and as directed. |
| 25 | Item No. 25 | Supply and fix150mm long mild steel pressed handles, oval type, stove enameled black complete all as specified and as directed. |
| 26 | Item No. 26 | S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long all as specified and directed by Engineer - in – Charge . |
| 27 | Item No. 27 | Supply and fix250mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed. |
| 28 | Item No. 28 | Supply and fix in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 29 | Item No. 29 | Supply and fix in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. |
| 30 | Item No. 30 | Supply and fix in repair for vitreous chinawash basin, white, flat back,size of 550mm x 400mm including cutting for and pinning in ends of bracket or erecting stand and including 32mm dia waste pipe & brackets including waste coupling of size 32/40 ofPTMT complete all as specified and as directed. |
| 31 | Item No. 31 | S&F in repair waste pvc pipe 950mm long forkitchen sink/ wash basincomplete all as specified and directed |
| 32 | Item No. 32 | Supply and fix in repair 15mm stop valve/ angular stop cock fancy type chromium plated alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or union complete all as specified and as directed. |
| 33 | Item No. 33 | Supply and fix in repair 15mm bore bib taps, chromium plated with CP flange screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 34 | Item No. 34 | Supply and fix in repair 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with aluminium screws and fixing two nos bracket washers complete all as specified and as directed. |
| 35 | Item No. 35 | S & F in repairshower rose 65mm size PTMTswivel jointwith arm any size including fixing to steel pipe or union all as specified and directed Make- Prayag -181 CERA, Essco, parryware and equivalent. |
| 36 | Item No. 36 | M&L 10 mm thick cement plaster in CM (1:6) on lath fair faces of brick work incl finished even and smooth without using extra cementincluding taking down cement plaster , raking out joints, hacking for key, scrubbing down with water and preparation of the newly plastered surfaces and applying two coat ofOil bound distemperover a coat of cement primer etc all as specified and directed . |
| 37 | Item No. 37 | M&L 15 mm thick cement plaster in CM (1:4) in two layers (5mm thick with approved water proofing compound over backing layer of 10 mm thick )on fair faces of brick work incl finished even and smooth without using extra cement. (WPC @ 2% of cement, will be paid separately ) and preparation of the newly plastered surfaces and applying two coat of cement based paint over a coat ofprimer etc all as specified and directed |
| 38 | Item No. 38 | Material and labour coloured glazed ceramic tiles 450mm x 300 mmx 7 mm thickas in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick plaster in CM(1:3) on brick work for fixing of tile and dismantling the existing tilescomplete all as specified and as directed |
| 39 | Item No. 39 | Material and labour non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (400x400mm) as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed orbedding layer in CM (1:6) for laying floor finishes and dimantling the existing floor tiles complete all as specified and as directed. |
| 40 | Item No. 40 | M&L Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc, deposited, spread and levelled in layers n exc 15cm thick, watered and rolled / rammed to a true surface. |
| 41 | Item No. 41 | Materials and labour for 100mm thick plain cement concrete (1:4:8) type D2 using 40mm graded aggregates as in path, hard standing complete all as specified and directed. |
| 42 | Item No. 42 | Materials and labour for 40mm thick plain cement concrete (1:2:4) type D2 using 40mm graded aggregates as in path, hard standing complete all as specified and directed. |
| 43 | Item No. 43 | Supply and fix in repair 15mm bore bib taps, chromium plated with CP flange screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 44 | Item No. 44 | Supply and fix in repair 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with aluminium screws and fixing two nos bracket washers complete all as specified and as directed. |
| 45 | Item No. 45 | S & F in repairshower rose 65mm size PTMTswivel jointwith arm any size including fixing to steel pipe or union all as specified and directed Make- Prayag -181 CERA, Essco, parryware and equivalent. |
| 46 | Item No. 46 | M&L 10 mm thick cement plaster in CM (1:6) on lath fair faces of brick work incl finished even and smooth without using extra cementincluding taking down cement plaster , raking out joints, hacking for key, scrubbing down with water and preparation of the newly plastered surfaces and applying two coat ofOil bound distemperover a coat of cement primer etc all as specified and directed . |
| 47 | Item No. 47 | M&L 15 mm thick cement plaster in CM (1:4) in two layers (5mm thick with approved water proofing compound over backing layer of 10 mm thick )on fair faces of brick work incl finished even and smooth without using extra cement. (WPC @ 2% of cement, will be paid separately ) and preparation of the newly plastered surfaces and applying two coat of cement based paint over a coat ofprimer etc all as specified and directed |
| 48 | Item No. 48 | Material and labour coloured glazed ceramic tiles 450mm x 300 mmx 7 mm thickas in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick plaster in CM(1:3) on brick work for fixing of tile and dismantling the existing tilescomplete all as specified and as directed |
| 49 | Item No. 49 | Material and labour non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (400x400mm) as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed orbedding layer in CM (1:6) for laying floor finishes and dimantling the existing floor tiles complete all as specified and as directed. |
| 50 | Item No. 50 | M&L Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc, deposited, spread and levelled in layers n exc 15cm thick, watered and rolled / rammed to a true surface. |
| 51 | Item No. 51 | Materials and labour for 100mm thick plain cement concrete (1:4:8) type D2 using 40mm graded aggregates as in path, hard standing complete all as specified and directed. |
| 52 | Item No. 52 | Materials and labour for 40mm thick plain cement concrete (1:2:4) type D2 using 40mm graded aggregates as in path, hard standing complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
