Repair Work Of Hostel (Luv-Kush-2) At 1St Rac Bn. Jodhpur Repair Work Of Hostel (Luv-Kush-2) At 1St Rac Bn. Jodhpur
Tender Value
35.40 Lakhs
Estimated cost
Bid Submission
06 Oct 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Work Of Hostel (Luv-Kush-2) At 1St Rac Bn. Jodhpur Repair Work Of Hostel (Luv-Kush-2) At 1St Rac Bn. Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | PART - A \"CIVIL WORK\"Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50mtr lead |
| 2 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished:20 mm thick. |
| 3 | Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete |
| 4 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. |
| 5 | Painting with weather coat paint (ISI make paint) two or more coat to give an even shade on new work. |
| 6 | Repair to stone masonary in cement sand mortar 1:6 with old and new stone. |
| 7 | Half brick masonry in foundation & plinth using bricks of designation 75 with nominal hoop reinforcement (2 Nos. 6mm MS bar) at every fourth course Cement Sand mortar 1:6 (1-Cement:6-coarse sand). |
| 8 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick. |
| 9 | Supplying and fixing machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges: Kota stone 25 to 30 mm thick. |
| 10 | Earth work in surface excavation not exceeding 30cm. in depth but exceeding 1.5 meter in width as well as10 Sqm on plan including disposal of excavated earth up to 50 Mtr. and lift up to 1.5 Mtr. disposed soil to be levelled and neatly dressed:All kinds of soil |
| 11 | Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer-in-charge :bituminous road (average thickness 300 mm) |
| 12 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 13 | Fine dressed & machine cut edges 30-35 mm thicksand stone flooring over 20 mm (average) thick base of cement mortar1:4 (1 cement: 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI. Red sand stone (Karauli stone) |
| 14 | Pointing on stone slab ceiling with cement mortar 1:3 (1-Cement:3-Sand) : Raised pointing |
| 15 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formaldehye resin, in glue both sides with approved steel fittings complete as per Annexure ‘A’ IS 2202 (Part I & II) 1999/1983. Commercial Veneer both side 30 mm thick shutter |
| 16 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 17 | Labour charges for repair of wooden double leaf door including cutting old damaged wood, panel, chieselling and refixing including screws etc. complete in all respect as per direction of Engineer incharge. Excluding cost of material. |
| 18 | Pointing on stone masonary in cement sand mortar 1:3 (1-Cement:3-Sand) : Deep grooved pointing |
| 19 | Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing ofIS 3316-1974 : South (Red /Choclate Colour) Above 3601 Cm2 Slab |
| 20 | Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade :Old steel work (One or more coats). |
| 21 | Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade : Old wood work(One or more coats). |
| 22 | P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors :Exposed on wall a) 15 mm dia nominal bore. |
| 23 | b) 25 mm dia nominal bore. |
| 24 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 15mm nominal bore. |
| 25 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 25mm nominal bore. |
| 26 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 580 mm x 430 mm |
| 27 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. 1000 litres capacity. |
| 28 | Random Rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in : ement Mortar 1:5 ( 1-Cement : 5-Sand). |
| 29 | Add extra for Random Rubble stone masonry with hard stone in Square or Rectangular pillars |
| 30 | Add extra for facing as per design and detailed specifications including additional cost of stonesCourse rubble facing First sort. |
| 31 | Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by hydrulic pressed, laid in required Grey/Yellow/Red or any other colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge: 80 mm thick c.c. paver block of M-30 grade with approved color design and pattern. |
| 32 | PART - B \"ELECTRICWORK\"Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI markedMMS ( IS:9537 P - III ) PVC conduit & it\"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& false ceiling point,6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. Group - 2(A) Short point (up to 3 mtr.) |
| 33 | (B) Medium point (up to 6 mtr.) |
| 34 | (C) Long point(up to 10 mtr..) |
| 35 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it\"s accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board ,6 Aswitch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.Group-2 (A) On board |
| 36 | (B) Short point (up to 3 mtr.) |
| 37 | (C) Medium point (up to 6 mtr.) |
| 38 | (D) Long point(up to 10 mtr..) |
| 39 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall, covering conduit with Wire mesh and making good the same as required. Group-2 (A) 20 mm |
| 40 | (B) 25 mm |
| 41 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost ofmodular 16 amp. Switch and socket outlet, making connection , testing , etc. as required. Group -2 |
| 42 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required. Group -1(A) 3x 1.5 sq.mm |
| 43 | (B) 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 44 | (C) 4 x 6.0 sq.mm |
| 45 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. (a) Single pole MCB 6 A to 32 A rating |
| 46 | (b)Double pole MCB 40 A 63 A rating |
| 47 | P & F 1200 mm sweep BEE 5 staqr rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374: 1979 , I/p 50 watt at max speed & 230 volt , air delivery >210 CMM, speed >330 RPM with down rod upto 30 cm with 3x1.5 sqmm pvc insulated flexible copper conductor marking connection testing etc. as required |
| 48 | P & F IS:371 marked6 amp surface type ceiling rose including making connection testing etc. as required. |
| 49 | P & F ISI marked6 amp bakelite batten/angle holder including making connection testing etc. as required. |
| 50 | P & F ofIP 20 LED tube light 20 watt external batten mode from CRCa sheet steel suitable to replace T-8/T-12 tube light, integral driver ,2000 luman +5% tolerance system kuman efficiancy of 25000 burning hours, CCT 5700 K, ANSI , CRI 80 driver efficiency>85%, life expectancy of driver min 30000 hrs. PF 0.95 at full load/ 230 valt AC. |
| 51 | P & F 18 SWG Sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surface or in recessed as required. 200mm x 250mm x 100mm |
| 52 | 250mm x 300mm x 100mm |
| 53 | P & F paper phenolic resin bondedlaminates confirming to IS : 2036 -1995 for boxes/ frames including making holes for switches etc, with brass screws, washers/ zinc platednut and bolts as required. 3.0 mm thick |
| 54 | P & F ISI marked (IS :3854) 6 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. |
| 55 | P & F ISI marked (IS :3854) 16 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. |
| 56 | P & F ISI marked (IS :1293) 3 pin 6 amp. flush type socket including cutting hole in tile and making connection testing etc. as required. |
| 57 | P & F ISI marked (IS :1293) 3/6 pin 16 amp flush type socket including cutting hole in tile and making connection testing etc. as required. |
| 58 | P&F of Resistance type regulator of approved make including cutting of sheet, nut bolts, making connections etc as reqd. |
AI Tender Summary
Tender Timeline
Sep 28, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 07, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender