Military Engineer Services-MES has published Repair To Hard Standing, Pcc / Interlocking Pavers / Chequred Tiles Path, Compound Wall, Fencing, Steel Gate, Drain, Drain Covers, Culvert In Sector 31 At Brd Af Stn Chandigarh Under Ge ( Af ) Mc Chandigarh Repair To Hard Standing,. Submission Date for this Tender is 13-10-2021. Road Work Tenders in Chandigarh Chandigarh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Oct-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-10-2021 |
| Sl. No. | Item Description |
| 1 | Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, or in any position etc. and removal of rubbish outside MOD land and stacking of useful bricks/brickbats for credit or reuse, complete all as specified and directed |
| 2 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thick (below or above ground level), complete all as specified anddirected. |
| 3 | Material and labour for plain cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate, as in foundation filling and mass concrete, complete all as specified and directed. |
| 4 | Material and labour, brick work with fly ashbricks straight or curved on plan exceeding 6m mean radius, builtin CM (1:6), complete all as specified and directed. |
| 5 | Material and labour for brickwork with using retrievedsubclass "B" old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), except bricks,complete all as specified and directed. Note : Old serviceable bricks retrieved from demolition against srl item No 1 here-in-before shall be reused after proper cleaning & washing etc. |
| 6 | Material and labour for cement concrete (1:2:4), type B-0, using 12.5mm graded mechanically crushed stone aggregate as in coping, bed block, hold fast, benching, kerbs, mud stop, rounded or chamferred on edges including necessary form work/moulds complete all as specified anddirected. |
| 7 | Taking down cement plaster on brick or stone walls or concrete surfaces, etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land, complete all as specified and directed. |
| 8 | Material and labour for rendering 15mm thick in cement mortar (1:4), on brick/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed. |
| 9 | Material and labour for keyed pointing to brick wall in cement mortar 1:4, complete all as specified and directed. |
| 10 | Material and labour for broken glass coping on top of wall in cement mortar 1:3, complete all as specified and directed. |
| 11 | Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed. |
| 12 | Material and labour for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in hard standing, Path and paning, laid in alternate panels, finished even and smooth using extra cement, complete all as specified and directed. |
| 13 | Material and labour for spike rolling to surface or marking impressions of expanded metal, whilst the concrete is green, complete all as specified and directed. |
| 14 | Material and labour for 40mm thick sand filling for interlocking tiles including well rammed and consolidation, complete all as specified and directed. |
| 15 | M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to IS-15658 of 60mm thickness M-35 grade, laid over and includingsand cushion of 50mm thick,complete all as specified and directed. Note : (a)The Unit rate quoted is included for Demolition of Stone Slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar. (b) The manufacturer"s test certificate andindividual test certificate for tiles must be submitted for approval by the concerned authority prior to installation. Make:- Surya Kiran/NTC/NITCO |
| 16 | Material and Labour for PCC (1:2:4) type B-1, using 20mm graded crushed stone aggregates, as in packing of sides of interlocking paver blocks and chequered tiles , complete all as specified and directed. |
| 17 | M&L cement pavigres tiles 30cmx30cmx10mm thick machine pressed set jointed and pointed in neat cement slurry as in floors and cut and polished using grey cement andpigments over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) includingdemolition of existing tile complete all as specified anddirected. Note : The manufacturer"s test certificate for tiles must be submitted for approval by the concerned authority. Make:- Kajaria/Somany/Orient bell |
| 18 | Dismantling old posts or strutsmade of angle iron 40mmx40mmx6mm embedded in concrete block of any section, including taking out embedded portion and making good disturb ground, complete all as specified and directed. |
| 19 | Dismantling existing old GI wire 4mm dia as in fencing post including removing for replacing with chain link fencing, complete all as specified and directed. |
| 20 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil includingreturning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 21 | Material and Labour for PCC (1:3:6) type C-2, using 40mm graded crushed stone aggregates, as in foundation filling and mass concrete, complete all as specified and directed. |
| 22 | Material and Labour for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 23 | Supply and fixing mild steel galavanised chain link fencing of size 75mmx75mm and thickness made with GI wire of dia 4mm, complete all as specified and directed. |
| 24 | Supply and fix, mild steelbars 10mm dia & over,cut to length,bent to shaperequired as in chaim link fencing and binding with MS wire (annealed)of thickness not less than 0.9mmdia, complete all as specified and directed. |
| 25 | Supply and fixing, Mild steel screw bolts (machine made) of 12mm dia and 75mm length with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and directed. |
| 26 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed. |
| 27 | Material and labour for cutting holes in brick walls built in cement mortar for inserting holdfasts, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exceeding half brick but not exceeding one brick, and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, complete all as specified and directed. |
| 28 | Material and labour for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins, etc. including dismantling old barbed wire, complete all as specified and as directed. |
| 29 | Material and labour for applying two coats of synthetic enamel paint over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface, complete all as specified and directed. |
| 30 | Note:-Amount of credit ofRs. 35250.00for retrieved materials is mentioned in Schedule of Creditof tender documents in pdf form which will be deducted offline while acceptance of tender. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
