|
| 1 | Complete servicing and repairing of Hot Water Generator of capacity 100000 kcal/ Hr. capacity by way of dismantling of boiler, cleaning /removing of soot and carbon deposits from the coil and shell of water boiler. The job includes as per SBD. |
| 2 | Complete servicing and repairing of Hot Water Generator of capacity 40000 kcal/ Hr. capacity by way of dismantling of boiler, cleaning /removing of soot and carbon deposits from the coil and shell of water boiler. The job includes as per SBD. |
| 3 | Replacement of refractory of 01 Lac Kcal/Hr Hot Water Generators: The job includes complete removal of old damaged refractory and thorough cleaning of refractory base. Mild steel hold-fasteners, wherever required, shall be welded to the refractory base. The job includes as per SBD. |
| 4 | Replacement of refractory of 40000 Kcal/Hr Hot Water Generators: The job includes as per SBD. |
| 5 | Repairs to existing mono block pump set single phase by way of replacement of damaged bearings, sleeves, shaft etc. The job also includesas per SBD. |
| 6 | Providing, installation and testing of fan coil units (1.5 ton capacity) of reputed make (Tecumseh make) at specified locations in direction office |
| 7 | Providing/Fitting of 05KVA copper wound Heavy duty automatic voltage stabilizer single phase 90 V– 290 V input for a constant output of 240 V, The Voltage stabilizer. The job includes as per SBD. |
| 8 | Providing, fitting and testing of 20 mm dia. PPR triple layer piping—15 mtr.( approx.). |
| 9 | Providing, fitting and testing of 20 mm dia. ball valves for PPR pipes. |
| 10 | Providing , fitting and testing of 40 mm dia. ball valves for PPR pipes. |
| 11 | Cleaning of boiler room by way of removing of mud and other foreign material which has got accumulated inside the boiler room. The job includes as per SBD. |
| 12 | P/L in position specified grade of reinforced cement conc. excluding the cost of centering & shuttering, finishing and reinforcement-All work upto plinth level in 1:1.5:3 (1 cement :1.5 coarse sand :3 graded stone agg.20mm nominal size) including all carriages upto site of work complete.Size 15’ x 8” x 6” |
| 13 | Centring, shuttering including strutting, propping etc. and removal of form for: foundations, footings, bases of columns etc. for mass concrete |
| 14 | Servicing to 1.5 T fan coil unit by way of dismantling of unit and then cleaning of fins, air filters, display sensor, controller plate, lubrication of motors etc. and then reassembling of the unit and testing of the same. |
| 15 | Repairs to the 100000 kcal/ Hr. hot water generator burner assembly “Eco-flam” by way of servicing of complete burner assembly. The job includes as per SBD. |
| 16 | Repairs to the 40000 kcal/ Hr. hot water generator burner assembly “Eco-flam” by way of servicing of complete burner assembly. The job includes as per SBD. |
| 17 | Providing & fitting of photocell for 4.1 Ecoflam Make Burner of Hot Water Generator to replace the damaged one. |
| 18 | Providing & fitting of photocell for 12.1 Ecoflam Make Burner of Hot Water Generator to replace the damaged one |
| 19 | Providing & fitting of 0.75 GPHnozzle for Ecoflam Make Burner of Hot Water Generator to replace the damaged one. |
| 20 | Providing & fitting of 2.5 GPH nozzles for Ecoflam Make Burner of Hot Water Generator to replace the damaged ones. |
| 21 | Providing & fitting of Digital Temperature Gauge for Hot Water Generators to replace the damaged ones. |
| 22 | Providing & fitting of Fuel connections to Hot Water Generators to replace the damaged ones. |
| 23 | Providing & fitting of 32A, 415V , C curve,2 pole MCB with 15 KA breaking capacity for electric panel of Main Boiler House for emergency replacement in case of fault. |
| 24 | Providing & fitting of 16A, 415V, C curve,2 pole MCB with 15 KA breaking capacity for electric panel to replace the damaged ones. |
| 25 | Providing & fitting of 10A, 415V, C curve,2 pole MCB with 15 KA breaking capacity for electric panel to replace the damaged ones. |
| 26 | Providing & fitting of 10A, 415V, C curve, MCB with 15 KA breaking capacity for electric panel to replace the damaged ones. |
| 27 | Providing & fitting of Oil Pressure Gauges (0-150) kg/cm2 of various Hot Water Generators to replace the defective gauges as per sample |
| 28 | Providing of Remote “Tecumseh” make as per sample |
| 29 | Providing and fitting of diesel filter assembly as per sample to the fuel supply line of Hot Water Generator to replace the damaged one |
| 30 | Providing/fitting of 5 inch dia / suitable size chimney for 40000 Kcal Hot Water Generator fabricated out of Galvanised steel sheet 24 Guage, 08 feet long to replace the damaged one. |
| 31 | Repairs to the Control panel by way of rectifying the locking arrangement, Providing/ fitting of indicator point, Minor wiring and Providing/fitting of multifunction meter to replace the damaged one. |
| 32 | Operation and maintenance of Central Heating Systems installed in the Offices of Chief Engineer, Kashmir I&FC Department and Superintending Engineer, Hydraulic Circle,at Engineering Complex, Rajbagh Srinagar” for the winter season 2020-2021 starting from November 15, 2021 till March 15, 2022The job includes as per the SBD. |
| 33 | Cost on account of manpower etc for operation and maintenance of above system for the winter season 2021-22. the job includes as per SBD. |
| 34 | Carriage and handling charges for HSD per litre issued by the department. HSD is to be carried from Petrol pump Jehlum Service Station at Lasjan Byepass in suitable containers which are to be arranged by Firm along with the measuring and siphoning tools/tackles. |
| 35 | Carriage and handling charges for coolant per litre issued by the department. HSD is to be carried from Petrol pump Jehlum Service Station at Lasjan Byepass in suitable containers which are to be arranged by Firm along with the measuring and siphoning tools/tackles |
