|
| 1 | WATER TREATMENT PLANT (WTP)Design, construction, testing & commissioning of 1.00 MLD capacity Water treatment plant including inlet channel, Alum dozing, Flash mixing, Clarifloculator, filter box, over head Reservoir for back wash, waste water tank including all civil work, pumping machineries and electric cabling, control panels, entire piping network of suitable size laying the DI pipe from raw water pump to inlet box of WTP, WTP to CWT & Suction Well for CW including DI specials, suitable size Sluice valves, Hodies, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed complete in all respects as per NIT (Sluice valves of make IVC/VAG) . |
| 2 | PUMPING MACHINERYRAW WATER PUMPING MACHINERYSupplying, erection, testing and commissioning of Horizontal motor pumping set for raw water having headas per the indicated requirements of discharge in LPM and power capacity in BHPMake: IS per is markedWATER WORKS 1600 LPM X 12 M. Head |
| 3 | PANEL BOARDS FOR MOTORS Supply, erection, testing & commissioning of wall mounted electricalL.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm and 400 mm deep having follwing itemsRef. no. 1.1.1: For 2 no Pumping Sets of 1600 LPM x 12 m Heada) Main switch 100 amp. 2 No. (L&T Siemens, ABB)b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T)c) Digital Multi function meter = 1 No.d) SPP = 1 No. of approved makee) Motor starter, Star delta for 1600 LPM x 12 m Head= 2 Nos(L&T Siemens, ABB)f) VSS 1 No.& ASS 2 Nos. of approved make.g)Capacitor KVAR as per site requirement = 1 No.h) Indicating Lamp= One Seti) Change over switch of suitable Amp = 1 No. (Each) |
| 4 | For Clear water P/M: For 2 no Pumping Sets of 1600 LPM x 40 m Heada) Main switch 100 amp. 2 No. (L&T Siemens, ABB)b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T)c) Digital Multi function meter = 1 No.d) SPP = 1 No. of approved makee) Motor starter, Star delta for 1600LPM x 40 m Head= 2 Nos(L&T Siemens, ABB)f) VSS 1 No.& ASS 2 Nos. of approved make.g)Capacitor KVAR as per site requirement = 1 No.h) Indicating Lamp= One Seti) Change over switch of suitable Amp = 1 No. (Each) |
| 5 | Supply, erection, testing & commissioning of IS marked copper wire for various motors with underground system in PVC and flexible pipes copper wire 3 core complete in all respevts with accessorieslike thimble etc.10mm2 3core |
| 6 | 25mm2 3core |
| 7 | Operation & MaintenanceOperation & maintenance for the complete scope of work mentioned in the DNIT (Disinfection material will be supplied by the PHED) as per schedule-IV during Defect liability period of 12 months after trial run period of 3 months& 5 years thereafter. (Will be charged to A/mtc estimate).\"Maintenenece during defect liability period ( Operation Only) |
| 8 | Operation & maintenance during 1st year |
| 9 | Operation and maintenance during 2nd year |
| 10 | Operation and maintenance during 3rd year |
| 11 | Operation and maintenance during 4th year |
| 12 | Operation and maintenance during 5th year |
