Maintenance And Repair To Water Supply Distribution System At Ward No 72 And 100 In Zone No. 9
Tender Value
6.99 Lakhs
Estimated cost
Bid Submission
08 Oct 2021
0 days left
EMD
7000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
TOWN HALL AURANGABAD → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance And Repair To Water Supply Distribution System At Ward No 72 And 100 In Zone No. 9
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 MMJP/DSR/2019-20/Page no.33 I.No.1 |
| 2 | Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. roadincluding removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 MMJP/DSR/2019-2020/ Page No.33 I.No.3 |
| 3 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road by all means including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 MMJP/DSR/2019-2020/ Page No.33 I.No.5 |
| 4 | Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 MMJP/DSR/2019-2020/ Page No.34 I.No.7 |
| 5 | Providing and Supplying Asbestos Cement Pressure Pipes manufactured and tested as per ISO-160 standards of following class and diameter in standard lengths including cost of all taxes (Central and local), insurance,railway freight, inspection charges,unloading from railway wagon, loading into truck, transporting to departmental store/site, unloading, stacking etc. completeMJP/DSR/2012-2013/Page no.57. I.no. 1 |
| 6 | A) Class 15 ( Test Pressure 1.5 Mpa) |
| 7 | 80mm |
| 8 | 100mm |
| 9 | 150mm |
| 10 | 200mm |
| 11 | 250mm |
| 12 | 300mm |
| 13 | Lowering, laying and jointingwith CID joints, A.C. pressure pipes and CI or MS specials of following class and diameters including conveyance from stores to site of works, cost of labour and material, giving satisfactory hydraulic testing, etc. as per ISI code, etc. complete but excluding cost of C.I.D. joints, nut bolts, rubber rings. MJP/DSR/2012-2013/P.No.59I.no. 4 (A) |
| 14 | A) Class 15 ( Test Pressure 1.5 Mpa) |
| 15 | 80mm |
| 16 | 100mm |
| 17 | 150mm |
| 18 | 200mm |
| 19 | 250mm |
| 20 | 300mm |
| 21 | ProvidingD.I.Pipes ( push on joints pressure pipes of DIof following class and diameters confirming to the IS specification inclusive cost of jointing materials (rubber gasket of EPDM quality)excludingGST levied by GoI & GoM in all respect includingThird Party Inspection charges of TPI agency approved by MJP including transit insurance, Railway freight, unloading from railway wagon, loading into truck, transportation to departmental store/site of work, unloading, stacking etc. complete as directed by engineer incharge. (IS-8329:2000 for Pipes & IS-158:1969 & IS-12820:1989 or latest edition/revision with amendments for rubber gasket.) DI K-7 grade MJP/DSR/2019-2020/Page no.59 I.No.3 |
| 22 | 100 mm |
| 23 | 150 mm |
| 24 | 200 mm |
| 25 | Lowering, laying and jointing with SBR rubber gaskets C.I.& D.I. pipes of various classes with CI / MS specials of following diameters in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, excluding cost of jointing materials and rubber rings, including labour, etc complete. Note: Only SBR rubber gaskets to be used as per IS- 5382 / 12820MJP/DSR/2019-2020/Page no.58 I.No.2 (a) |
| 26 | 100 mm |
| 27 | 150 mm |
| 28 | 200 mm |
| 29 | Cutting and champhering of pipes of following diameters including cost of all materials and labour involved, etc. complete as directed by Engineer-in-charge. (for all class of pipes)MJP/DSR/2019-2020/Page no.136 I.No.20 |
| 30 | 100 mm |
| 31 | 150 mm |
| 32 | 200 mm |
| 33 | 250 mm |
| 34 | 300 mm |
| 35 | 350 mm |
| 36 | Providing and supplying C.I.detachable joints suitable for A.C. pressure pipes manufactured as per IS- 1538 / 1993 standards of following class and dimeter including cost ofinsurance, railway freight, inspection charges, unloading from railway wagon, loading into truck, transporting to departmental store, unloading, stacking and cost of rubber rings, nut bolts, excluding GST levied by GOI & GOM in all respect etc. complete. MJP/DSR/2019-2020/Page no. 64I.no.13 |
| 37 | Class 10 /15 |
| 38 | 80 mm |
| 39 | 100 mm |
| 40 | 150 mm |
| 41 | 200 mm |
| 42 | 250 mm |
| 43 | 300 mm |
| 44 | Providing and supplyingI.S.I. mark rubber gasket suitable for C.I. or D.I. pipe of all class for tyton joints including inspection charges, transportation upto departmental stores excluding GST levied by GOI & GOM in all respect etc. complete. MJP/DSR/2019-2020/Page no.137 I.No.21 (A) |
| 45 | 100mm |
| 46 | 150mm |
| 47 | 200mm |
| 48 | Supply of C.I. Mechanical Compression Collar Coupling suitable for C.I Spun Pipes ( as per IS-1536 /2001) and complete with sealing rubber gasket of SBR, C.I. follower Glands and M.S. nut bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS: 1538 / 1993MJP/DSR/2018-2019/Page no.140 I.No.2 |
| 49 | 100 mm |
| 50 | 150 mm |
| 51 | 200 mm |
| 52 | 250 mm |
| 53 | 300 mm |
| 54 | 350 mm |
| 55 | 400 mm |
| 56 | 450 mm |
| 57 | 500 mm |
| 58 | Checking & Repairing Private Water connection and reconnecting the same etc complete |
| 59 | Disconnection of unauthorised private water connection etc.complete. |
| 60 | Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line. ( The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores) MJP/DSR/2019-2020/Page no.47 I.No.10 |
| 61 | 80 mm |
| 62 | 100 mm |
| 63 | 150 mm |
| 64 | 200 mm |
| 65 | 250 mm |
| 66 | 300 mm |
| 67 | 350 mm |
| 68 | 400 mm |
| 69 | Providing double flanged Sluice Valves confirming to IS- 2906 / 14846 including worm gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.PN-1.0 ( without bypass arrangement)MJP/DSR/2019-2020/Page no.127 I.No.2 (A) |
| 70 | 80 mm |
| 71 | 100 mm |
| 72 | 150 mm |
| 73 | 200 mm |
| 74 | 250 mm |
| 75 | 300 mm |
| 76 | Lowering laying and jointing in position following C.I. D/F Reflux Valves, Butterfly Valves and Sluice Valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc complete.Sluice Valves MJP/DSR/2019-2020/Page no.130 I.No.4 |
| 77 | 80 mm |
| 78 | 100 mm |
| 79 | 150 mm |
| 80 | 200 mm |
| 81 | 250 mm |
| 82 | 300 mm |
| 83 | Providing and supplying Air Valves as per IS-14845 - 2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading in to truck, transportation up to departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. MJP/DSR/2019-2020/Page no.131 I.No.5 (a) |
| 84 | 20 mm |
| 85 | 25 mm |
| 86 | 32 mm |
| 87 | 40 mm |
| 88 | 50 mm |
| 89 | Lowering, laying and fixinging proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge includingcost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).MJP/DSR/2019-2020/Page no.132 I.No.10 (a) |
| 90 | 20 mm |
| 91 | 25 mm |
| 92 | 32 mm |
| 93 | 40 mm |
| 94 | 50 mm |
| 95 | Removing existing cross connection and remaking the same etc complete (70% Rate of making cross connection.) MJP/DSR/2019-2020/Page no.47. I.No.10 |
| 96 | 80 mm |
| 97 | 100 mm |
| 98 | 150 mm |
| 99 | 200 mm |
| 100 | 250 mm |
| 101 | 300 mm |
| 102 | 350 mm |
| 103 | 400 mm |
| 104 | Removing and refixing the half body of Sluice Valvesincluding excavation, refilling, cost of rubber packing, nut bolts, with gate, gland rope, repair by welding etc complete (70 % Rate of laying Sluice Valves ) MJP/DSR/2019-2020/ Page no.130 I.No.4 |
| 105 | 80 mm |
| 106 | 100 mm |
| 107 | 150 mm |
| 108 | 200 mm |
| 109 | 250 mm |
| 110 | 300 mm |
| 111 | 350 mm |
| 112 | 400 mm |
| 113 | 450 mm |
| 114 | 500 mm |
| 115 | Providing and supplying S.S. spindle rod as per standard specifications and suitable for Sluice Valves etc complete. (As Per Market rate ) |
| 116 | 80 mm |
| 117 | 100 mm |
| 118 | 150 mm |
| 119 | 200 mm |
| 120 | 250 mm |
| 121 | 300 mm |
| 122 | 350 mm |
| 123 | Providing and supplying Gun metal check nut of following diameter of Sluice Valves as per standard specifications, etc. complete |
| 124 | 80 mm |
| 125 | 100 mm |
| 126 | 150 mm |
| 127 | 200 mm |
| 128 | 250 mm |
| 129 | 300 mm |
| 130 | 350 mm |
| 131 | 400 mm |
| 132 | 450 mm |
| 133 | 500 mm |
| 134 | Repair the gate by welding to make it in orignal position etc comp |
| 135 | 100 mm |
| 136 | 150 mm |
| 137 | 200 mm |
| 138 | 250 mm |
| 139 | 300 mm |
| 140 | Providing and fixing M.S. extension rod as per site requirment to fix above existing sluice valve as directed by engineer in charge etc. complete. (As per Market Rate) |
| 141 | 100 mm |
| 142 | 150 mm |
| 143 | 200 mm |
| 144 | Providing and Supplying M.S. clamp for pipes of following diameters etc comp.(As Per Market rate ) |
| 145 | 80 mm |
| 146 | 100 mm |
| 147 | 150 mm |
| 148 | 200 mm |
| 149 | 250 mm |
| 150 | 300 mm |
| 151 | Providing and supplying ISI standard CI flanged / S & S specials excludingGST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truk, transport to departmental stores,unloading, stacking, etc. complete.C) Plain ended/plain ended branch flanged specials- i) 80 mm dia to 300 mm diaMJP/DSR/2019-2020/ Page no.60, I.No.6 (C) |
| 152 | Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint ( Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excludingGST levied by GOI & GOM in all respect includinginspection charges, transportation to stores and stacking, etc. complete.e) Plain ended specials or plain ended branch flanged specials of all diameters. MJP/DSR/2019-2020/Page no.61 I.no.7(e) |
| 153 | ProvidingISI mark G.I. pipe of following class and diameter excluding GSTlevied by GOI & GOM in all respect includinginspection charges, transportation to stores, etc. complete as per IS-1239 / 2004(Note :- One coupler shall be provided with each full length of pipe cost of which is included in rates below) Medium Class.MJP/DSR/2019-2020/Page no.71, I.No.1, (b) |
| 154 | 15 mm |
| 155 | 20 mm |
| 156 | 25 mm |
| 157 | 50 mm |
| 158 | 80 mm |
| 159 | 100 mm |
| 160 | Lowering, laying and jointing G I pipes and specials of following class and diameter including conveyance from stores to site of works, all labour etc. complete, either underground or in vertical position, as directed by Engineer-in-charge. MediumClass.MJP/DSR/2019-2020/Page no.72, I.No.2 ( b ) |
| 161 | 15 mm |
| 162 | 20 mm |
| 163 | 25 mm |
| 164 | 50 mm |
| 165 | 80 mm |
| 166 | 100 mm |
| 167 | Dismantlling dead pipe line ofMS/RCC/CI/PSC and GI /AC/ PVC/SW/HDPE pipe including cost of necessary excavation & refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-charge with al leads and lifts including cleaning the surface, etc complete. A) MS/RCC/CI/PSC/DI pipes.MJP/DSR/2019-2020/Page no.48 I.no.11 (A) |
| 168 | 100 mm |
| 169 | 150 mm |
| 170 | 200 mm |
| 171 | 250 mm |
| 172 | 300 mm |
| 173 | 350 mm |
| 174 | Dewatering the excavated trenches and pools of water in the pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.MJP/DSR/2019-2020/Page no.35 I.no.14 |
| 175 | Providing & laying in situ cement concrete M-15/1:2:4 of trap/granite/ quartzite/ gnessmetal for foundation and bedding including dewatering, compacting and curing etc. complete. PWD/DSR/2015-16/P.NO 287 I no 29 |
| 176 | Providing and Supplying in standard lengths ISI mark rigid unplasticised PVC pipes excluding GST levied by GoI & GoM in all respect. Working Pressure 6 Kg/Sq.cm.MJP/DSR/2019-2020/Page no.65 I.no.1(b) |
| 177 | 63 mm |
| 178 | 75 mm |
| 179 | 90 mm |
| 180 | 110 mm |
| 181 | 140 mm |
| 182 | Lowering laying and jointing PVC pipes and specials of following class and diameter etc. complete (with cement solvent joint / ring fit joint ) MJP/DSR/2019-2020/Page no.69 I.no.4(b) |
| 183 | 63 mm |
| 184 | 75 mm |
| 185 | 90 mm |
| 186 | 110 mm |
| 187 | 140 mm |
| 188 | Providing and making lead caulked joint with molten lead to Cast Iron pipes and / or specials of all classes and fitting of following dia including cost of lead and all jointing material, labour, hydraulic testing etc. complete.MJP/DSR/2019-2020/Page no 60 I.no.4 |
| 189 | 250 mm |
| 190 | 300 mm |
| 191 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc.complete.MJP/DSR/2019-2020/Page no.36 I.No.15 |
AI Tender Summary
Tender Timeline
Sep 24, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 11, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender