Military Engineer Services-MES has published Periodical Services, Allied Work And Repair To Flooring And Certain Repairs In Domestic Area At Af Stn Jaisalmer Periodical Services, Allied Work And Repair To Flooring And Certain Repairs In Domestic Area At Af Stn Jaisalmer. Submission Date for this Tender is 19-10-2021. Flooring Work Tenders in GE (AF) Jaisalmer Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Sep-2021 | BOQ | BOQ | 12-10-2021 |
| 2 | 12-Oct-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-10-2021 |
| Sl. No. | Item Description |
| 1 | Preparation of old decorated surfaces of walls of any description and applying one coat of white wash complete all as specified and directed. |
| 2 | Preparation of old decorated surfaces of ceilings of any description and applying one coat of white wash complete all as specified and directed. |
| 3 | Preparation of old decorated wall surfaces with smooth finished with wall care putty by washing, rubbing down and stopping of distempered and painted sufaces and applying one coat of oil emulsion distemper of any tint etc complete all as specified and directed. |
| 4 | Preparation of old decorated plastered surfaces of ceiling surfaces with smooth finished with wall care putty by washing, rubbing down and stopping of distempered and painted sufaces and applying one coat of oil emulsion distemper of any tint etc complete all as specified and directed. |
| 5 | Complete removal of existing treatment, filling up undulation and applying one layer ready mixed wall care putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coats of oil bound distemper of any tint over a coat of primer after smoothening of surfaces complete all as specified and directed. |
| 6 | Preparation of old painted wooden surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint of any tint etc complete all as specified and directed. |
| 7 | Preparation of old painted steel surfaces over 10cm in width or girth as in steel gate, swan neck fencing posts over perimeter compound wall, gates hangers, steel door etc and applying one coat of synthetic enamel paint with appropriated arrangements complete all as specified and directed. |
| 8 | 15mm thick internal plaster on walls in cement and sand mortar (1:6) on fair faces of stone masonry or concrete surfaces including taking down cement plaster complete all as specified and directed. |
| 9 | 5mm thick ceiling plaster in cement and sand mortar (1:3) on uneven faces of concrete surfaces on fair of ceiling and including taking down old cement plaster, complete all as specified and directed. |
| 10 | Preparation of newly plastered and unplastered surface of walls and applying two coats of white wash complete all as specified and directed. |
| 11 | Preparation of newly plastered or unplastered surfaces of ceiling surfaces and applying two coats of white wash on ceiling complete all as specified and directed. |
| 12 | Preparation of newly plastered surfaces of walls and filling up undulation and applying one layer ready mixed wall putty on entire surface of walls etc cutting and finishing with appropriate sand paper and and applying two coats of distemper oil emulsion over a coat of primer after soomthening of surfaces complete all as specified and directed. |
| 13 | Preparation of old treated/decorated wall surfaces of any description by brooming down or steel wire brushing scrapping down and applying two coat of plastic emulsion paint (1st quality in different tints/shades pattern any colours) complete all as specified and directed. |
| 14 | Preparation of old decorated plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed. |
| 15 | Vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement and sand mortar 1:6 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified |
| 16 | Vitrified ceramic tiles 10mm thick (square /rectangular), polished, coloured (light shade as approved) on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:3 including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed |
| 17 | Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed |
| 18 | Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed |
| 19 | Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed |
| 20 | Coloured glazed ceramic tiles in dado/skirting 300x450x6-7mm thick on vertical surfaces, dado and skirting over and including 15mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed |
| 21 | Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed. |
| 22 | 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in flooring to receive tile flooring complete all as specified and directed. |
| 23 | 15mm thick internal plaster in cement and sand mortar (1:6) on fair faces of stone masonry or concrete surfaces, finished even and fair and including taking down cement plaster complete all as specified and directed. |
| 24 | Rendering 15mm thick on fair faces of stone masonry or concrete surfaces in cement and sand mortar (1:4) with water proofing compound and finished even and smooth (without using extra cement) including taking down cement plaster including taking down cement plaster complete all as specified and directed. Note : Water proofing compound shall be measured and paid for separately. |
| 25 | 10mm thick ceiling plaster in cement and sand mortar (1:3) on uneven faces of concrete surfaces in ceiling, fineshed even and fair without using extra cement and including taking down old cement plaster, complete all as specified and directed. |
| 26 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. |
| 27 | Preparation of newly plastered or unplastered of wall surfaces and applying two coats of cement base paint of approved tint complete all as specified and directed. |
| 28 | Preparation of newly plastered or unplastered surfaces of ceiling surfaces and applying three coats of white wash on ceiling complete all as specified and directed. |
| 29 | Preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer of surfaces complete all as specified and directed. |
| 30 | Precast cement concrete (1:5:8), type C-1 (using 5 part 20mm and 3 part 12.5mm graded stone aggregate) as solid block masonary exceeding 10cm and set in cement and sand mortar (1:6), including demolition of brickwork or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars, precast concrete articles etc complete all as specified and directed. |
| 31 | Galvanized steel water tubing medium grade of 15mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed. |
| 32 | Galvanized steel water tubing medium grade of 20mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed. |
| 33 | Cutting chases, pinning in, making good to facings as original where required and pointing in cement and sand mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth in stone concrete blocks or slabs complete all as specified and directed. |
| 34 | Vitreous china squatting pan "Orissa Pattern" of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with P" or "S" trap complete including provision of PCC 1:5:10 bedding jointing and making good to floor and taking down old unserviceable complete all as specified and directed. |
| 35 | Vitreous china wash down water closet pan (Pedestal pattern), white coloured, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic water closet seat cover (white colour) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device including taking down old unserviceable complete all as specified and directed. |
| 36 | Flushing cistern PVC of capacity 10 Litres valve less syphonic action type, low level, white colour, with inlet, ball valve, float and handle including brackets complete with flush pipe fixed as in repair complete all as specified and directed. |
| 37 | Sink with draina board made of stainless steel 1mm thick for Kitchen or laboratory with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410mm x 330mmx160mm with all fitting and fixure fixed as in repair complete all as specified and directed. |
| 38 | PVC connection suitable for 15mm bore with PTMT nuts of 600mm length and including taking down old unserviceable complete all as specified and directed. |
| 39 | Conncealed stop valves, 15mm bore, chromium plated, cast copper alloy with adjustable wall flange, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed as in repair complete all as specified and directed. Make : Jaquar, Cat Part No. CON-083KN or equivalent. |
| 40 | Angle stop valves, 15mm bore fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed as in repair complete all as specified and directed. Make : Jaquar, Cat Part No. CON-053 KN or equivalent. |
| 41 | Wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting "Continental Range" and fixed as in repair complete all as specified and directed. Make : Jaquar, Model No. CON 273 KNUPR or equivalent. |
| 42 | Hand shower (health faucet) Abs body with 8mm dia one meter long flexible tube in chrome finish including wall hook wall work fixed as in repair complete all as specified and directed.. Make : Jaquar, Model No. ALD-CHR-585 or equivalent. |
| 43 | 15mm bore chromium plated Bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed as in repair complete all as specified and directed. |
| 44 | Stainless steel kitchen plate rack 1.00mm thick of size not less than 600x900x250mm fixed with stainless steel screws on wall properly as in repair complete all as specified & directed |
| 45 | Waste coupling of PTMT (half or full threaded) (minimum weight 60gms) suitable for stainless steel sink 40mm bore pipe fixed as in repair complete all as specified and directed. |
| 46 | 32mm bore waste fitting/ coupling, brass chromium plated for glazed ware sinks, basin etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed. |
| 47 | 15mm bore chromium plated shower rose with or without CP arms swivel joint, 75mm dia, including fixing to steel pipe or union and fixed as in repair complete all as specified and directed. |
| 48 | PVC Cabinet mirror of size 330mmx430mm with selected quality glass of approved quality overall accessories fixed as in repair complete all as specified and directed. |
| 49 | Plastic water closet seat cover (white coloured) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed as in repair complete all as specified and directed. |
| 50 | 32/40mm bore PVC flexible down take waste pipe length not less than 0.70m fixed to WHB, urinal or sink fixed as in repair complete all as specified and directed. |
| 51 | 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed. |
| 52 | 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls laid in floor or trenches in repair complete all as specified and directed. |
| 53 | 75mm bore PVC (SWR) bend any radius provided with access door fixed as in repair complete all as specified and directed. |
| 54 | 110mm bore PVC (SWR) bend any radius provided with access door fixed as in repair complete all as specified and directed. |
| 55 | 75mm bore PVC (SWR) Junction Single (Single Y) equal or unequal provided with access door fixed as in repair complete all as specified and directed. |
| 56 | 75mm bore PVC (SWR) Junction Single (Single T) equal or unequal provided with access door fixed as in repair complete all as specified and directed. |
| 57 | 110mm bore PVC (SWR) Junction Single (Single T) equal or unequal provided with access door fixed as in repair complete all as specified and directed. |
| 58 | PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement for trap fixed as in repair complete all as specified and directed. |
| 59 | Stack clamp made out of MS flat 50 mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 100mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces fixed in repair complete all as specified & as directed. |
| 60 | Rotational moulded polyethylene water storage tanks 500 Litre capacity triple layered (white cylindrical vertical with closed top) ISI marked, hoisted & fixed in position with ball valve of high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water storage tank complete all as specified and directed. |
| 61 | Rotational moulded polyethylene water storage tanks 1000 Litre capacity triple layered (white cylindrical vertical with closed top) ISI marked, hoisted & fixed in position with ball valve of high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water storage tank complete all as specified and directed. |
| 62 | Pre-laminated particle board 18/19mm thick (ISI marked), interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work cup board shutters, partions, shelves and similar work fixed as in repair complete all as specified and directed. |
| 63 | 6mm thick external teak wood beading / edging / lipping fixed with nails to block board for 18/19mm wide particle board complete all as specified & as directed. |
| 64 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified. |
| 65 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames), area exceeding 1.50sqm but not exceeding 4.00sqm each complete all as specified and directed. |
| 66 | Powder coated standard anodised aluminium extruded sections as in frames for chowkats, doors, windows shutters with style and rails or for fixed glazed partitions wall frame made to shape required fixed with 150mm long screw and rawl plug with one or more rebates including necessary joining cleats, glazing clips, rubber neoprene packing for fixing, anodised aluminium snap beading screws etc complete all as specified and directed. |
| 67 | Anodised aluminium extruded metal mesh of any size/shape for window/ventilator fixed in aluminium frame with aluminium snap beading, screws etc complete all as specified and directed. |
| 68 | Sheet glass selected quality 4.8mm thick (Tinted) and fixed to aluminium door/window in square exceeding 0.5 sqm in each pane fixed as in repairs, complete all as specified and directed. |
| 69 | Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 70 | 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 71 | Extruded aluminium alloy handle, cast type, anodised 150mm size complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
