Provn Of Geyser For Md Accn And Provn Of Water Supply At Runway Controller Huts At Af Stn Naliya Provn Of Geyser For Md Accn And Provn Of Water Supply At Runway Controller Huts At Af Stn Naliya
Tender Value
28 Lakhs
Estimated cost
Bid Submission
16 Oct 2021
0 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Naliya → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provn Of Geyser For Md Accn And Provn Of Water Supply At Runway Controller Huts At Af Stn Naliya Provn Of Geyser For Md Accn And Provn Of Water Supply At Runway Controller Huts At Af Stn Naliya
BOQ
| Sl. No. | Item Description |
| 1 | S&F stop valves 15 mm dia,fancy type chromium plated all as specified and as directed. |
| 2 | S&F Bib taps 15 mm dia cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed |
| 3 | M & L for wiring with copper conductor cables in PVC casing & caping one 3 pin socket outlet, 15 Amps , independent , with cables 4 sq mm size complete all as specified and directed. |
| 4 | M & L for switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified. |
| 5 | S & F instant water geyser of capacity 3 ltr , 3 KW single phase , 230 volts vertically mounted complete all as specified and directed. |
| 6 | S&F in replacement sub main wiring drawing through PVC casing and capping with two single core 2.5 sq mm and one run of 2.5 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts gradeall as directed |
| 7 | M&L for sheet metal enclosures with socket and plug top and MCB single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 amp 230 volts |
| 8 | S&F Water heater 25 ltr capacity fiber body, mild steel inner container material 4 star rating,2 KW vertical type with safety valve and copper heating element,single phase ,50 Hz ,including Hot and cold water PVC pipe all as specified. |
| 9 | S&F MCB SPN 32Amp. 240 volts, 10KA\"C\" curve for out going circuit in existing DBs all as specified and as directed. |
| 10 | Excavatioin in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and taking out hard/dense soil for laying of cable /erection of pole/stay pit excavation. |
| 11 | Returning and filling including spreading levelling watering and well ramming in layers not exceeding 25 cm. |
| 12 | Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point. |
| 13 | M & L sand filling in-trenches with clean dry sand unwashed including gently pruning around cables complete all as specified. Note:-punned thickness only measured for payment. |
| 14 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core. |
| 15 | Supply & fixing tubes (for cable) \"medium grade\" 40 mmgalvanised with all fittings laid in trenches, wall, floor, complete all as specified and as directed. |
| 16 | Cutting of bituminus/PCC road for passing of cable and making good to the road by using PCC concrete as required at site complete all as directed. |
| 17 | Supply and laying GI pipe 50 mm bore medium grade ISI marked including all fittings in old/new position as in walls and ceilling/trenches/laid in floor complete all as specified & directed. |
| 18 | Description all as per Srl item No17.00 here-in-before but 25mm bore |
| 19 | Description all as per Srl item No 17.00here-in-before but20 mm bore |
| 20 | Description all as per Srl item No 17.00 here-in-before but15 mm Bore |
| 21 | Supply and fix 50mm bore gun metal gatevalve with iron wheel head screwedboth ends for iron pipe , ISI marked , as per IS : 778complete all as specified and directed. |
| 22 | Description all as per Srl item No 21.00 here-in-before but 20 mm bore |
| 23 | Material and labour for cutting of existing 150 mm DI/CI pipe line and making connection 50 mm GI pipe with reducer all as specified and directed. |
AI Tender Summary
Tender Timeline
Sep 25, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 18, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender