Construction Of Nursing College And Para Medical Science College To Govt. Medical College At Dewanbagh Srinagar ( Fourth Floor Of College Building Only )
Tender Value
1.62 Crore
Estimated cost
Bid Submission
28 Sep 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dewanbagh_Srinagar → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Nursing College And Para Medical Science College To Govt. Medical College At Dewanbagh Srinagar ( Fourth Floor Of College Building Only )
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying cement concrete 1:2:4(1 Cement: 2 coarse sand: 4 graded Stone aggregate 20mm nominal size) (crushed) excluding cost of centering and shuttering all work up to floor V level . |
| 2 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to 13:15622of approved make in all colours and shades, laid on 20mmthick cement mortar 1:4 (I cement :4 coarse sand)including grouting the joints with white cement andmatching pigments etc. including all carriages complete 60X 60cm size |
| 3 | Brick work with common burnt clay FPS non modular bricks of class designation 75 upto floorV level in cement mortar 1:6 (1 cement :6 coarse sand) |
| 4 | 15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6(1 cement:6 coarse sand) |
| 5 | 15 mm Cement plaster on the rough/fair side of single or half brick wall of mix: 1:6(1 cement:6 coarse sand) including cost of scaffolding and repairing to carriages to external walls caused during course of work complete |
| 6 | Extra over item no 5 for plastering exterior walsl of teh height more than 10 mtr from the ground level for additional heught of 12 mtrs including cost of sacffolding charges complete |
| 7 | Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mmmade of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T”runners to be suspended from ceiling using GI slotted cleats of size27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips ofsize 85x30x0.8 mm spaced at 1200mm center to center along size85x30x0.8 mm spaced at 1200mm center to center along main T, bottomexposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. Work complete in all respect as per the drawing to the satisfaction of Engineer in-charge or Project Officer. |
| 8 | Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in-charge. With resin bonded fiber glass wool with density 24 kg/cum |
| 9 | P/L/F heavy duty Glass Fiber reinforced PPR(Polypropylene Random-Copolymer)pipesof approved quality with solvent weld socket joints necessary excavation,backfilling fixing with clamps,driling holes in walls,slabs,hydraulic testing complete job. |
| 10 | 25 mm pipe |
| 11 | 32 mm pipe |
| 12 | 40 mm pipe |
| 13 | P/L/F heavy duty Glass Fiber reinforced PPR(Polypropylene Random-Copolymer) fittings of approved quality with solvent weld socket joints such as sockets ,back nuts,elbows,bends,tees,reducers,enlargers,plugs,clamps,transition,Bushing,unions etc |
| 14 | 40mm Tee |
| 15 | 40mm Elbow |
| 16 | 40 x 1 1/4 M.T.A |
| 17 | 40 x 11/4 F.T.A |
| 18 | 32mm union |
| 19 | 32mm Tee |
| 20 | 32mm Socket |
| 21 | 25mmx 1/2M.Elbow |
| 22 | 25mmx 1/2F.Elbow |
| 23 | 25mm Elbow |
| 24 | 25mm x 1/2 Tee |
| 25 | 25mm x 1/2 M.T.A |
| 26 | 25MM X 1/2 F.T.A |
| 27 | 25mm Tee |
| 28 | 25mm Socket |
| 29 | 25mm Union |
| 30 | 25mm Elbow |
| 31 | 25mm Tee |
| 32 | 25mm Socket |
| 33 | 25mm x 1/2 F.T Elbow |
| 34 | 25mm x 1/2 F.T Tee |
| 35 | 25mm x 1/2 F.T Adapter |
| 36 | 25mm x 1/2 M.T Adapter |
| 37 | 25mm x 1/2 M.T Elbow |
| 38 | 25mm x 1/2 M.T TEE |
| 39 | 32mm Pipe Elbow |
| 40 | 32mm Pipe Tee |
| 41 | 32mm x 25mm Tee |
| 42 | 32mm x 25mm Reducer |
| 43 | 32mm x 1/2 F.T Tee |
| 44 | 32mm x 1/2Elbow |
| 45 | 25mm Endclap |
| 46 | 32mm Endlap |
| 47 | 25mm overlap |
| 48 | 32mm X 1/2 F.tT Elbow |
| 49 | 1/2 Tee |
| 50 | 1/2 socket |
| 51 | 25mm Cross Over |
| 52 | 40mm Socket |
| 53 | P/L/F heavy duty Glass Fiber reinforced PPR(Polypropylene Random-Copolymer) fittings of approved quality with solvent weld socket joints such as sockets ,back nuts,elbows,bends,tees,reducers,enlargers,plugs,clamps,transition,Bushing,unions etc |
| 54 | 100mm dia Door Tee |
| 55 | 100mm dia Plain Bend |
| 56 | 100mm dia Collar. |
| 57 | 100mm dia P-Trap |
| 58 | 100mm dia Plain Tee |
| 59 | 100mm dia Y- Tee |
| 60 | 100mm PVC Prince Cliff |
| 61 | 100mm PVC Cowl cap |
| 62 | 100mm Floor Trap |
| 63 | 100mm 4-way Floor Trap |
| 64 | 100mm 45 Deg Bend |
| 65 | 100x75mm Reducer |
| 66 | 75mm dia Plain Bend |
| 67 | 75mm PVC Cowl cap |
| 68 | 100x160mm P-Tee |
| 69 | 100x160mm Door-Tee |
| 70 | 160mm Door Bend |
| 71 | 160mm Cliff |
| 72 | 100x160mm Reducer |
| 73 | 50mm Elbow |
| 74 | Providing and fixing of PVC soil/waste/ventellating pipes of Prince/Phenolex or equivalent make(Type-B) of following size as directed by the site Engineer including all carriages. |
| 75 | 100 mm dia pipes |
| 76 | 75 mm dia pipes |
| 77 | 50 mm dia pipes |
| 78 | P/F of 20 mm dia size ball valves/CV fully way valve make of cost brass including C.I well |
| 79 | Providing and fixing water closet squatting pan ( Indiantype W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (of approved make) with manually controlled device (handle lever) conforming to IS:7231, with all fittings C.I/M.S. brackets, 32mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required white vitereous china W.C. pan of size 580 mm including carriages(Hindustan or equivalent) |
| 80 | Providing and fixing white vitreous china pedestal typewater closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixing, complete including cutting and making good the walls and floors wherever requied W.C. pan with ISI marked white plastic solid seat and lid (Hindustan or equivalent) |
| 81 | P/F of 32 mm dia CP long bend for WC\"s |
| 82 | Constructing brick masonry manholes of size 18\"*18\" in cement mortar1:4 ( 1 cement : 4 coarse sand) , foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design including PVC frame with cover complete job including all carriages and costs. |
| 83 | Providing and fixing wash basin with pedastal (Jaguar/Hindware/Cera/Essal or equivalent)and making good the walls wherever required white vitrous china washbasin size 630*450including all carriages |
| 84 | P/F White viterous china Large Urinal 590mm x 375mm x 390mm of approved quality with partition as per product detail with Flushing system as per product detail with C I hangers,Bottle trap,waste coupling incl:cutting and making good the walls and floors wherever required of standard make or equivalent including all carriages . |
| 85 | Providing and fixing of stainless steel sink 600*450 *250 mm of standard make with CI brakets ,CP brass chain with rubber plug ,40 mm CP brass waste complete including painting fittings and brakets,cutting and making good the walls wherever required as directewd by site engineer including all carriages |
| 86 | Providing and fixing of CP fixtures of Jaguar /Hindware /Cera / Essel/Parko or equivalent make including jointing testing and making good to surfaceas directed by the site Engineer including all carriages. |
| 87 | C P SHORT BODY BIB COCK |
| 88 | C P ANGLE VALVE |
| 89 | C P PILLAR COCK |
| 90 | C P GRATING WITH ANTI COCKROACH TRAP BELOW THE GRATING HINGE TYPE |
| 91 | C PWASTE COUPLING |
| 92 | PVC WASTE PIPE |
| 93 | PVC CONNECTION 24\" LONG |
| 94 | C P SOAP CASE |
| 95 | CP CUPS |
| 96 | Providing and applying white cement basedputty (Birla or equivalent )of 2mm thickness over plastered surface to prepare the surface even and smooth including all carriages complete |
| 97 | Applying priming coat of cement primer of approved quality and manufacture |
| 98 | Wall painting with plastic emulsion paint including one coat of water thinnable cement primerof approved brand and manifacture to give an even shade.Two or more coats on new work including all carriages complete |
| 99 | Finishing walls with weather resistant exterior Epoxy paint of approved brand,manufacture and shade(two or more coat on new work) over and incl:base coat of water proofing cement primer including all carriages. |
| 100 | Providing and fixing Ist quality ceramic glazed tiles conforming to IS:13753 of minimum thickness 8mm of size 450x300mm of approved make like NITCO. ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slury @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material. |
| 101 | Providing and fixing ceramic Antiskid floor tiles 300x300 mm (thickness to be specified by the manufactures) of Ist quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, ivory, grey, fume Red,brown laid on 20mm thick be bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete inluding carriage of material(including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 102 | P/F of factory made UPVC Doors/Windows with three track sliding panel for windows with 5 mm clear glass and fly proof stainless steel wire mesh inclusive of outer frame 88X50 mm (Windows) 60X 70 mm (Doors)with extruded ,section having an overall dimensions,as below (tolerance +/-1 mm with wall thickness 2.3 mm +/-0.2 mm,corners of the door frame to be joined with galvanized brackets and stainless steel screws,joint metred and plastic welded.the hingesside vertical of the frames reinforced by the galvanized MS tube of size 19X19 mm and 1 mm +/-0.1 mm wall thickness and three number stainless steel hinges fixed to the frame complete as per manufacturers specifications and direction of Engineer-in-charge) including all carriages and cost of material involved. INCLUDING COST OF GAS FILLED TOUGHENED GLASS/PANELS FOR DOORS ONLY |
| 103 | P/F of 12 mm thick water proof ply in ceiling including all carriages leads and lifts |
| 104 | P/F of Budloo wood partitions in ceiling including all carriages leads and lifts |
| 105 | Preparing wooden surfaces by applying knifing grey paste filler of approved brand and manufacture to have a smooth and finishing surface |
| 106 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including applying priming coat with ready mixed pink or grey primer of approved brand and manufcature on wood work andall carriages complete . |
| 107 | Providingandfixingof wooden flooring (Pergo Make ) including fixing of 3- 4 mm thick foam including head load from groundfloor to fourth floorall Carriages leads lifts and all wastages including cost & carriage ofall materials complete. |
| 108 | Supply and installation of satin finish stainless steeAISI 304 stainless steel handrail and balustrade system having 38 mm dia tube haandrail (1.5 mm guage) weight 2.82 kg,erected with chemical grout to be fixed on the top of slab/skirting (Spigot Fixed) at max c/c distance of 60 mm complete with all necessary bends and terminations complete with cover plate,fixing end terminations ,custom bends as manufactured by Dline or approved equivalent & complete as per architectural drawings complete job including cost of master piller at appropriate spots as per directions of engineer in charge |
| 109 | Carriageof materialsby M.T |
| 110 | Sand and stone aggregate for an avg lead of 20 km |
| 111 | Bricksfor an avg lead of 20 km |
AI Tender Summary
Tender Timeline
Sep 22, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 30, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender