Public Health Engineering Department-PHED has published Barwala Town Augmentation Renovation Of Water Supply Scheme Old Water Works Distt Hisar Const Of Ic Inside Ww Laying Of 350 Mm Id Rcc Pipe Np2 Ic Bm Supporting Piller Bm Houdi For Ic Bm Ss Tank 1 No 025 Mld Rs Fb Laying Of Pl At Hw Laying Of Disty Sys Cid. Submission Date for this Tender is 30-09-2021. Pipe Laying Tenders in HISAR Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | PART-I Sub Head Pumping Machinery & all accessories Supply & Erection of Horizontal spindle split casing type pumping sets ofminimum Four (4) Star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase, 50 Hz andaccessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. A) Rawwater pump set2 No. 1250 Lpm , 12 mtr head7.50 BHP |
| 2 | Supply and fixing following CI D/F pipe and specials/ bell mouth/ including cost of joining materials, laying, jointing, refilling including making adequate support of masonry/concrete for delivery and suction pipe from bell mouth in the collecting tank upto the rising main laid by the Department as per plan shown from the foundatiion wall of pump chamber for all the raw water and clear water pumping sets at water works in position,as per specification given in schedule No.II For Pumping Machinery A) Detail of pipe andspecials a) CI D/F bends, Reducers, tees , tappers, tail piece blank flange etc. |
| 3 | 200 mm i/dfor suction & delivery pipe |
| 4 | C) Bell mouth 200 mm i/d |
| 5 | Supply, erection, testing and commissioning of Wall mounted electricalpanel board , fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900mm and 400mm deep having following items : For raw water pump sets for 1250 Lpm x 12 M head = 2 No. a) Main switch 19-25 Amp2 No. ((L&T, Siemens, ABB) b) Volt meter 100 x 100mm range 0 to 500 volt 2 No.(AE/KAPPA/L&T) c) Amp meter 100x100mm range 0 to 50 Amp 2 Nos(AE/KAPPA/L&T) d) CT 50/5 2 Nos (AE/KAPPA/L&T) e) VSS & ASS 2No. each of approved make f) SPP 2 No. of approved make g) Motor starter, star delta, 2 No. for 1250 LPM x12 M Head Motor(L&T Siemens, AAB) h) Capacitor of suitable capacity = 2 No i) Indicating Lamp-One set j) Change over switch3x25 Amp = 2 No |
| 6 | Supply erection, testing of ISI marked copper wire for 2 Nos motors with under ground system in PVC and flexible pipes copper wire size complete in all respects with accessories like thimble etc. (i) Raw water 10 sqmm3 core |
| 7 | Supply erection, testing of ISI marked Aluminium for 1 Nos panel boards from main switch to palen and wiring of panel with size 2 x 6 Sq mm (Aluminium3 ½) ISI marked completein all respects with accessories like thimble etc. complete in respects |
| 8 | Supply erection, testing oflight fittings including wire in the Pump Chamber with material upto 10 points including switch, button, plug, PVC conduit pipe & copper wire etc. as per approved specifications complete in respect |
| 9 | Providing and fixing exhaust fan 18" i/d (450 mm) complete with suitable G.I. sheet of approved make complete in respects |
| 10 | Providing and fixing ceiling fan 1400 mm (56") with speed adjuster of reputed make complete ( make Crompton, Usha, Bajaj, Orient) complete in all respects |
| 11 | Supply erection, testing of reputed make CFL vapour light 100 watts with fittings and accessories complete in respects. |
| 12 | Distribution System A) DI plain Ended Tees, Bends, Reducers etc. for distribution system. |
| 13 | Taking out filter media Top & 2nd layer from filter beds & placing the same into filter beds after screening, washing & cleaning |
| 14 | Taking out filter media 3rd , 4th & Bottom layer from filter beds & placing the same after Screening, washing and cleaning. |
| 15 | Taking out Bed plates & placing the same after washing |
| 16 | Less credit of existing pump machinery |
| 17 | Less credit old bricks from S/S tank 85 cum Bricks 60%( 51 cum x 480 Bricks) |
| 18 | Bricks Ballast 40% ( 34 cum) |
| 19 | PART-II Rapid Sand Filter Bed ( 0.25 MLD) Rapid Sand FilterationPlantRCCProviding and installing water purification plant of 0.25 MLD (0.06 MGD) capacity at Old Water Works Barwala Town comprising of CI pipe from raw water main/pump, inlet box, inlet channel, alum dozing, flash mixing, tapered floculator, rectangular setting tank, filter box, over head reservoir for back wash including pump sets and electric control panel, waste water tank including pump sets and electric control, sluice valves, CI pipes, CI specials, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed complete in all respect O&M for five year Specification of Rapid Sand filteration as under : Annexure "A" attached. a) Top layer Fine sand screened, cleaned, washed and graded with the following specification from quarry or Jhansi (M.P.) i) Sand shall be of hard and resistant quart or quartzite and free of clay fine particules, shoft grains and dirt of any description. ii) Effective size shall be from 0.35 to 0.55mm iii) Uniformity coefficient shall not be more than 1.20 to 1.80 iv) Ignition loss should not exceed 0.70 percent by weight v) Soluable fraction in hydrocholoric acid shall not exceed 5% by weight vi) Silice content should be not less than 99.7% vii) Specific gravity shall be in the range between 2.25 to 2.65 viii) Wearing loss shall not exceed 3% b) IIndlayerGravel washed and screened, graded from 5mm-2mm (from approved quarry) c) IIIrdlayerGravel washed and screened, graded from 12mm-5mm (from approved quarry) d) IVthlayerGravel washed and screened, graded from 20mm-12mm (from approved quarry) e) VthlayerGravel washed and screened, graded from 38mm-20mm (from approved quarry) f) Bottom layerGravel washed and screened, graded from 65mm-38mm (from approved quarry) 2 Providing and fixing cast iron detachable joints duly ISI marked confirming to IS 8794/1978 with upto date amendments suitable for AC pressure pipe Class-15, each joints shall consists of two No. cast iron flanges, One No. cast iron center collar, required No. of nuts and bolts and two No. of rubber sealing rings antic mite quality.The rubber sealing shall be IS 5382/1985 and IS-10292/1988 with upto date amendments .The nut and bolt shall be as per IS 1363-1984 i) 100mm ii) 150mm iii) 200mm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
