Public Health Engineering Department-PHED has published Design And Construction Of Retrofitting Of Piped Water Supply Schemes Under Jal Jivan Mission At Village 1. Kasai Dehariya 2. Bhanpura 3. Parsukhedi 4. Gangapur Of Block Agar And Badod Distt. Agar Malwa. Submission Date for this Tender is 12-10-2021. Water Supply Project Tenders in AGAR Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Oct-2021 | Technical | Technical Bid | 12-10-2021 |
| 2 | 12-Oct-2021 | Other | Technical Bid | 12-10-2021 |
| Sl. No. | Item Description |
| 1 | Design and Construction of retrofitting of Piped Water supply schemes under jal Jivan Mission at Village 1. Kasai Dehariya2. Bhanpura 3. Parsukhedi 4. Gangapur of Block – Agar/Badod Distt. Agar-Malwa based on Tube Wells including installation of electric submersible/centrifugal water motor pumps, Construction of 01 Nos. R.C.C. over head tanks (01 No.-100/15 staging), 04 Nos. Sumpwells (02 No.-30 KL, 01 No.-20 KL, 01 No.-50 KL), pump houses, laying and jointing of rising main, distribution pipe line system, household tap connections, electric power connections at Tube wells/Sumpwells etc including cost of all material and labour with testing commissioning thereafter 90 Days of successful Trial Run of entire scheme. |
| 2 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 m lead as per direction of engineer-in- charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) USOR. Item.no.16.15.1-P.no.209 |
| 3 | Earth work in Excavation for pipe trench in all kinds of soil and WBM in areas including dressing, watering and ramming and disposal of Excavated earth lead upto 50 meters and lift upto 1.5m, disposal earth to be leveled, neatly dressed.USOR. Item.no. 16.4 -P.no. 207 |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. Soft rock with or without blasting or bituminous pavement / cement concrete road In ordinary or Soft rock with or without blasting or bituminous pavement / cement concrete road. USOR.Item.no. 16.6 (a) -P.no.208 |
| 5 | Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) USOR.Item.no. 9.1 -P.no.122 110 mm dia HDPE 6 Kg/cm² |
| 6 | Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) USOR.Item.no. 9.1 -P.no.122 90 mm dia HDPE 6 Kg/cm² |
| 7 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. USOR.Item.no. 9.14.1.9/129Electro Fusion Coupler 110 mm |
| 8 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. USOR.Item.no. 9.14.1.8/129Electro Fusion Coupler 90 mm |
| 9 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. USOR.Item.no. 9.14.2.9/130 Electro Fusion Equal Tee 110 mm |
| 10 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. USOR.Item.no. 9.14.2.8/130Electro Fusion Equal Tee 90 mm |
| 11 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. USOR.Item.no. 9.14.3.9/130 Electro FusionElbow 90°110 mm |
| 12 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. USOR.Item.no. 9.14.3.8/130 Electro FusionElbow 90°90 mm |
| 13 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. USOR.Item.no. 9.14.4.13/131 Electro Fusion Reducer 110 mm x90 mm |
| 14 | Providing and laying including testing End Cap confirming to ISspecifications..USOR Item.no. 9.8 -P.no.124 90 mm - 6 Kg /cm² |
| 15 | Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete CLASS PN- 10 USOR. Item.no.4.41-P.no. 7180mm dia |
| 16 | Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete CLASS PN- 10 USOR. Item.no.4.41-P.no. 71100mm dia |
| 17 | Filling available excavated earth in trenches, lead up to 50m and lift upto 1.5 m in all kind of soil excluding watering and ramming. USOR. Item.no. 16.10b -P.no 208 |
| 18 | Supplying and laying of submersible flat cable ISImarked 3 core copper wire of suitable size with properclamping of approved make.USOR.Item.no. 24.20.107 -P.no 267 4 Sq mm |
| 19 | Providing and jointing of following galvanized Iron (MS) Pipes class medium with heavy duty seamless sockets for lowering of submersible pumps including testing of joints, cost of pipes & heavy duty sockets and jointing materials all complete. Pipes and sockets confirming to IS:1239-2011 Part-II. USORII nd amendment wef.06.08.2020 item no. 17.38 page no . 03 50 mm dia, class medium with heavy duty seamless sockets |
| 20 | Providing and jointing of following galvanized Iron (MS) Pipes class medium with heavy duty seamless sockets for lowering of submersible pumps including testing of joints, cost of pipes & heavy duty sockets and jointing materials all complete. Pipes and sockets confirming to IS:1239-2011 Part-II. USORII nd amendment wef.06.08.2020 item no. 17.38 page no . 03 65 mmdia, class medium with heavy duty seamless sockets |
| 21 | Supply & erection of readymade mini pump house (control panel box) GIsheet of 18 gauge of size 90cmx90cm x60cm with 40x40x5mm angle Iron frame to fix it 200mm below ground level with hold fasts grouted in foundation and 300mm above ground level for clearance suitable for fixing of control panel, fuse unit, main switch etc. as per approved specification USOR. 17.18/228 |
| 22 | Supplying & Installation of Five star BEE rating ISI Marked required capacity of Three phase, 50 Hz, 415V, Open well Submersible pump, with Control Panel Starter with Dry Run Protection, single phase preventer, connections, etc. as required as per specifications but excluding pipe and connectioncable. 5-10 H.P. Head Mt.15-55, Discharge LPM 930-420 Headmake –Falcon ,Kirloskar, Texmo USOR. 24.20.13/268 |
| 23 | Supplying & Installation of Energy efficiant 3 star BEErating ISI Marked required capacity of Three Phase, 50 Hz,415V, deep well submersible pump Steel body, suitable for6"tube well with Control Panel Starter suitable for Submersible pump with dry run protection, single phase preventer, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe andconnection cable.I 0 H. P. with 20 stages, Head Mt. I 84-80 Discharge LPM 60-270 Headmake –Falcon ,Kirloskar, Texmo USOR. amendment 23.04.2021 item no. 24.20 106-_ A ix |
| 24 | Providing & laying mechanically mixed cement concrete 20mm nominal size graded crushed stone excluding cost of centering & shuttering. M- 20 1:11/2:3 USOR. 16.23(a)iiI/210 |
| 25 | Construction of Brick masonry valve chamber with 20 cm thick wall in 1:6 C.M. with 12mm thick 1:4 Cement Plaster andbase course 10 cm. thick in M-15. Inside Dimensions90x60x100cm with - M-20 RCC chamber cover size 130cm x 100cm x 12cmincluding cost of materials, labour etc. complete. USORII nd amendment wef.06.08.2020 item no. 17.46.1 page no . 07 |
| 26 | Provision for jointing of Rising main tosupmp well/OHT and OHT toDistribution pipe line with cost of material/specials such as Bends, MTAas per rerquirement of site i/c cost of labour with excavation, labour as perrequirement complete as per approved specification and as directed byEngineer in charge. [ USOR 17.20/229] |
| 27 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items. For connection with 20 mm dia MDPE pipe upto 5 meter and road crossing is not required. (Distribution pipe line is on the same side of house) Part-II. 17.41.3/P.no.4 New Item |
| 28 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items.For connection with 20 mm dia MDPE pipe upto 5 meter and CONCRETE ROAD CROSSING is necessary. Part-II. 17.41.1/P.no.4 New Item |
| 29 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items. For connection with 20 mm dia MDPE pipe upto 5 meter and up to 10 meter CONCRETE ROAD CROSSING is necessary. Part-II. 17.41.2/P.no.4 New Item |
| 30 | Design, drawing, construction, testing and commissioning of Elevated Service Reservoir/ Over Head Tank (ESR/OHT) with all necessary fitting as mentioned in relevant chapter of USOR, IS codes and departmental guidelines. Complete turn key job for following capacities with 9/12/15 meter staging height from GL :- 100 KL 15 m USORII nd amendment wef.06.08.2020 item no. 26.1.3page no . 14 |
| 31 | Design, drawing, construction, testing and commissioning of GSR/Sumpwell of following capacities with all necessary fitting and accessories as mentioned in the relevant chapter of USOR, IS codes and departmental circulars. Complete turn key job for following capacities :-30Kilo LitresUSORII nd amendment wef.06.08.2020 item no. 26.2.2 page no . 17 |
| 32 | Design, drawing, construction, testing and commissioning of GSR/Sumpwell of following capacities with all necessary fitting and accessories as mentioned in the relevant chapter of USOR, IS codes and departmental circulars. Complete turn key job for following capacities :-20Kilo Litres USORII nd amendment wef.06.08.2020 item no. 26.2.1 page no . 17 |
| 33 | Design, drawing, construction, testing and commissioning of GSR/Sumpwell of following capacities with all necessary fitting and accessories as mentioned in the relevant chapter of USOR, IS codes and departmental circulars. Complete turn key job for following capacities :- 50Kilo Litres USORII nd amendment wef.06.08.2020 item no. 26.2.4 page no . 17 |
| 34 | Design and Construction of RCC framed brick masonry pump house over the sump with all necessary fitting and requirement as mentioned in relevant chapter of USOR, IS codes and departmental guidelines. Complete turn key job. This item will only be used with item no 26.2 only in cases where pumphouse to be constructed above the proposed sumpwell.USORII nd amendment wef.06.08.2020 item no. 26.3page no . 18 |
| 35 | Supply, delivery, erection and commissioning of the mico processor based water disinfection equipment using silver ionization process based on Oligodynamic technology as per detailed specifications mentioned in the NIT. Rates as per CE PHED Indore Zone indore letter No. 160 Dt. 25.07.2020, 15000 LPH capacity. |
| 36 | Electrical Items Electrical Items 11 KV line on 140 kg. 8.0 Mtrs. long PCC Poles with rabbit conductor average span of 70 mtr. in rural area. |
| 37 | 11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for tapping DP. |
| 38 | 11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for straight line. |
| 39 | 11/0.4 KV out-door type transformer sub-station. 25 KVA on 140 kg. 8.0 meter long PCC Pole Including labour Complete. (Schedule Ref. E-1.1 of MPPKVVCL SOR 2021-22) |
| 40 | L.T. Line 1 phase 3 wire on PCC support using Aerail Bunched XLPE cable with maximum span of 50 Meter. 2 x 35+ 1 x 16 sq. mm (Insulated nuetral massenger) |
| 41 | Fabrication, providing and fixing of typical information board of size 2.40 m x 1.80 m made out as detailed below - 1. Three vertical support made out from 100 mm x 50 mm , 6.0 mm thick channel. This shall be minimum 1.0 m below GL and 3.00 m above GL. The Channel shall be erected on 600 mm x 600 mm x 1000 mm foundation blocks at appropriate depth made of cement concrete 1:2:4. 2.The board shall be fabricated from 1.6 mm thick MS sheet of size 2.40 m x 1.80 m, The frame of board shall be fabricated with 50 mm x 50 mm x 5 thick angle with one horizontal additional support in center with same angle. 3. Whole structure shall be painted by standard color with lettering border, heading and logo etc using synthetic enamel paint of superior quality including welding, excavation, concreting , painting of base, border and lettering, painting and other required details etc complete as directed by Engineer in charge. USOR Amendment 17.47 PN-7 Wef. 06-08-2020 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
