Construction Of Three No. Bus Ports At Mc Kokernag On Prescribed Locations.
Tender Value
33.54 Lakhs
Estimated cost
Bid Submission
28 Sep 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KOKERNAG → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Three No. Bus Ports At Mc Kokernag On Prescribed Locations.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 2 | Providing and laying hand packed stone solling including ramming and dressing including all leads lifts and all carriages complete |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size INCLUDING CARRIAGE . |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 7 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 8 | 12 mm thick cement plaster on ceilings, etc. in (1 cement: 4 fine sand mix). Upto floor V level complete in all respects (including cost of all material, leads, lifts and carriages etc. upto site of work complete) |
| 9 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 10 | Providing and fixing devri stone clading 25 mm thick with exposed face fine dressed with rough backing on wall lining etc. upto 10 meter ht back filled with a grout of 12 mm thick cement sand mortar in 1:3 (fine cheiseled)including pointing in white cement 1:2 with admixture of pigment matching to stone |
| 11 | Providing and fixing aluminium composite panels(ACP) made out of 5mm thick PVDF aluminium(0.5+4.0+0.5) matt finish panals on both sides (total thickness of the panel shall be 5mm) of approved make inclusive of aluminium section (30 micron) frame work out of 40 x 20 mm size rect section no 14019/88 from jindal aluminium ltd. Or equivalent approved all as per manufactures specification and details drawings and the grooves location etc .Complete in all respects as per the direction of engineer in charge(make Alucobond alstrong or renebend only) |
| 12 | Providing and Fixing of 50mm dia stainless steel railing of 304 grade of hallow tube 1.6 mm thick of Jindal/Salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape, buffing etc. Complete and fixing stainless steel balusters upto 900 mm height, newel post 1050 not less then hight 1050mm and S S tubes, three in one installed horizontally including cutting, welding, grinding to required shape and size by required steel dash fasteners, nuts, bolts, screws ,etc. in floors and treads including providing SS shoe at each balusters complete as per architectural drawings and as per the directions of engineer incharge including cutting of granite/marble floors and fastening with lead grouting if required, complete in all respects. |
| 13 | Providing & fixing of stainless steel nevel post (Ornamental ) including top ball of AISI 304 grade of required height duley anchored to floor with dash fasteners . Height of the nevel post shall not be less than 1050 mm above the finished skirting level all complete as per architectural drawings (including cost of all material, leads, lifts and carriages etc upto site of work complete).Complete as per the directions of Engineer incharge. |
| 14 | Providing colour coated sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.5 mm thick |
| 15 | Providing and fixing plain eves boarding (350mm x 40mm ) first class kal wood with necessary grooves and chamfer fixed with screws etc, including all carraiges .All job complete |
| 16 | Provide and fixingThermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineerin-charge.With Type SE-Self Extinguishing type 50 mm thick |
| 17 | Providing and fixing 12 mm thick frameless toughened glass of approved brand and manufacture, including providing and fixing top , bottom & sides with fiiting arrangement and making necessary holes etc. for fixing required all complete as per direction of Engineer-in-charge ( for waiting) |
| 18 | Providing and fixing of (FUNDERMAX , MARINO , STYLAM ) make exterior grade facade pannel of 6mm thick, made up of layers of kraft paper impregnanted with halogen free phenolice resine with both side special exterior grade decorative paper surface , impregnanted with melamine resins and with a protective INSTALLATION :- Providing and fixing of 6mm thick high prssure laminate (FUNDERMAX , MARINO , STYLAM ) on alluminium sub structure of 25 X 50mm minimum of hollow section @ 400mm distence or recommended by pannel manufecturer fixed to wall and ceiling using angle brackets and |
| 19 | Supplying and placing a three seater bench that shall be constructed from metal frame. The seat and back shall be made of high quality cold rolled MS sheet of 1.2m thick, pressed and welded to form the shape. The seat and back shall be electrostatically coated with 40-60µ thick epoxy powder and then cured under heat to allow it to form a skin. The seat and back shall have round perforated sheet i.e. 4.5mm Dia. hole. The seat shall be supported on 2.5mm thick CRCA powder coated hinge which is mounted over MS pipe having length 1600mm with cross-section area 50mm X 50mm with 2mm thick. The armrest shall be made up of MS powder coated 40mm width with 1mm thick. The base or leg shall be 49mm width made of 1mm thick CRCA powder coated sheet. There shall be leveler shoe provided with metal insert at the bottom to avoid scratches on the floor. The individual seat size shall be 415±10 mm(D) X 450±10 mm(W), seat height = 420±10 mm, overall width = 1600±10 mm, overall depth = 600±10 mm & overall height = 790±10 mm. The chairs must be fastned with anchor bolts The manufacturer shall have basic quality and safety certifications like ISO-9001:2015, ISO-14001: 2015, ISO-18001:2007, BIFMA Membership, |
AI Tender Summary
Tender Timeline
Sep 22, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 29, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender