Flood Protection And Mitigation Work Of Repairing Of Srikantha Sluice On Right Embankment Of River New Cossye Damaged Due To Heavy To Very Heavy Rainfall From 28.07.2021 To 30.07.2021 In Mouza Srkantha Block Panskura
Tender Value
5.33 Lakhs
Estimated cost
Bid Submission
05 Oct 2021
0 days left
EMD
10671
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srikantha → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Flood Protection And Mitigation Work Of Repairing Of Srikantha Sluice On Right Embankment Of River New Cossye Damaged Due To Heavy To Very Heavy Rainfall From 28.07.2021 To 30.07.2021 In Mouza Srkantha Block Panskura
BOQ
| Sl. No. | Item Description |
| 1 | Takingoutsluicegatedrawshuttergearing arrangements & pedestal including refittingthe samewithnewnuts&bolts where necessary. (c) Above 7 sqm.(ii) Taking out only. |
| 2 | Taking outflapshutter ofsluice gate includinghoisting arrangementsand refitting the same with new nuts & bolts where necessary(b) Above 4 sqm. and upto 7 sqm.(ii) Taking out only. |
| 3 | Taking out runner of any sectionincludingcuttingboltsandnuts, dismantlingexistingconcreteorbrick work where necessary. |
| 4 | Supplying / Replacing including fitting & fixing at site new Cast Iron guide channel true to the line & level for draw shutters of sluices as per drawing & direction of theEngineer-in-charge with Cast Iron holdfast not more than 1 Metre apart including two coats of anti-corrossive bituminous paintof approved make and brand over two coats of red lead primer. (Rate is inclusive of taking out of old guide channels, if required)\" |
| 5 | Supplying,fitting,fixingMildSteel draw shutter withMild Steel plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections forsluice including fabricating the same(asperdrawingandinstruction given by the Engineer- in-charge) excluding cost of Mild Steel guide channel, sill beam, gearing arrangement etc. but including painting with two coats of anticorrosive bituminous paint of approved make & brand over two coat of red lead primer and with necessary masonry work with all materials supply etc. complete at site. |
| 6 | Supplying,fitting,fixingMildSteel flap shutter withMild Steel plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections forsluice including fabricating the same(asperdrawingandinstruction given by the Engineer- in-charge) including painting with two coats of anticorrosive bituminous paint of approved make & brand over two coat of red lead primer and with necessary masonry work with all materials supply etc. complete at site. |
| 7 | Supplying,fitting&fixinginposition rubber seal arrangements with musical note harmonic \"J\" type for making water tight in both up and down stream of draw shutter as well as flap shutter including guide paths, additional M. S. flats, bolts and nuts for fixing the rubber seal in position including fabrication cost and carriage of all materials to site and complete as per direction of the Engineer-in- charge.(b) Musical Note, Harmonic Type(ii) 127 mm x 6 mm |
| 8 | Supplying, fitting and fixing top runner fabricated by ISMB / ISMC of required size, 2 nos. for each gate of required length and fitting, fixing with required nos. of anchors / lugs by Mild Steel flat bar of required sizebifurcated at one end and welded withtheotherendwithtop runnerandprovidingwithrequired drilled holes of required dia. for base plateandallothercomponentsas required including carriage of all materialstosite complete including painting with two coats of anticorrosive bituminous paint of approved make and brand over two coats of red lead primer etc. all complete asperdirectionoftheEngineer-in- charge. |
| 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar(b) 15 mm thick plaster |
| 10 | Supplying / Replacing at site alloy steel bush for gearing arrangement of Mild Steel regulator shutter including fitting & fixing the same in Cast Iron wheel with bearing and necessary lubricant including cutting internal thread in the bush as necessary including cost of all materials, tools, labours and carriage to site complete of specified diameter as per direction of the Engineer - in - charge.(b) 65 mm. dia. |
| 11 | Supplying / Replacing Gear rod by a new Mild Steel Gear rod,threadedlength asrequiredand fitting,fixinginpositionwithscrew gearingarrangementfor operatingthe drawshutterincludingtakingoutold gear rod by cutting bolts etc. complete as per direction of the Engineer-in-charge. (The old materials to be returned to Departmental Godown.)( d) 65 mm Dia |
| 12 | Supplying / Replacing at site new pedestal or other similar items for sluices made with Mild Steel plates, angles, channels, holding down nuts & bolts etc. including fitting, fixing in position in concrete or masonry complete as per direction of the Engineer - in -charge. |
| 13 | Supplying fitting & fixing Mild Steel base plate of required size with necessary drilled holes of required dia. and number for fixing with the top runner and one number hole at the center of required dia. for screw rod duly threaded with necessary grooving for easy roller grip arrangement by 13 mm dia. high carbon steel balls in both Gun Metal or other bushes & base plate etc & providing with required bolts and nuts (Mild Steel) 16 mm dia & 100 mm long and one suitable screw as key, complete including painting with two coat of red lead Primer. |
| 14 | Earthwork from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as per profile. |
| 15 | Extra rate over Item No. 14 for all kinds of soil for every additional lead of 30 metres or part thereof beyond the initial lead of 30 metres.a) One extra lead |
| 16 | b) Two extra lead |
| 17 | Cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by Engineer-in-charge. |
AI Tender Summary
Tender Timeline
Sep 22, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 05, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender