|
| 1 | Note:- (i) Contractors attention is invited to the point that entire requisite quantity of Exterior Emulsion paint, primer, OBD and wall care putty as catered in this BOQ shall be brought by the contractor in one go after approval of sample, in sealed manufacturer packing within 15 Days of date of commencement stipulated in work order No 1 and handed over to Engineer-in-Charge. |
| 2 | (ii) Engineer - in - Charge will keep the material after marking on its container, in safe custody and same will be issued to contractor as per site requirement. Entire quantity of Acrylic Emulsion paint, synthetic enamel paint, epoxy paint, plastic emulsion paint, primer, OBD and wall care putty etc will be recorded in MB as NOT TO BE ABSTRACTED. Quantity of above said material shall be calculated based on manufacturer\"s instruction and contractor shall submit necessary documentary evidence to Engineer-In-Charge in support of consumption of material as per manufacturer instruction |
| 3 | Note for Item No.6 to 8 :-The work shall be executed to high rise structure of height up to 12 metre from ground level. Quoted rate shall be deemed to include for all kind of scaffolding and safety equipment provided to workers deployed by the contractor and no extra amount will be paid by the department for the same.Note for item No 6,7 & 18:- Contractor shall submit three years performance guarantee for Acrylic emulsion (exterior weather coat) paint on bond paper, Contractor shall also submit security deposit amount i.e. 2.5% of executed amount or Rs 6250.00 whichever is more in the form of FDR or the same shall be retained from Final Bill. |
| 4 | Note for item No 12:- Contractor shall submit five years performance guarantee for Epoxy paint on bond paper, Contractor shall also submit security deposit amount i.e. 2.5% of executed amount or Rs 6250.00 whichever is more in the form of FDR or the same shall be retained from Final Bill. |
| 5 | M&L for preparation of old decorated surface (Plastered or unplastered) by brooming down and applying one coat of white wash on walls including cornices all as specified and directed by Engineer-in-Charge |
| 6 | M&L for preparation of old decorated surface (Plastered or unplastered) by brooming down and applying one coat of white wash on ceiling all as specified and directed by Engineer-in-Charge |
| 7 | M&L for preparation of old decorated surfaces and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed by Engr-in-charge |
| 8 | M & L for complete removal of existing treatment on old surfaceof walls including brooming down / steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and cleaning with water and applying two coats of distemper oil emulsion over a coat of primer over and including cement based wall care putty on plastered wall surface complete. |
| 9 | All as per item No 4 above but on ceiling |
| 10 | M & L for complete removal of existing treatment on old surfaceof walls including brooming down / steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and cleaning with water and applying two coats of Acrylic emulsion (exterior weather coat) paint in camouflage pattern of any tint as approved over one coat of primer all as specified and directed |
| 11 | M&L for preparationof old decorated surfaces of walls including pilasters / cornices etc and applying one coat of Acrylic emulsion (exterior weather coat) paint in camouflage pattern of any tint as approvedall as specified and directed |
| 12 | M&L for prepration of old painted steel surfaces, exc 10 cm width or girthand applying one coat of synthetic enamel paint all as specified and as directed by Engineer-In-Charge. |
| 13 | M & L for complete removal of existing treatment from old surface of steel of any description over 10cm width / girth including brooming down / steel wire brushing, scrapping down smoke soot and removing dust / dirt / oil / grease etc and applying two coat of synthetic enamel paintover a coat of red oxide primer complete all as specified and directed by Engineer-In-Charge. |
| 14 | M&L for preparation of old painted wooden surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint all as specified and directed. |
| 15 | M&L for preparation of old treated/decorated wall/painted surface of stones, concrete, asbestos cement or plastered of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 16 | M & L for complete removal of existing treatment from old surface of steel of any description over 10cm width / girth including brooming down / steel wire brushing, scrapping down smoke soot and removing dust / dirt / oil / grease etc and applying twocoats of epoxy paintover a coat of compatible epoxy primer all as specifed and directed |
| 17 | M & L for complete removal of existing treatment on old surfaceof walls including brooming down / steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and cleaning with water and applying 2mm thick, layer of wall care putty on wall/ceiling and apply two coats of plastic emulsion over a coat of primer complete all as specified and directed |
| 18 | M & L for re-writing letters or figures (Block, Roman, Italic or Indian) n.exc. 30 cm height with synthetic enamel paint without showing brush mark, complete all as specified and as directed. |
| 19 | M&L for repairing the edge/corner of Chajja/roof projection and similar work by removing plaster width/girth not exc 150mm and making good with 10mm thick rendering in CM 1:3 to match with existing surface complete all as specified and directed |
| 20 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc including removal of debris to a distance exc 1.5 km but n.exc 2 km |
| 21 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 |
| 22 | M&L for preparation of plastered wall surfaces incl pilasters/cornices etc and applying two coats of Acrylic emulsion (exterior weather coat) paint in camouflage pattern of any tint as approved over one coat of primer all as specified and directed. |
