Bids Are Invited For Renewal Of Hull Plate On Board Dss Vessel M.V Spike - Hull Plating: Cropping And Renewal Of Steel Plates At Various Places Of Ship’S Underwater Hull, Ship Side ( Above Waterline And Below Main Deck ) , Tanks, Confined Tanks, Doubl

Sharing tender

Bids Are Invited For Renewal Of Hull Plate On Board Dss Vessel M.V Spike - Hull Plating: Cropping And Renewal Of Steel Plates At Various Places Of Ship’S Underwater Hull, Ship Side ( Above Waterline And Below Main Deck ) , Tanks, Confined Tanks, Double Bottom Tanks, Engine Room, Steering Compartment, Enclosed Places, Pump Rooms, Ship’S Keel, Skeges, Nose, Rudder And A-Bracket, Curvature And Rudder Trunk Including Proper Cleaning Of Worksite, Renewal Of Shellframes ( Transverse And Longitudinal ) , Brackets, Foundation, Bulk Heads, Girders Coaming Etc. From M.S.Plate / Angles Etc. Will Be Calculatedas Steel Renewal At Same Rate.Note1: “While Carrying Out Plate Renewal Works It Shall Be Ensured That Alignment Is Not Disturbed / Altered. It Shall Be The Responsibility Of The Contractor To Rectify The Defects Free Of Cost.”Note2:-The Inner Surface Of The Renewed And Welded Steel Plates Supplied By The Department For Renewal Has To Be Coated With 02 Coats Of Primer Paint Of Make:Jotun / Akzonobel / Sigma. This Will Form Part Of Scope Of Work And Shall Be Undertaken By The Firm With Supply Of Paints And Labour Charges At The Quoted Price.Rates Quoted Including Irs Approved Consumables & Labour Charges. M.S.Plates, Angles, Flats Etc. Shall Be Supplied By Department , Renewal Of Deck Plate On Board Dss Vessel M.V Spike - Deck Platingcropping And Renewal Of Steel Plates At Various Places Of Ship’Sdeck And Superstructure On-Board Dss Vessels Including Degutting And Regutting Of Paneling, Removal And Re-Fitment Of Existing Glass Wool, Plywood, Sunmica, Wooden Frames, Electrical Fittings, Cables Etc. If Found Reusable. The Work Includes Cleaning Of Work Site, Renewal Of Stiffeners, Flat Plate Bracket, Shell Frames / Bottom Floor, Foundation, Deck Beams / Grinders, Bulkheads, Deck Fittings, Eye Plates, Cleats Coaming, Stanchion, Stanchion Shoes Etc., Coming On The Way Of Plate Renewal Will Be Part Of Plate Renewal. Manufacturing / Fabrication And Fitment Of Items Like Foundation, Bollards, Towign Post, Frames Brackets, Grinder, Coaming, Cleats, Manhole Cover, Hatches, Bulwark, Wheel Top, Ramp Boom, Guard Rails, Pipng Work, Ventilation Flaps, Air Vent, And System Piplines Etc. From Ms Plate / Angles / G.I Or Ms Pipe Etc. Will Be Calculated As Steel Renewal At The Same Rate.Note1:- The Inner Suface Of The Renewedand Welded Steel Plates Supplied By The Department For Renewal Has To Be Coated With 02 Coats Of Primer Pint Of Make: Jotun / Akzonobel / Sigma. This Will Form Part Of Scope Of Work And Shall Be Undertaken By The Firm With Supply Of Paints And Labour Charges At The Quoted Price.Rates Quoted Including Irs Approved Consumables & Labour Charges.M.S.Plates, Angles, Flats Etc. Shall Be Supplied By The Department. Total Quantity : 1